Re: [PATCH v2 3/3] riscv: dts: spacemit: Add K3 eFuse and temperature trim cells

From: Aurelien Jarno

Date: Tue Nov 17 2026 - 16:10:47 EST


Hi,

On 2026-11-16 15:54, Jiayu Du wrote:
> Add the K3 eFuse controller with its AES_WTM clock and reset. Describe
> fixed-layout cells for the temperature calibration parameters stored in
> bank 0 and bank 7, using controller-relative offsets.
>
> Signed-off-by: Jiayu Du <duge1256@xxxxxxxxx>
> ---
> arch/riscv/boot/dts/spacemit/k3.dtsi | 23 +++++++++++++++++++++++
> 1 file changed, 23 insertions(+)
>
> diff --git a/arch/riscv/boot/dts/spacemit/k3.dtsi b/arch/riscv/boot/dts/spacemit/k3.dtsi
> index e89d2cc5ca8c..b548f5029d59 100644
> --- a/arch/riscv/boot/dts/spacemit/k3.dtsi
> +++ b/arch/riscv/boot/dts/spacemit/k3.dtsi
> @@ -1439,6 +1439,29 @@ saplic: interrupt-controller@e0804000 {
>
> /* sec_i2c3: 0xf0614000, not available from Linux */
>
> + efuse: efuse@f0702800 {
> + compatible = "spacemit,k3-efuse";
> + reg = <0x0 0xf0702800 0x0 0x400>;
> + clocks = <&syscon_apmu CLK_APMU_AES_WTM>;
> + resets = <&syscon_apmu RESET_APMU_AES_WTM>;
> +
> + nvmem-layout {
> + compatible = "fixed-layout";
> + #address-cells = <1>;
> + #size-cells = <1>;
> +
> + soc_rtemp_trim1: temperature-trim@120 {
> + reg = <0x120 0x1>;
> + bits = <0 8>;
> + };
> +
> + soc_rtemp_trim: temperature-trim@19a {
> + reg = <0x19a 0x2>;
> + bits = <4 8>;
> + };
> + };
> + };
> +
> mimsic: interrupt-controller@f1000000 {
> compatible = "spacemit,k3-imsics", "riscv,imsics";
> reg = <0x0 0xf1000000 0x0 0x10000>;

Thanks for this new version which is now enabled directly at the K3
level instead of the board level. This looks good to me, except the
offsets values, given my remark on the other patch.

Regards
Aurelien

--
Aurelien Jarno GPG: 4096R/1DDD8C9B
aurelien@xxxxxxxxxxx http://aurel32.net