[PATCH v3 1/4] dt-bindings: net: ethernet-phy: increase max clock count to two

[George Moussalem via B4 Relay]

From: George Moussalem <george.moussalem@xxxxxxxxxxx>

The clocks property has a restriction to maximum one.
Yet, some PHYs may require more than 1 clock such as the IPQ5018 PHY
which requires two clocks for RX and TX. As such, increase maxItems to
two.

Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>
---
Commit 350b7a258f20 introduced the clocks property with a restriction to
maximum 1 to the main ethernet-phy.yaml binding for Realtek to add an
optional external clock source. This is restrictive to all PHY bindings,
as some PHYs may require more than 1 clock such as the IPQ5018 PHY which
requires 2 clocks (for RX and TX).
---
 Documentation/devicetree/bindings/net/ethernet-phy.yaml | 9 ++++++---
 1 file changed, 6 insertions(+), 3 deletions(-)

diff --git a/Documentation/devicetree/bindings/net/ethernet-phy.yaml b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
index 21a1a63506f0..c3ebb3af8b52 100644
--- a/Documentation/devicetree/bindings/net/ethernet-phy.yaml
+++ b/Documentation/devicetree/bindings/net/ethernet-phy.yaml
@@ -106,10 +106,13 @@ properties:
       by software.
 
   clocks:
-    maxItems: 1
+    minItems: 1
+    maxItems: 2
     description:
-      External clock connected to the PHY. If not specified it is assumed
-      that the PHY uses a fixed crystal or an internal oscillator.
+      External clock connected to the PHY or RX and TX clocks that the PHY
+      requires to enable explicitly. If not specified it is assumed
+      that the PHY uses a fixed crystal or an internal oscillator or that the
+      RX/TX clocks are hardware enabled by default.
 
   enet-phy-lane-swap:
     $ref: /schemas/types.yaml#/definitions/flag

-- 
2.53.0