[PATCH v2 09/15] HID: ft260: group sysfs attrs per HID interface
From: Michael Zaidman
Date: Fri Oct 30 2026 - 18:41:56 EST
Split the single sysfs attribute group into per-interface groups based
on chip mode (DCNF0/DCNF1):
- I2C-only (mode 1): I2C and GPIO attributes on the I2C HID interface
- Dual mode (0/3): hid_over_i2c_en, i2c_reset and clock on the I2C
interface; GPIO and UART attrs on the UART interface
- UART-only (mode 2): GPIO and UART attrs on the UART interface
Put i2c_enable on the UART group. In modes 0 and 3 ft260_gpio_init()
runs from the UART probe, so that interface registers the gpiochip. A
write to i2c_enable updates dev->gpio_en of the interface that owns
the attribute. On the I2C interface the write would re-mux GPIO0 and
GPIO1 on the chip and leave the gpiochip's mask unchanged, so the two
lines would stay unavailable.
Do not expose i2c_reset on the UART group (reported by Sashiko).
Signed-off-by: Michael Zaidman <michael.zaidman@xxxxxxxxx>
---
v2: i2c_enable moves to the UART group, which owns the gpiochip; UART
group drops i2c_reset (reported by Sashiko).
---
drivers/hid/hid-ft260.c | 60 ++++++++++++++++++++++++++++++++++-------
1 file changed, 51 insertions(+), 9 deletions(-)
diff --git a/drivers/hid/hid-ft260.c b/drivers/hid/hid-ft260.c
index 4106066b6a89..dca0250f2c25 100644
--- a/drivers/hid/hid-ft260.c
+++ b/drivers/hid/hid-ft260.c
@@ -1630,7 +1630,7 @@ static ssize_t i2c_reset_store(struct device *kdev,
}
static DEVICE_ATTR_WO(i2c_reset);
-static const struct attribute_group ft260_attr_group = {
+static const struct attribute_group ft260_i2c_chip_mode_1_attr_group = {
.attrs = (struct attribute *[]) {
&dev_attr_chip_mode.attr,
&dev_attr_pwren_status.attr,
@@ -1641,8 +1641,6 @@ static const struct attribute_group ft260_attr_group = {
&dev_attr_gpio2_func.attr,
&dev_attr_gpioa_func.attr,
&dev_attr_gpiog_func.attr,
- &dev_attr_uart_mode.attr,
- &dev_attr_uart_dcd_ri.attr,
&dev_attr_clock_ctl.attr,
&dev_attr_i2c_reset.attr,
&dev_attr_clock.attr,
@@ -1650,6 +1648,32 @@ static const struct attribute_group ft260_attr_group = {
}
};
+static const struct attribute_group ft260_i2c_chip_mode_0_3_attr_group = {
+ .attrs = (struct attribute *[]) {
+ &dev_attr_hid_over_i2c_en.attr,
+ &dev_attr_i2c_reset.attr,
+ &dev_attr_clock.attr,
+ NULL
+ }
+};
+
+static const struct attribute_group ft260_uart_chip_mode_0_2_3_attr_group = {
+ .attrs = (struct attribute *[]) {
+ &dev_attr_chip_mode.attr,
+ &dev_attr_pwren_status.attr,
+ &dev_attr_suspend_status.attr,
+ &dev_attr_power_saving_en.attr,
+ &dev_attr_i2c_enable.attr,
+ &dev_attr_gpio2_func.attr,
+ &dev_attr_gpioa_func.attr,
+ &dev_attr_gpiog_func.attr,
+ &dev_attr_uart_mode.attr,
+ &dev_attr_uart_dcd_ri.attr,
+ &dev_attr_clock_ctl.attr,
+ NULL
+ }
+};
+
static DEFINE_MUTEX(ft260_uart_list_lock);
static LIST_HEAD(ft260_uart_device_list);
@@ -2275,7 +2299,16 @@ static int ft260_i2c_probe(struct ft260_device *dev,
if (ret)
goto err_i2c_free;
- ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group);
+ ret = sysfs_create_group(&hdev->dev.kobj,
+ &ft260_i2c_chip_mode_1_attr_group);
+ if (ret < 0) {
+ hid_err(hdev, "failed to create sysfs attrs\n");
+ goto err_i2c_free;
+ }
+ } else if (cfg->chip_mode == FT260_MODE_ALL ||
+ cfg->chip_mode == FT260_MODE_BOTH) {
+ ret = sysfs_create_group(&hdev->dev.kobj,
+ &ft260_i2c_chip_mode_0_3_attr_group);
if (ret < 0) {
hid_err(hdev, "failed to create sysfs attrs\n");
goto err_i2c_free;
@@ -2341,12 +2374,14 @@ static int ft260_uart_probe(struct ft260_device *dev,
cfg->uart_mode = FT260_UART_CFG_FLOW_CTRL_NONE;
if (dev->chip_mode & FT260_MODE_UART ||
- dev->chip_mode == FT260_MODE_ALL) {
+ dev->chip_mode == FT260_MODE_ALL ||
+ dev->chip_mode == FT260_MODE_BOTH) {
ret = ft260_gpio_init(dev, cfg);
if (ret)
goto err_hid_report;
- ret = sysfs_create_group(&hdev->dev.kobj, &ft260_attr_group);
+ ret = sysfs_create_group(&hdev->dev.kobj,
+ &ft260_uart_chip_mode_0_2_3_attr_group);
if (ret < 0) {
hid_err(hdev, "failed to create sysfs attrs\n");
goto err_hid_report;
@@ -2464,11 +2499,18 @@ static void ft260_remove(struct hid_device *hdev)
dev->index);
ft260_uart_port_remove(dev);
if (dev->chip_mode & FT260_MODE_UART ||
- dev->chip_mode == FT260_MODE_ALL)
- sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group);
+ dev->chip_mode == FT260_MODE_ALL ||
+ dev->chip_mode == FT260_MODE_BOTH)
+ sysfs_remove_group(&hdev->dev.kobj,
+ &ft260_uart_chip_mode_0_2_3_attr_group);
} else {
if (dev->chip_mode == FT260_MODE_I2C)
- sysfs_remove_group(&hdev->dev.kobj, &ft260_attr_group);
+ sysfs_remove_group(&hdev->dev.kobj,
+ &ft260_i2c_chip_mode_1_attr_group);
+ else if (dev->chip_mode == FT260_MODE_ALL ||
+ dev->chip_mode == FT260_MODE_BOTH)
+ sysfs_remove_group(&hdev->dev.kobj,
+ &ft260_i2c_chip_mode_0_3_attr_group);
i2c_del_adapter(&dev->adap);
}
--
2.43.0