Re: [PATCH 3/9] dt-bindings: regulator: add Qualcomm LCDB regulator

[Konrad Dybcio]

On 10/15/26 10:58 AM, Dmitry Baryshkov wrote:
> Several Qualcomm PMICs have an LCDB block providing the positive and
> negative bias rails for LCD panels. It is not supported by Linux, so
> boards using it either model the rails as dummy fixed regulators and
> depend on the state left by the bootloader.
> 
> Describe the LCDB regulator present on the PM8150L. Use it as a fallback
> compatible for LCDB blocks on PMI632 and PM6150L. PM660L has a different
> version of LCDB block, so it's not being covered.
> 
> Assisted-by: LLM
> Signed-off-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>
> ---

[...]

> +        lcdb@ec00 {
> +            compatible = "qcom,pm8150l-lcdb";
> +            reg = <0xec00>;
> +            interrupts = <0x5 0xec 0x1 IRQ_TYPE_EDGE_RISING>;
> +
> +            ldo {
> +                regulator-min-microvolt = <4000000>;
> +                regulator-max-microvolt = <6000000>;
> +            };
> +
> +            ncp {
> +                regulator-min-microvolt = <4000000>;
> +                regulator-max-microvolt = <6000000>;
> +            };

Let's tighten up the example to some specific voltage to reduce
room for poor copypastas

Konrad