Re: [PATCH v2 5/5] soc: renesas: Kconfig: Select POWER_SEQUENCING_RENESAS_PWRRDY for RZ/V2H and RZ/V2N

[Bartosz Golaszewski]

On Fri, 9 Oct 2026 18:57:10 +0200, Prabhakar <prabhakar.csengg@xxxxxxxxx> said:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
>
> The RZ/V2H and RZ/V2N SYSC drivers register auxiliary devices for
> power sequencing, which require the pwrseq-renesas-pwrrdy driver to bind
> to them.
>
> Select POWER_SEQUENCING and POWER_SEQUENCING_RENESAS_PWRRDY from the
> RZ/V2H and RZ/V2N SYSC configurations so the power sequencer driver is
> built whenever SYSC support for these SoCs is enabled.
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@xxxxxxxxxxxxxx>
> ---
> v1->v2:
> - No change
> ---
>  drivers/soc/renesas/Kconfig | 4 ++++
>  1 file changed, 4 insertions(+)
>
> diff --git a/drivers/soc/renesas/Kconfig b/drivers/soc/renesas/Kconfig
> index b7abca4559df..32cd0d9c8758 100644
> --- a/drivers/soc/renesas/Kconfig
> +++ b/drivers/soc/renesas/Kconfig
> @@ -517,9 +517,13 @@ config SYS_R9A09G047
>  config SYS_R9A09G056
>  	bool "Renesas System controller support for R9A09G056 (RZ/V2N)" if COMPILE_TEST
>  	select SYSC_RZ
> +	select POWER_SEQUENCING

That's implied by the symbol below though?

Bart

> +	select POWER_SEQUENCING_RENESAS_PWRRDY
>
>  config SYS_R9A09G057
>  	bool "Renesas System controller support for R9A09G057 (RZ/V2H)" if COMPILE_TEST
>  	select SYSC_RZ
> +	select POWER_SEQUENCING
> +	select POWER_SEQUENCING_RENESAS_PWRRDY
>
>  endif # SOC_RENESAS
> --
> 2.55.0
>
>