Re: [PATCH] wifi: brcmfmac: drop glom superframe on header parse failure

From: Arend van Spriel

Date: Thu Oct 08 2026 - 14:55:15 EST




On 08/10/2026 12:33, Shirong Zhao wrote:
brcmf_sdio_rxglom() uses rd_new.len_nxtfrm and rd_new.dat_offset
right after the superframe brcmf_sdio_hdparse() without checking
errcode. On parse failure those fields are either uninitialized
(the early -ENODATA/-EIO/-EPROTO returns) or hold a rejected value
(the -ENXIO bad-offset return), so bus->cur_read.len gets garbage
and skb_pull() runs with a garbage length.

Check errcode first and drop the superframe with the same cleanup
used for a bad subframe below.

Verified against wireless.git main (9727d1c4e1c9), the current
wireless fixes tree.

Thanks for the patch.
Signed-off-by: Shirong Zhao <shxzhaosr@xxxxxxx>
---
drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c | 12 ++++++++++++
1 file changed, 12 insertions(+)

diff --git a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
index 381801af3..53ffb8dba 100644
--- a/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
+++ b/drivers/net/wireless/broadcom/brcm80211/brcmfmac/sdio.c
@@ -1649,6 +1649,18 @@ static u8 brcmf_sdio_rxglom(struct brcmf_sdio *bus, u8 rxseq)
errcode = brcmf_sdio_hdparse(bus, pfirst->data, &rd_new,
BRCMF_SDIO_FT_SUPER);

I would avoid the extra release/claim host below. I modified your change to what I think it should be:

+ if (errcode) {
+ /* Superframe header is bad; rd_new fields are not
+ * valid here. Drop it like a bad subframe below.
+ */
+ brcmf_sdio_rxfail(bus, true, false);
+ bus->sdcnt.rxglomfail++;
+ brcmf_sdio_free_glom(bus);
+ sdio_release_host(bus->sdiodev->func1);
+ bus->cur_read.len = 0;
+ return 0;
+ }
sdio_release_host(bus->sdiodev->func1);
bus->cur_read.len = rd_new.len_nxtfrm << 4;
/* Remove superframe header, remember offset */

Regards,
Arend