Re: [PATCH v2] ASoC: qcom: audioreach: support multichannel PCM formats

[Prasad Kumpatla]

>   #define DRV_NAME "q6apm-dai"
>   #define POS_BUFFER_BYTES	4096
> @@ -344,7 +345,10 @@ static int q6apm_dai_prepare(struct snd_soc_component *component,
>   	cfg.num_channels = runtime->channels;
>   	cfg.bit_width = prtd->bits_per_sample;
>   	cfg.fmt = SND_AUDIOCODEC_PCM;
> -	audioreach_set_default_channel_mapping(cfg.channel_map, runtime->channels);
> +	ret = q6dsp_map_channels(cfg.channel_map, runtime->channels);
> +	if (ret)
> +		return ret;
> +
>   	if (prtd->state) {
>   		/* clear the previous setup if any  */
>   		q6apm_graph_stop(prtd->graph);
> @@ -1007,8 +1011,10 @@ static int q6apm_dai_compr_set_params(struct snd_soc_component *component,
>   		cfg.num_channels = 2;
>   		cfg.bit_width = prtd->bits_per_sample;
>   		cfg.fmt = codec->id;
> -		audioreach_set_default_channel_mapping(cfg.channel_map,
> -						       cfg.num_channels);
> +		ret = q6dsp_map_channels(cfg.channel_map, cfg.num_channels);
|
|
|q6dsp_map_channels()| changes the mono mapping from |PCM_CHANNEL_FL| to 
|PCM_CHANNEL_FC| and does not handle 7 channels. Have these cases been 
checked and confirmed to be supported as expected for AudioReach ?

Thanks,
Prasad

> +		if (ret)
> +			return ret;
> +
>   		memcpy(&cfg.codec, codec, sizeof(*codec));
>   
>   		ret = q6apm_graph_media_format_shmem(prtd->graph, &cfg);
> diff --git a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> index 83f2711bceea..fcc0267d3657 100644
> --- a/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> +++ b/sound/soc/qcom/qdsp6/q6apm-lpass-dais.c
> @@ -147,7 +147,9 @@ static int q6hdmi_hw_params(struct snd_pcm_substream *substream,
>   	cfg->bit_width = params_width(params);
>   	cfg->sample_rate = params_rate(params);
>   	cfg->num_channels = channels;
> -	audioreach_set_default_channel_mapping(cfg->channel_map, channels);
> +	ret = q6dsp_map_channels(cfg->channel_map, channels);
> +	if (ret)
> +		return ret;
>   
>   	switch (dai->id) {
>   	case DISPLAY_PORT_RX_0:
> @@ -173,11 +175,14 @@ static int q6dma_hw_params(struct snd_pcm_substream *substream,
>   	struct q6apm_lpass_dai_data *dai_data = dev_get_drvdata(dai->dev);
>   	struct audioreach_module_config *cfg = &dai_data->module_config[dai->id];
>   	int channels = hw_param_interval_c(params, SNDRV_PCM_HW_PARAM_CHANNELS)->max;
> +	int ret;
>   
>   	cfg->bit_width = params_width(params);
>   	cfg->sample_rate = params_rate(params);
>   	cfg->num_channels = channels;
> -	audioreach_set_default_channel_mapping(cfg->channel_map, channels);
> +	ret = q6dsp_map_channels(cfg->channel_map, channels);
> +	if (ret)
> +		return ret;
>   
>   	return 0;
>   }