[PATCH ath-next 11/16] wifi: ath11k: add hw params for QCN6122
From: George Moussalem via B4 Relay
Date: Wed Sep 23 2026 - 08:17:05 EST
From: George Moussalem <george.moussalem@xxxxxxxxxxx>
Add QCN6122 platform support.
QCN6122 is a PCIe based solution that is attached to and enumerated
by the WPSS (Wireless Processor SubSystem) Q6 processor.
Though it is a PCIe device, since it is not attached to APSS processor,
APSS will be unaware of such a decice and hence it is registered to the
APSS processor as a platform AHB device.
As such, QCN6122 is a hybrid bus type device and follows the same
codepath as for WCN6750.
This is a heavily simplified version of below downstream patch:
Link: https://git.codelinaro.org/clo/qsdk/oss/system/feeds/wlan-open/-/blob/NHSS.QSDK.12.4.5.r2/mac80211/patches/232-ath11k-qcn6122-support.patch
Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
---
drivers/net/wireless/ath/ath11k/core.c | 85 ++++++++++++++++++++++++++++++++++
drivers/net/wireless/ath/ath11k/core.h | 1 +
drivers/net/wireless/ath/ath11k/qmi.h | 3 +-
3 files changed, 88 insertions(+), 1 deletion(-)
diff --git a/drivers/net/wireless/ath/ath11k/core.c b/drivers/net/wireless/ath/ath11k/core.c
index 428f382e74a9..0a38db1ee175 100644
--- a/drivers/net/wireless/ath/ath11k/core.c
+++ b/drivers/net/wireless/ath/ath11k/core.c
@@ -936,6 +936,91 @@ static const struct ath11k_hw_params ath11k_hw_params[] = {
.cfr_num_stream_bufs = 255,
.cfr_stream_buf_size = 8200,
},
+ {
+ .hw_rev = ATH11K_HW_QCN6122_HW10,
+ .name = "qcn6122 hw1.0",
+ .fw = {
+ .dir = "QCN6122/hw1.0",
+ .board_size = 256 * 1024,
+ .cal_offset = 128 * 1024,
+ .m3_loader = ath11k_m3_fw_loader_ahb,
+ },
+ .max_radios = MAX_RADIOS_5018,
+ .bdf_addr = 0x4D200000,
+ .hw_ops = &ipq5018_ops,
+ .internal_sleep_clock = false,
+ .qmi_service_ins_id = ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCN6122,
+ .host_ce_config = ath11k_host_ce_config_qcn9074,
+ .ce_count = CE_CNT_5018,
+ .target_ce_config = ath11k_target_ce_config_wlan_ipq5018,
+ .target_ce_count = TARGET_CE_CNT_5018,
+ .svc_to_ce_map = ath11k_target_service_to_ce_map_wlan_ipq5018,
+ .svc_to_ce_map_len = SVC_CE_MAP_LEN_5018,
+ .single_pdev_only = false,
+ .rxdma1_enable = true,
+ .num_rxdma_per_pdev = RXDMA_PER_PDEV_5018,
+ .rx_mac_buf_ring = false,
+ .vdev_start_delay = false,
+ .htt_peer_map_v2 = true,
+
+ .spectral = {
+ .fft_sz = 2,
+ .fft_pad_sz = 0,
+ .summary_pad_sz = 16,
+ .fft_hdr_len = 24,
+ .max_fft_bins = 1024,
+ .fragment_160mhz = false,
+ },
+
+ .interface_modes = BIT(NL80211_IFTYPE_STATION) |
+ BIT(NL80211_IFTYPE_AP) |
+ BIT(NL80211_IFTYPE_MESH_POINT),
+ .supports_monitor = true,
+ .full_monitor_mode = false,
+ .supports_shadow_regs = false,
+ .idle_ps = false,
+ .supports_sta_ps = false,
+ .coldboot_cal_mm = false,
+ .coldboot_cal_ftm = false,
+ .cbcal_restart_fw = true,
+ .fw_mem_mode = 1,
+ .num_vdevs = 16 + 1,
+ .num_peers = 512,
+ .supports_suspend = false,
+ .hal_desc_sz = sizeof(struct hal_rx_desc_qcn9074),
+ .supports_regdb = false,
+ .fix_l1ss = true,
+ .credit_flow = false,
+ .hal_params = &ath11k_hw_hal_params_ipq5018,
+ .supports_dynamic_smps_6ghz = false,
+ .alloc_cacheable_memory = false,
+ .supports_rssi_stats = false,
+ .fw_wmi_diag_event = false,
+ .current_cc_support = false,
+ .dbr_debug_support = true,
+ .global_reset = false,
+ .bios_sar_capa = NULL,
+ .m3_fw_support = true,
+ .fixed_bdf_addr = true,
+ .fixed_mem_region = true,
+ .static_window_map = true,
+ .hybrid_bus_type = true,
+ .fixed_fw_mem = false,
+ .support_off_channel_tx = false,
+ .supports_multi_bssid = false,
+
+ .sram_dump = {},
+
+ .tcl_ring_retry = true,
+ .tx_ring_size = DP_TCL_DATA_RING_SIZE,
+ .smp2p_wow_exit = false,
+ .support_fw_mac_sequence = false,
+ .support_dual_stations = false,
+ .pdev_suspend = false,
+ .cfr_support = false,
+ .cfr_num_stream_bufs = 0,
+ .cfr_stream_buf_size = 0,
+ },
};
static const struct dmi_system_id ath11k_pm_quirk_table[] = {
diff --git a/drivers/net/wireless/ath/ath11k/core.h b/drivers/net/wireless/ath/ath11k/core.h
index a0d725923ef2..e92ec95dd384 100644
--- a/drivers/net/wireless/ath/ath11k/core.h
+++ b/drivers/net/wireless/ath/ath11k/core.h
@@ -153,6 +153,7 @@ enum ath11k_hw_rev {
ATH11K_HW_IPQ5018_HW10,
ATH11K_HW_QCA2066_HW21,
ATH11K_HW_QCA6698AQ_HW21,
+ ATH11K_HW_QCN6122_HW10,
};
enum ath11k_firmware_mode {
diff --git a/drivers/net/wireless/ath/ath11k/qmi.h b/drivers/net/wireless/ath/ath11k/qmi.h
index 350816c81ee5..f5442a04f079 100644
--- a/drivers/net/wireless/ath/ath11k/qmi.h
+++ b/drivers/net/wireless/ath/ath11k/qmi.h
@@ -21,10 +21,11 @@
#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_IPQ8074 0x02
#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCN9074 0x07
#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_WCN6750 0x03
+#define ATH11K_QMI_WLFW_SERVICE_INS_ID_V01_QCN6122 0x40
#define ATH11K_QMI_WLANFW_MAX_TIMESTAMP_LEN_V01 32
#define ATH11K_QMI_RESP_LEN_MAX 8192
#define ATH11K_QMI_WLANFW_MAX_NUM_MEM_SEG_V01 52
-#define ATH11K_QMI_CALDB_SIZE 0x480000
+#define ATH11K_QMI_CALDB_SIZE 0x500000
#define ATH11K_QMI_BDF_EXT_STR_LENGTH 0x20
#define ATH11K_QMI_FW_MEM_REQ_SEGMENT_CNT 5
--
2.53.0