Re: [PATCH v4 1/2] dt-bindings: embedded-controller: Add synology,microp device

[Krzysztof Kozlowski]

On 21/03/2026 13:17, Markus Probst wrote:
> On Sat, 2026-03-21 at 11:21 +0100, Krzysztof Kozlowski wrote:
>> On Fri, Mar 20, 2026 at 11:09:53PM +0100, Markus Probst wrote:
>>> +
>>> +examples:
>>> +  - |
>>> +    #include <dt-bindings/leds/common.h>
>>> +
>>> +    embedded-controller {
>>> +      compatible = "synology,microp";
>>> +
>>> +      power-led {
>>> +        color = <LED_COLOR_ID_BLUE>;
>>> +        function = LED_FUNCTION_POWER;
>>> +      };
>>> +
>>> +      status-led {
>>> +        color = <LED_COLOR_ID_MULTI>;
>>> +        function = LED_FUNCTION_STATUS;
>>> +      };
>>
>> Where are other leds? Binding mentions 4.
>>
> Status and Power leds exist on every Synology NAS model I am aware of.
> But there are models which have additionally a usb or alert led. The
> device nodes for those leds should only be present, if they exist
> physically on the device.

Then help me to understand - are these different models?

EC is not a generic purpose component and is tightly coupled with the
actual board it is being present on. Unless exactly same board is used
in different models (unlikely) then the compatible defines the LEDs and
they are not needed in DT.

I should have brought this earlier, so apologies for that.

> 
>> Does that mean that they
>> differ on each device?  The EC is tied to specific model, so that would
>> be surprising. And if they do not differ, what is exactly the point of
>> describing the LEDs in DT?
> The color of the leds is different on some models.
> 
> I suppose I should add this information to the description.
> 


Best regards,
Krzysztof