Re: [PATCH v4 00/12] iio: frequency: ad9910: add IIO backend support

From: Jonathan Cameron

Date: Sun Nov 22 2026 - 13:13:16 EST


On Mon, 16 Nov 2026 16:39:52 +0000
Rodrigo Alencar via B4 Relay <devnull+rodrigo.alencar.analog.com@xxxxxxxxxx> wrote:

> This series extends the AD9910 DDS driver with support for an IIO backend,
> enabling data streaming through the parallel data port, and with control of
> the DRCTL pin, which defines the slope direction of the digital ramp
> generator (DRG).
>
> The parallel data port allows modulation of the DDS core parameters
> (amplitude, phase, frequency or polar) at up to the PDCLK rate, which is
> SYSCLK / 4. Such data rates require an FPGA IP core as the data source, so
> an AXI backend driver is added for the AD9910 HDL reference design. Besides
> streaming data from memory via DMA, the IP core also drives the PROFILE[2:0]
> and DRCTL pins. The latter is exposed as a PWM output, so that the frontend
> driver can consume it through the PWM framework without depending on the
> backend being present.
>
> The backend is optional: the AD9910 remains functional through the SPI
> control interface alone, hence the new devm_iio_backend_get_optional()
> helper.
>
> Signed-off-by: Rodrigo Alencar <rodrigo.alencar@xxxxxxxxxx>
Applied to the testing branch of iio.git. Still time for any last minute
feedback as I won't be pushing that out as togreg for a few days at least.

Thanks,

Jonathan