Re: [BUG] usb-storage: 14cd:1212 returns incorrect data after large READ(10)

[Alan Stern]

On Tue, Oct 13, 2026 at 09:41:22PM +0800, Xuntao Chi wrote:
> Hello,
> 
> I would like to report a deterministic silent read corruption issue with
> 14cd:1212 USB microSD readers and propose adding a MAX_SECTORS_64 quirk.
> 
> A READ(10) larger than 64 KiB can cause the following READ(10) to return
> data from the wrong LBA. The trigger I have found is that the second
> read starts 64 KiB beyond the end of the first read. Instead of honoring
> that gap, the reader returns data starting at the end of the first read,
> that is exactly 64 KiB before the requested address. Both commands complete
> successfully, but the returned payload contains erroneous data.
> 
> The same problem is observed on 3 physically separate readers purchased
> from 2 different OEMs, all identifying as 14cd:1212 and with the same
> serial.
> 
> Device and environments
> -----------------------
> 
>   VID:PID:         14cd:1212
>   idVendor:        Super Top
>   idProduct:       microSD card reader (SY-T18)
>   bcdDevice:       1.00
>   iManufacturer:   Generic
>   iProduct:        Mass Storage Device
>   iSerial:         121220160204
>   speed:           USB 2.0 high speed
>   driver:          usb-storage
>   logical blocks:  512 bytes
> 
> The error is reproduced on an arm64 machine running 6.18.54 kernel, the same
> machine running a 6.12.112 kernel, and an amd64 machine running 6.8.0
> kernel, and is confirmed directly using libusb.
> 
> This has been observed to cause data silent data corrupting when mounting an
> ext4 partition from the device, and setting max_sectors_kb=64 as a
> workaround fixes it completely.
> 
> Would adding a US_FL_MAX_SECTORS_64 quirk be appropriate? I retest against
> the latest mainline if needed.

Yes, that quirk would certainly be appropriate if it fixes the problem.

Note that you can test it with no changes to the kernel, by specifying 
the appropriate "quirks" module parameter for usb-storage.  For example, 
before plugging in the device, do:

	echo 14cd:1212:m >/sys/module/usb_storage/parameters/quirks

Alan Stern