[PATCH v2 2/3] clk: meson: g12a: add the missing HDMI divider /4 alias

[Carlo Caione]

On G12A, HDMI PLL divider values 2 and 3 both select /4, but only value 2
is listed in the table. Reading value 3 therefore gives an unknown
divisor and an incorrect clock rate.

Add value 3 to the table. This also avoids a division by zero when the
read-only rate-rounding helper uses the value read from hardware.

Fixes: 7aa6c24697ef ("clk: meson: g12a: Limit the HDMI PLL OD to /4")
Reviewed-by: Jerome Brunet <jbrunet@xxxxxxxxxxxx>
Signed-off-by: Carlo Caione <ccaione@xxxxxxxxxxxx>
---
 drivers/clk/meson/g12a.c | 3 ++-
 1 file changed, 2 insertions(+), 1 deletion(-)

diff --git a/drivers/clk/meson/g12a.c b/drivers/clk/meson/g12a.c
index d0d4c7b6dc82..b23b9514fa91 100644
--- a/drivers/clk/meson/g12a.c
+++ b/drivers/clk/meson/g12a.c
@@ -779,12 +779,13 @@ static struct clk_regmap g12a_hdmi_pll_dco = {
 
 /*
  * G12/SM1 hdmi OD dividers are POWER_OF_TWO dividers but limited to /4.
- * A divider value of 3 should map to /8 but instead map /4 so ignore it.
+ * Divider values 2 and 3 both select /4.
  */
 static const struct clk_div_table g12a_hdmi_pll_od_div_table[] = {
 	{ .val = 0, .div = 1 },
 	{ .val = 1, .div = 2 },
 	{ .val = 2, .div = 4 },
+	{ .val = 3, .div = 4 },
 	{ /* sentinel */ }
 };
 

-- 
2.56.0