Re: [PATCH v2 0/3] arm64: dts: qcom: nord: Add display support

[Bartosz Golaszewski]

On Sun, 20 Sep 2026 11:19:27 +0200, Shawn Guo
<shengchao.guo@xxxxxxxxxxxxxxxx> said:
> This series adds the display and remaining clock controller nodes for
> the Nord SoC, and enables the eDP outputs on the Ride Embedded (eDP0-3)
> and RRD (eDP0/1) boards.
>
> Dependencies:
> - Display and PHY: https://lore.kernel.org/all/20260911-nord-drv-dt-v1-0-e25c073cf1b6@xxxxxxxxxxxxxxxx/
> - Clock DTS: https://lore.kernel.org/all/20260920081049.2183845-1-shengchao.guo@xxxxxxxxxxxxxxxx/
> - Ride Embedded DTS: https://lore.kernel.org/all/20260920084920.2201418-1-shengchao.guo@xxxxxxxxxxxxxxxx/
>
> Changes for v2:
> - Rename label mdss to mdss0
> - Drop clock controller DTS change from the series
>
> Ritesh Kumar (3):
>   arm64: dts: qcom: nord: Add display subsystem nodes
>   arm64: dts: qcom: nord-ride-embedded: Enable eDP0-3 display output
>   arm64: dts: qcom: nord-rrd: Enable eDP0/1 display output
>
>  arch/arm64/boot/dts/qcom/nord-embedded.dtsi   | 523 +++++++++++++++++-
>  .../boot/dts/qcom/nord-ride-embedded.dts      | 128 +++++
>  arch/arm64/boot/dts/qcom/nord-rrd.dts         |  62 +++
>  arch/arm64/boot/dts/qcom/nord.dtsi            | 266 +++++++++
>  4 files changed, 971 insertions(+), 8 deletions(-)
>
> --
> 2.43.0
>
>

Tested-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxxxxxxxx>