Re: [PATCH v3 05/10] ARM: dts: qcom: msm8960: add RPM clock controller and fix USB clocks

[Dmitry Baryshkov]

On Mon, Jun 01, 2026 at 03:51:18PM +0700, Antony Kurniawan Soemardi via B4 Relay wrote:
> From: Antony Kurniawan Soemardi <linux@xxxxxxxxxxxxxx>
> 
> The RPM clock controller manages clocks shared between the application
> processor and the RPM firmware, including fabric and bus clocks required
> by several peripherals.
> 
> With the RPM clock controller now available in the device tree, the USB
> controller must explicitly declare its dependency on
> RPM_DAYTONA_FABRIC_CLK. Without this declaration, the clock framework
> would consider it unused and disable it, breaking USB functionality.
> 
> This also corrects the previous misuse of USB_HS1_XCVR_CLK as the core
> clock. The XCVR clock is in fact used for PHY/reset handling rather than
> as the main core clock.
> 
> A similar issue has been observed on APQ8064, where missing the RPM
> fabric clock dependency leads to broken USB.
> 
> Signed-off-by: Antony Kurniawan Soemardi <linux@xxxxxxxxxxxxxx>
> ---
>  arch/arm/boot/dts/qcom/qcom-msm8960.dtsi | 20 ++++++++++++++++++--
>  1 file changed, 18 insertions(+), 2 deletions(-)
> 

Please make sure that the DT matches the USB controller schema.
Otherwise:

Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@xxxxxxxxxxxxxxxx>


-- 
With best wishes
Dmitry