[PATCH v2 0/3] arm64: dts: qcom: nord: Add display support

[Shawn Guo]

This series adds the display and remaining clock controller nodes for
the Nord SoC, and enables the eDP outputs on the Ride Embedded (eDP0-3)
and RRD (eDP0/1) boards.

Dependencies:
- Display and PHY: https://lore.kernel.org/all/20260911-nord-drv-dt-v1-0-e25c073cf1b6@xxxxxxxxxxxxxxxx/
- Clock DTS: https://lore.kernel.org/all/20260920081049.2183845-1-shengchao.guo@xxxxxxxxxxxxxxxx/
- Ride Embedded DTS: https://lore.kernel.org/all/20260920084920.2201418-1-shengchao.guo@xxxxxxxxxxxxxxxx/

Changes for v2:
- Rename label mdss to mdss0
- Drop clock controller DTS change from the series

Ritesh Kumar (3):
  arm64: dts: qcom: nord: Add display subsystem nodes
  arm64: dts: qcom: nord-ride-embedded: Enable eDP0-3 display output
  arm64: dts: qcom: nord-rrd: Enable eDP0/1 display output

 arch/arm64/boot/dts/qcom/nord-embedded.dtsi   | 523 +++++++++++++++++-
 .../boot/dts/qcom/nord-ride-embedded.dts      | 128 +++++
 arch/arm64/boot/dts/qcom/nord-rrd.dts         |  62 +++
 arch/arm64/boot/dts/qcom/nord.dtsi            | 266 +++++++++
 4 files changed, 971 insertions(+), 8 deletions(-)

-- 
2.43.0