Re: [PATCH v4] arm64: dts: qcom: monaco-arduino-monza: Add QCNFA725B WiFi support

[Dmitry Baryshkov]

On Mon, Jun 01, 2026 at 07:46:49PM +0800, Qian Zhang wrote:
> On Sun, May 31, 2026 at 5:09 PM Dmitry Baryshkov
> <dmitry.baryshkov@xxxxxxxxxxxxxxxx> wrote:
> >
> > On Sun, May 31, 2026 at 12:44:09PM +0530, Qian Zhang wrote:

> > > +
> > > +     wcn6855-pmu {
> > > +             compatible = "qcom,wcn6855-pmu";
> > > +
> > > +             pinctrl-names = "default";
> > > +             pinctrl-0 = <&wlan_en_state>;
> > > +
> > > +             wlan-enable-gpios = <&tlmm 56 GPIO_ACTIVE_HIGH>;
> >
> > No bt-enable-gpios?
> BT is enabled in node uart10
> https://lore.kernel.org/all/20260429103537.1282497-1-shuai.zhang@xxxxxxxxxxxxxxxx/

The BT is powered on by this PMU. So, if you are adding PMU, it should
be used by the BT node too.

> >
> > > +
> > > +             vddio-supply    = <&vdc_3v3>;
> >

-- 
With best wishes
Dmitry