Re: [PATCH] PCI: qcom: Advertise hotplug with no command completion support

[Krishna Chaitanya Chundru]

On 3/15/2026 3:39 PM, Manivannan Sadhasivam wrote:
> On Sat, Mar 14, 2026 at 07:26:34AM +0530, Krishna Chaitanya Chundru wrote:
> > QCOM PCIe controller advertise hotplug capability in hardware but do not
> > support hotplug command completion. As a result, the PCI core registers
> > the pciehp service and issues hotplug commands that never gets completions,
> > leading to repeated timeout warnings and multi-second delays during boot
> > and suspend/resume.
> >
> > Commit a54db86ddc153 ("PCI: qcom: Do not advertise hotplug capability for
> > IPs v2.7.0 and v1.9.0") avoided these timeouts by clearing the Hot-Plug
> > Capability bit entirely, which also disabled all hotplug functionality.
> Just some background: I added commit a54db86ddc153 to disable hotplug for Qcom
> PCIe Root Ports since we were seeing completion timeouts for hotplug commands
> and also the PRSNT# signal was not exposed on any of our SoCs. After checking
> with some internal folks I learned that hotplug functionality was not exercised
> in Linux. So these facts made me believe that hotplug was not suppored at all.
>
> But it turned out that the Qcom Root Ports support "Data Link Layer State
> Changed Events" such as DL_Up/Down events.
>
> > Instead of disabling hotplug, mark these controllers as not supporting
> > command completion by setting the No Command Completed Support (NCCS) bit
> > in the Slot Capabilities register. This prevents the PCI hotplug driver
> > from waiting for commands completion while still allowing hotplug-related
> > functionality such as Data Link Layer state change events.
> >
> > Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
> > ---
> >   drivers/pci/controller/dwc/pcie-qcom.c | 2 +-
> >   1 file changed, 1 insertion(+), 1 deletion(-)
> >
> > diff --git a/drivers/pci/controller/dwc/pcie-qcom.c b/drivers/pci/controller/dwc/pcie-qcom.c
> > index 67a16af69ddc75fca1b123e70715e692a91a9135..a2924610f3625f2456a491473c135840e31bafb9 100644
> > --- a/drivers/pci/controller/dwc/pcie-qcom.c
> > +++ b/drivers/pci/controller/dwc/pcie-qcom.c
> > @@ -358,7 +358,7 @@ static void qcom_pcie_clear_hpc(struct dw_pcie *pci)
> >   	dw_pcie_dbi_ro_wr_en(pci);
> >   
> >   	val = readl(pci->dbi_base + offset + PCI_EXP_SLTCAP);
> > -	val &= ~PCI_EXP_SLTCAP_HPC;
> > +	val |= PCI_EXP_SLTCAP_NCCS;
> Are you sure that this is the only non-supported capability? What about
> Attention, Presence, Power Fault, MRL etc...?
Even though there no signals required for attention, presence etc in the 
hardware
there is a way to generate these MSI's with these bits set through parf, 
so technically
so other co-processor in the system can trigger interrupts.

- Krishna Chaitanya.
> - Mani