Re: [PATCH v10 0/6] rtc: s35390a: Allow use of output pin for interrupt signal 1 for wakealarm

[Alexandre Belloni]

On Wed, 30 Sep 2026 15:31:45 +0000, Markus Probst wrote:
> Add pinctrl to allow the use of output pin for interrupt signal 1
> for wakealarm. This is needed for wakealarms to work on Synology NAS
> devices.
> 
> I could only partially test the pinctrl patch. My testing system runs
> ACPI, which makes it impossible for me to configure pinctrl there. I did
> however verify that with missing pinctrl configuration in the devicetree,
> the register were correctly set. So there should be no regressions.
> Every other function than ignore, disable and wakeup should also be
> considered untested.
> 
> [...]

Applied, thanks!

[1/6] dt-bindings: rtc: Add pinctrl for S35390A
      https://git.kernel.org/abelloni/c/2166aaa173cd
[2/6] rtc: s35390a: Add missing newline to dev_err
      https://git.kernel.org/abelloni/c/a27b25bb9b42
[3/6] rtc: s35390a: Fix alarm not disabling
      https://git.kernel.org/abelloni/c/d93f29e41089
[4/6] rtc: s35390a: Read 24-hour mode on access
      https://git.kernel.org/abelloni/c/6199051016cd
[5/6] rtc: s35390a: Add pinctrl
      https://git.kernel.org/abelloni/c/cb4e92b15114
[6/6] rtc: s35390a: Add synology quirk
      https://git.kernel.org/abelloni/c/f6550426f21e

Best regards,

-- 
Alexandre Belloni, co-owner and COO, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com