[PATCH v4 0/3] Add support for NetCube Systems OpenNMC (dobermann)

[Lukas Schmid]

This series adds support for the NetCube Systems OpenNMC.

Sorry for the quick resend. This v4 includes the corrected Makefile
target name.

Changes in v4:
 - fix the ARM Makefile target name for the new board

Changes in v3:
 - actually add the Makefile changes

Changes in v2:
 - fixed ordering of compatible enum
 - fixed gpio line names

Signed-off-by: Lukas Schmid <lukas.schmid@xxxxxxxxxx>
---
Lukas Schmid (3):
  dt-bindings: arm: sunxi: Add NetCube Systems OpenNMC (dobermann)
  riscv: dts: allwinner: d1s-t113: Add uart4 pinctrl required by NetCube
    Systems OpenNMC
  ARM: dts: sunxi: add support for NetCube Systems OpenNMC (dobermann)

 .../devicetree/bindings/arm/sunxi.yaml        |   1 +
 arch/arm/boot/dts/allwinner/Makefile          |   2 +
 .../sun8i-t113s-netcube-dobermann.dts         | 149 ++++++++++++++++++
 .../boot/dts/allwinner/sunxi-d1s-t113.dtsi    |   6 +
 4 files changed, 158 insertions(+)
 create mode 100644 arch/arm/boot/dts/allwinner/sun8i-t113s-netcube-dobermann.dts

-- 
2.47.3