[PATCH v2 37/53] mfd: ioc3: Cross the serial IRQs on the Origin 300 IO8

[Imre Kaloz]

On the IO8 base I/O board the 16550 at sregs.uarta raises
SIO_IR_SB_INT and the one at sregs.uartb raises SIO_IR_SA_INT. With
the usual mapping the console never receives, because the interrupt
it enables is never asserted.

Add an IO8 entry to ioc3_infos[] that registers the serial cells with
the two IRQ resources exchanged. The board was matched as CAD DUO and
printed "ioc3: CAD DUO"; it now prints "ioc3: IO8" and gets its serial
ports.

Signed-off-by: Imre Kaloz <kaloz@xxxxxxxxxx>
---
 drivers/mfd/ioc3.c | 67 +++++++++++++++++++++++++++++++++++++++++++---
 1 file changed, 63 insertions(+), 4 deletions(-)

diff --git a/drivers/mfd/ioc3.c b/drivers/mfd/ioc3.c
index 95794dc9931c..01c919c18b06 100644
--- a/drivers/mfd/ioc3.c
+++ b/drivers/mfd/ioc3.c
@@ -223,7 +223,37 @@ static struct mfd_cell ioc3_serial_cells[] = {
 	}
 };
 
-static int ioc3_serial_setup(struct ioc3_priv_data *ipd)
+/*
+ * The UART at sregs.uarta raises IOC3_IRQ_SERIAL_B on the IO8 and
+ * sregs.uartb raises IOC3_IRQ_SERIAL_A.
+ */
+static const struct resource ioc3_uarta_crossed_resources[] = {
+	DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uarta),
+		       sizeof_field(struct ioc3, sregs.uarta)),
+	DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_B)
+};
+
+static const struct resource ioc3_uartb_crossed_resources[] = {
+	DEFINE_RES_MEM(offsetof(struct ioc3, sregs.uartb),
+		       sizeof_field(struct ioc3, sregs.uartb)),
+	DEFINE_RES_IRQ(IOC3_IRQ_SERIAL_A)
+};
+
+static const struct mfd_cell ioc3_serial_crossed_cells[] = {
+	{
+		.name = "ioc3-serial8250",
+		.resources = ioc3_uarta_crossed_resources,
+		.num_resources = ARRAY_SIZE(ioc3_uarta_crossed_resources),
+	},
+	{
+		.name = "ioc3-serial8250",
+		.resources = ioc3_uartb_crossed_resources,
+		.num_resources = ARRAY_SIZE(ioc3_uartb_crossed_resources),
+	}
+};
+
+static int __ioc3_serial_setup(struct ioc3_priv_data *ipd,
+			       const struct mfd_cell *cells, int num_cells)
 {
 	struct ioc3 __iomem *regs = ipd->base;
 	int ret;
@@ -241,8 +271,8 @@ static int ioc3_serial_setup(struct ioc3_priv_data *ipd)
 	udelay(1000); /* Wait until mode switch is done */
 
 	ret = mfd_add_devices(&ipd->pdev->dev, PLATFORM_DEVID_AUTO,
-			      ioc3_serial_cells, ARRAY_SIZE(ioc3_serial_cells),
-			      &ipd->pdev->resource[0], 0, ipd->domain);
+			      cells, num_cells, &ipd->pdev->resource[0], 0,
+			      ipd->domain);
 	if (ret) {
 		dev_err(&ipd->pdev->dev, "Failed to add 16550 subdevs\n");
 		return ret;
@@ -251,6 +281,12 @@ static int ioc3_serial_setup(struct ioc3_priv_data *ipd)
 	return 0;
 }
 
+static int ioc3_serial_setup(struct ioc3_priv_data *ipd)
+{
+	return __ioc3_serial_setup(ipd, ioc3_serial_cells,
+				   ARRAY_SIZE(ioc3_serial_cells));
+}
+
 static const struct resource ioc3_kbd_resources[] = {
 	DEFINE_RES_MEM(offsetof(struct ioc3, serio),
 		       sizeof_field(struct ioc3, serio)),
@@ -601,6 +637,28 @@ static int ioc3_cad_duo_setup(struct ioc3_priv_data *ipd)
 	return ioc3_kbd_setup(ipd);
 }
 
+static int ioc3_io8_setup(struct ioc3_priv_data *ipd)
+{
+	int ret, io_irq;
+
+	io_irq = ioc3_map_irq(ipd->pdev, PCI_SLOT(ipd->pdev->devfn),
+			      PCI_INTERRUPT_INTB);
+	ret = ioc3_irq_domain_setup(ipd, io_irq);
+	if (ret)
+		return ret;
+
+	ret = ioc3_eth_setup(ipd);
+	if (ret)
+		return ret;
+
+	ret = __ioc3_serial_setup(ipd, ioc3_serial_crossed_cells,
+				  ARRAY_SIZE(ioc3_serial_crossed_cells));
+	if (ret)
+		return ret;
+
+	return ioc3_kbd_setup(ipd);
+}
+
 /* Helper macro for filling ioc3_info array */
 #define IOC3_SID(_name, _sid, _setup) \
 	{								   \
@@ -621,7 +679,8 @@ static struct {
 	IOC3_SID("IP30 System Board", IP30_SYSBOARD, &ip30_sysboard_setup),
 	IOC3_SID("IP34 System Board", IP34_SYSBOARD, &ip34_sysboard_setup),
 	IOC3_SID("MENET", MENET, &ioc3_menet_setup),
-	IOC3_SID("MENET4", MENET4, &ioc3_menet4_setup)
+	IOC3_SID("MENET4", MENET4, &ioc3_menet4_setup),
+	IOC3_SID("IO8", IO8, &ioc3_io8_setup)
 };
 #undef IOC3_SID
 
-- 
2.47.3