Re: [PATCH v2 13/15] arm64: dts: qcom: msm8996: Move PCIe phy and GPIOs to root port node

[Abel Vesa]

On 26-09-17 17:55:27, Krishna Chaitanya Chundru wrote:
> The PCIe phy reference and the perst/wake GPIO properties are
> per root port and belong in the root port node (pcie@0), not in the
> RC controller node. Move phys and phy-names from the controller to
> pcie0_port0, pcie1_port0, and pcie2_port0, adding labels to these
> nodes to allow board-level overrides. Move perst-gpios/wake-gpios
> from the controller overrides to the respective port nodes in the
> board files, renaming perst-gpios to reset-gpios to match the binding
> used in the root port context.
> 
> Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>

Reviewed-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>