Re: [PATCH 0/2] hwmon: (nct6683) Add fan control support for MSI boards with NCT6687D-R

[Guenter Roeck]

On 10/26/26 11:35, Hamza Mahfooz wrote:
> On Sun, Oct 04, 2026 at 11:32:48AM -0400, Hamza Mahfooz wrote:
> > Recent MSI boards (customer ID 0x20d) use an NCT6687D-R, whose fan
> > control registers differ from the ones used on Mitac boards, the only
> > boards for which the driver supports fan control so far. In addition,
> > the system fans of these boards are connected to channels 10-15, whose
> > duty cycle the driver does not report.
> >
> > This series adds fan control support for these boards, based on the
> > register map reverse engineered by the LibreHardwareMonitor project [1],
> > which uses it on MSI 800-series boards.
> >
> > Patch 1 reports the duty cycle of the system fans, and patch 2 adds fan
> > control support for the CPU, pump and system fan headers.
> >
> > Tested on an MSI PRO B850-P WIFI (MS-7E56, BIOS 2.A93, NCT6687D EC
> > firmware version 0.0 build 04/18/25), on top of kernel v7.3-rc5. Fan
> > control is available on pwm1, pwm2 and pwm13 to pwm16 on this board.
> >
> > [1] https://github.com/LibreHardwareMonitor/LibreHardwareMonitor/pull/2294
> >
> > Hamza Mahfooz (2):
> >    hwmon: (nct6683) Report the duty cycle of NCT6687D-R system fans
> >    hwmon: (nct6683) Add fan control support for MSI boards with
> >      NCT6687D-R
> >
> >   Documentation/hwmon/nct6683.rst |  17 +++
> >   drivers/hwmon/nct6683.c         | 233 +++++++++++++++++++++++++++++++-
> >   2 files changed, 244 insertions(+), 6 deletions(-)
> >
> > --
> > 2.56.0
>
> Ping?


Sorry, I was out of commission for a while, and I am still digging
through patches. Now applied.

Guenter