Re: [PATCH] dt-bindings: power: supply: battery: allow longer ocv-capacity tables

[Henrik Grimler]

Hi Ryan,

On Fri, Sep 18, 2026 at 12:36:31AM -0500, Ryan Brue wrote:
> ocv-capacity-table-N has been capped at 100 points since battery.txt was
> converted to YAML, where the limit arrived without a stated reason.
> 
> The MT6397 fuel gauge is characterised per temperature by a table the
> Amazon Fire HD 10 (2017) vendor device tree carries with 126 points, of
> which 122 are expressible here - the remainder are greater than 100%
> discharged, so the binding excludes those points. Boards carrying this
> PMIC fuel gauge would need more than 100 points to describe the pack with
> the generic property. Raise the cap to 128.
> 
> Assisted-by: LLM
> Signed-off-by: Ryan Brue <ryanbrue.dev@xxxxxxxxx>
> ---
> No kernel change goes with this. power_supply_get_battery_info() sizes each
> ocv-capacity-table-N from the property itself -- it reads the length with
> fwnode_property_count_u32() and devm_kcalloc()s that many entries -- so
> maxItems in the binding is the only cap on points per table.
> POWER_SUPPLY_OCV_TEMP_MAX bounds the number of tables, not their length.
> 
> The consumer that wants this is an MT6397 PMIC fuel gauge not yet posted;
> its pack is characterised at 126 points per temperature in the vendor's
> kernel (Amazon Fire OS, based on Linux 3.18), with 122 of those points
> being expressible with the generic property (the rest are greater than
> 100%).

Allowing for points > 100 % could make sense, but why would you need
122 points up to 100 %? If the vendor kernel has several values at for
example 20 %, then a better solution is probably to take the average
of them.

I think only reason to have multiple values for the same percentage
would be if hysterersis (see for example this open-access article [1]
for discussion about hysteresis) is taken into account, i.e. having
one table for charge direction, and one table for discharge direction,
but I don't think any driver uses multiple tables to handle something
like that.

[1] https://doi.org/10.1038/s41598-019-51474-5

Best regards,
Henrik Grimler

> ---
>  Documentation/devicetree/bindings/power/supply/battery.yaml | 2 +-
>  1 file changed, 1 insertion(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/power/supply/battery.yaml b/Documentation/devicetree/bindings/power/supply/battery.yaml
> index 8ebf05d9497c..a6d4822f591c 100644
> --- a/Documentation/devicetree/bindings/power/supply/battery.yaml
> +++ b/Documentation/devicetree/bindings/power/supply/battery.yaml
> @@ -154,7 +154,7 @@ patternProperties:
>        of the battery and corresponding battery capacity percent, which is used
>        to look up battery capacity according to current OCV value. And the open
>        circuit voltage unit is microvolt.
> -    maxItems: 100
> +    maxItems: 128
>      items:
>        items:
>          - description: open circuit voltage (OCV) in microvolts
> 
> ---
> base-commit: fd73f4a6659897191fa0d40695fe370925dd3780
> change-id: 20260917-rbrue-suez-upstreaming-battery-ocv-table-128-9ba83f9313bb
> 
> Best regards,
> --  
> Ryan Brue <ryanbrue.dev@xxxxxxxxx>
>