Re: [PATCH v12 0/6] Enable ICE clock scaling

[Abhinaba Rakshit]

On Mon, Aug 24, 2026 at 01:17:37AM +0530, Abhinaba Rakshit wrote:
> Introduce support for dynamic clock scaling of the ICE (Inline Crypto Engine)
> using the OPP framework. During ICE device probe, the driver now attempts to
> parse an optional OPP table from the ICE-specific device tree node for 
> DVFS-aware operations. API qcom_ice_scale_clk is exposed by ICE driver
> and is invoked by UFS host controller driver in response to clock scaling
> requests, ensuring coordination between ICE and host controller.
> 
> For MMC controllers that do not support clock scaling, the ICE clock frequency
> is kept aligned with the MMC controller’s clock rate (TURBO) to ensure
> consistent operation.
> 
> Dynamic clock scaling based on OPP tables enables better power-performance
> trade-offs. By adjusting ICE clock frequencies according to workload and power
> constraints, the system can achieve higher throughput when needed and 
> reduce power consumption during idle or low-load conditions.
> 
> The OPP table remains optional, absence of the table will not cause
> probe failure. However, in the absence of an OPP table, ICE clocks will
> remain at their default rates, which may limit performance under
> high-load scenarios or prevent performance optimizations during idle periods.
> 

Konrad, can you please review all the patches in this patcheseries and let me know
if anything is pending?

Abhinaba Rakshit