Re: (subset) [PATCH] leds: tps6131x: increase overvoltage protection threshold to 6V

[Lee Jones]

On Wed, 27 May 2026 12:26:51 +0200, Matthias Fend wrote:
> Currently, there may be cases where the overvoltage detection is triggered
> even with a valid and generally functioning hardware setup. This occurs,
> for example, when the input voltage exceeds the currently used overvoltage
> threshold of 4.65V (typical). Since input voltages up to 5V are supported,
> the threshold should be adjusted accordingly.
> 
> While the target output voltage setting has no effect on the LED operation
> used here, it indirectly selects the threshold for overvoltage detection.
> Set this to a value of 4.95V to select a threshold of 6V (typical).
> 
> [...]

Applied, thanks!

[1/1] leds: tps6131x: increase overvoltage protection threshold to 6V
      commit: cf9d871f6a13a8c6dc63bb73842c50ed95a127d9

--
Lee Jones [李琼斯]