Re: [PATCH v2 00/11] media: i2c: st-vd55g1: Genericize driver and add VD55G0 support

[Benjamin Mugnier]

Hi Peter,

Thank you for your work.

Le 19/09/2026 à 00:16, Peter Marshall a écrit :
> This patch series refactors the STMicroelectronics VD55G1 and VD65G4 image
> sensor driver (vd55g1) to abstract sensor differences and adds support for
> the VD55G0 monochrome sensor.

I read through your patches more closely, and I still think this is not
the best approach. So for the driver refactoring this will be a NAK for
me. I'll gladly take the ACPI parts though.

Sergey is currently working on bringing the vd55g0 downstream driver in
upstream, which I find a better approach. Not sure if you're working
together, if not I recommend getting in touch as it may suit your needs ?

> 
> The VD55G0 is used as the IR face ID sensor in devices such as the
> Microsoft Surface Pro 9, where it is found under ACPI HID `SMO55F0`. It
> features a native resolution of 644 x 604 pixels and differs from later
> variants in the family in several ways:
> 
> * It uses a different native resolution and register addresses mapping,
>   requiring specification of generational feature differences.
> * It lacks support for spatial and temporal HDR.
> * It requires an exposure duty cycle limit to keep the illuminator current
>   within safe levels.
> 
> Tested on a Microsoft Surface Pro 9 (an Intel IPU6 platform with ACPI
> HID "SMO55F0") running kernel 7.2.0 (changes cherry-picked) and libcamera
> 0.7.0. Builds successfully on linux-media next.
> 
> Key changes from the previous series:
> * The vd55g1 module is grown to support the extra hardware instead of
>   replacing it with a completely new driver.
> * The driver now includes a builtin patch array. External firmware loading
>   is no longer required.
> * Lower-level error messages are demoted to the debug level to keep kernel
>   logs clean and actionable.
> * Hardware registers are now fully abstracted, so operational logic never
>   needs to touch a raw CCI address.
> * Changes are broken into logical steps to improve clarity and make
>   bisection possible.
> * Rebased against linux-media next.
> 
> Peter Marshall (11):
>   dt-bindings: media: i2c: st,vd55g1: Move allOf: after required:
>   media: dt-bindings: i2c: vd55g1: Add vd55g0 compatible
>   media: ipu-bridge: Add VD55G0 to the list of supported sensors
>   platform/x86: int3472: Add VD55G0 supply GPIO mapping
>   media: i2c: st-vd55g1: Default to illuminator on GPIO 1
>   media: i2c: st,vd55g1: Handle virtual firmware graph endpoints
>   media: i2c: st-vd55g1: Clean up module error reporting
>   media: i2c: st-vd55g1: Unify frame timing calculations
>   media: i2c: st-vd55g1: Abstract sensor models, revisions, and features
>   media: i2c: st-vd55g1: Use indirect hardware register addressing
>   media: i2c: st-vd55g1: Support VD55G0 global-shutter image sensor
> 
>  .../bindings/media/i2c/st,vd55g1.yaml         |   34 +-
>  MAINTAINERS                                   |    1 +
>  drivers/media/i2c/vd55g1.c                    | 1667 +++++++++++++----
>  drivers/media/pci/intel/ipu-bridge.c          |    2 +
>  drivers/platform/x86/intel/int3472/discrete.c |   18 +
>  5 files changed, 1394 insertions(+), 328 deletions(-)
> 

-- 
Regards,
Benjamin