Re: [PATCH net v3 0/2] net: phy: qca808x: fix the active-high LED polarity mode

[patchwork-bot+netdevbpf]

Hello:

This series was applied to netdev/net-next.git (main)
by Jakub Kicinski <kuba@xxxxxxxxxx>:

On Wed, 16 Sep 2026 07:31:36 +0900 you wrote:
> A QCA8081 with an 'active-high' LED node does not work today, in two
> separate ways, so this is now two patches: qca808x_led_polarity_set()
> rejects the mode outright, and once it stops doing that
> qca808x_config_init() still will not put the bit back after the reset
> phy_init_hw() runs.
> 
> Tested in QEMU against a synthetic MDIO bus that answers as a QCA8081 and
> emulates MMD7 0x901a, with the reset clearing BIT(6) as f203c8c77c76
> describes. One kernel, one harness, three arms, x86_64, 7.3.0-rc2+:
> 
> [...]

Here is the summary with links:
  - [net,v3,1/2] net: phy: qca808x: accept the active-high LED polarity mode
    https://git.kernel.org/netdev/net-next/c/5117ce8c35d1
  - [net,v3,2/2] net: phy: qca808x: keep an explicit active-high LED across the reset
    https://git.kernel.org/netdev/net-next/c/f1b4766d67bb

You are awesome, thank you!
-- 
Deet-doot-dot, I am a bot.
https://korg.docs.kernel.org/patchwork/pwbot.html