Re: [PATCH next-next] net: dsa: qca8k: Add support for force mode for fixed link topology

[Andrew Lunn]

On Wed, Jun 03, 2026 at 11:57:39AM +0400, George Moussalem via B4 Relay wrote:
> From: George Moussalem <george.moussalem@xxxxxxxxxxx>
> 
> A fixed link topology is commonly used to connect this switch (on port
> 0 or 6) to a SoC's MAC over SGMII. When inband negotiation is not used,
> the switch needs to be configured to operate in force mode. As such,
> enable support for force mode.
> 
> Signed-off-by: George Moussalem <george.moussalem@xxxxxxxxxxx>

Reviewed-by: Andrew Lunn <andrew@xxxxxxx>

    Andrew