[PATCH v2 1/2] dt-bindings: input: add OnePlus pogo-pin keyboard

[wyibo6109]

From: Yibo Wang <wyibo6109@xxxxxxxxx>

Binding for the Tinno keyboard MCU used by the OnePlus Pad 3 Pro /
Pad 4 and OPPO Pad 5 Pro smart keyboards, attached to a tablet UART.
Describes the supply, TX-gate and wake GPIOs, with a MAINTAINERS entry.

The touchpad is described through the common touchscreen properties
(touchscreen-size-x/y, touchscreen-x-mm/y-mm): the MCU protocol has no
way to query the touchpad geometry and the same MCU is shipped in
keyboards with different touchpad matrices.

Signed-off-by: Yibo Wang <wyibo6109@xxxxxxxxx>
---
 .../bindings/input/oneplus,pogo-keyboard.yaml | 66 +++++++++++++++++++
 MAINTAINERS                                   |  6 ++
 2 files changed, 72 insertions(+)
 create mode 100644 Documentation/devicetree/bindings/input/oneplus,pogo-keyboard.yaml

diff --git a/Documentation/devicetree/bindings/input/oneplus,pogo-keyboard.yaml b/Documentation/devicetree/bindings/input/oneplus,pogo-keyboard.yaml
new file mode 100644
index 000000000..9055ececc
--- /dev/null
+++ b/Documentation/devicetree/bindings/input/oneplus,pogo-keyboard.yaml
@@ -0,0 +1,66 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+# Copyright (c) 2026 Yibo Wang <wyibo6109@xxxxxxxxx>
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/input/oneplus,pogo-keyboard.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: OnePlus / OPPO Pad pogo-pin smart keyboard
+
+maintainers:
+  - Yibo Wang <wyibo6109@xxxxxxxxx>
+
+description: |
+  The Tinno keyboard MCU used by the OnePlus Pad 3 Pro / Pad 4 and OPPO
+  Pad 5 Pro smart keyboards.  It is attached to a tablet UART and speaks
+  a framed half-duplex protocol over a shared single wire; host
+  transmission is gated onto the wire by a PMIC GPIO for the duration of
+  a frame.  The device provides a keyboard matrix, a touchpad and a
+  keyboard backlight.
+
+allOf:
+  - $ref: /schemas/serial/serial-peripheral-props.yaml#
+  - $ref: /schemas/input/touchscreen/touchscreen.yaml#
+
+properties:
+  compatible:
+    const: oneplus,pogo-keyboard
+
+  power-gpios:
+    description: GPIO enabling the keyboard supply, held high while attached.
+    maxItems: 1
+
+  tx-enable-gpios:
+    description: GPIO gating host TX onto the shared one-wire bus.
+    maxItems: 1
+
+  wake-gpios:
+    description: GPIO signalling attach/detach, also used as the wake line.
+    maxItems: 1
+
+  touchscreen-size-x: true
+  touchscreen-size-y: true
+  touchscreen-x-mm: true
+  touchscreen-y-mm: true
+
+required:
+  - compatible
+  - power-gpios
+  - tx-enable-gpios
+  - wake-gpios
+
+unevaluatedProperties: false
+
+examples:
+  - |
+    #include <dt-bindings/gpio/gpio.h>
+
+    keyboard {
+        compatible = "oneplus,pogo-keyboard";
+        power-gpios = <&pmic_gpios 12 GPIO_ACTIVE_HIGH>;
+        tx-enable-gpios = <&pmic2_gpios 6 GPIO_ACTIVE_HIGH>;
+        wake-gpios = <&tlmm 151 GPIO_ACTIVE_LOW>;
+        touchscreen-size-x = <2561>;
+        touchscreen-size-y = <1441>;
+    };
+...
diff --git a/MAINTAINERS b/MAINTAINERS
index 8014b9f82..9c29eb961 100644
--- a/MAINTAINERS
+++ b/MAINTAINERS
@@ -20156,6 +20156,12 @@ S:	Maintained
 F:	Documentation/ABI/testing/sysfs-bus-platform-onboard-usb-dev
 F:	drivers/usb/misc/onboard_usb_dev.c
 
+ONEPLUS POGO-PIN KEYBOARD DRIVER
+M:	Yibo Wang <wyibo6109@xxxxxxxxx>
+L:	linux-input@xxxxxxxxxxxxxxx
+S:	Maintained
+F:	Documentation/devicetree/bindings/input/oneplus,pogo-keyboard.yaml
+
 ONENAND FLASH DRIVER
 M:	Kyungmin Park <kyungmin.park@xxxxxxxxxxx>
 L:	linux-mtd@xxxxxxxxxxxxxxxxxxx
-- 
2.53.0