Re: [PATCH PRELIMINARY 3/5] arm64: dts: qcom: shikra-cqm-evk: enable the first Ethernet port

[Konrad Dybcio]

On 9/8/26 8:23 AM, Mohd Ayaan Anwar wrote:
> Enable ethernet0 for the Shikra CQM EVK board with its DP83867 RGMII
> PHY. The PHY is powered on using a GPIO-controlled 2.5V regulator.
> 
> Signed-off-by: Mohd Ayaan Anwar <mohd.anwar@xxxxxxxxxxxxxxxx>
> ---


[...]

> +&tlmm {
> +	rgmii_phy_pwr_default: rgmii-phy-pwr-default-state {
> +		pins = "gpio149";
> +		function = "gpio";
> +		drive-strength = <2>;
> +		bias-disable;
> +		output-low;

You shouldn't need that - the driver will take care of the 
GPIO

otherwise

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad