Re: [PATCH 3/4] ASoC: dt-bindings: Add Cadence I2S-MC controller

[Rob Herring (Arm)]

On Tue, 22 Sep 2026 19:21:33 +0800, joakim.zhang@xxxxxxxxxxx wrote:
> From: Joakim Zhang <joakim.zhang@xxxxxxxxxxx>
> 
> Add the DT binding for the Cadence I2S-MC multi-channel controller
> integrated in the CIX SKY1 audio subsystem. The controller exposes a
> transmit DAI and a receive DAI and moves audio through a configurable
> set of its 8 data pins. Which pins are wired out and in which
> direction is fixed by the board design and described by the
> cix,pin-out-num, cix,pin-rx-mask and cix,pin-tx-mask properties.
> 
> Signed-off-by: Joakim Zhang <joakim.zhang@xxxxxxxxxxx>
> ---
>  .../bindings/sound/cix,sky1-i2s-mc.yaml       | 124 ++++++++++++++++++
>  1 file changed, 124 insertions(+)
>  create mode 100644 Documentation/devicetree/bindings/sound/cix,sky1-i2s-mc.yaml
> 

My bot found errors running 'make dt_binding_check' on your patch:

yamllint warnings/errors:

dtschema/dtc warnings/errors:
Documentation/devicetree/bindings/sound/cix,sky1-i2s-sc.example.dtb: /example-0/dma-controller: failed to match any schema with compatible: ['cix,sky1-audss-dmac']
Documentation/devicetree/bindings/sound/cix,sky1-i2s-mc.example.dtb: /example-0/dma-controller: failed to match any schema with compatible: ['cix,sky1-audss-dmac']

doc reference errors (make refcheckdocs):

See https://patchwork.kernel.org/project/devicetree/patch/20260922112134.4167305-4-joakim.zhang@xxxxxxxxxxx

The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.

If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:

pip3 install dtschema --upgrade

Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.