[PATCH net-next 0/3] net: stmmac: dwmac-sun8i: enable Flow Control

From: Maxime Chevallier

Date: Sun Nov 22 2026 - 09:50:09 EST


While running the "ethtool -t" selftests on H2+ (orangepi zero), the
Flow Control selftests consistently fails.

I originally blamed that on the fact that the board was connected to a
peer that didn't support Pause and that we didn't negotiate Pause at all.

The ethtool selftest are sensitive to what the Peer advertises even
though this is a full loopback test, but it is what it is :(

Since then, the orangepi zero I'm testing dwmac-sun8i on has been wired to
a proper peer, and the selftest still fails. This selftest sends tons of
frames in loopback and checks that Pause frames are generated, and
failing it means no pause frames were sent by the MAC.

Turns out, multiple things were missing in the dwmac-sun8i
implementation to get Flow Control to work.

Patch 1 allows independently setting RX/TX FC

Patch 2 is the one making FC actually work, by configuring the fifo
thresholds

Patch 3 sets the quanta values in the frames.

This seems to have never worked, so since it's not fixing a regression
I'm targetting net-next here.

This was tested only on H2+.

Thanks,

Maxime

Maxime Chevallier (3):
net: stmmac: dwmac-sun8i: allow controlling TX and RX flow control
separately
net: stmmac: dwmac-sun8i: emit pause frames when the RX FIFO fills
net: stmmac: dwmac-sun8i: configure the pause time for TX flow control

.../net/ethernet/stmicro/stmmac/dwmac-sun8i.c | 30 +++++++++++++++----
1 file changed, 25 insertions(+), 5 deletions(-)

--
2.56.1