Re: [PATCH 1/4] dt-bindings: bluetooth: qcom,qcc2072-bt: add bindings for QCC2072
From: Dmitry Baryshkov
Date: Mon Jun 01 2026 - 03:53:04 EST
On Mon, Jun 01, 2026 at 12:50:00PM +0530, Yepuri Siddu wrote:
>
>
> On 5/30/2026 6:04 PM, Krzysztof Kozlowski wrote:
> > On Fri, May 29, 2026 at 11:23:42PM +0530, Yepuri Siddu wrote:
> > > Document the YAML binding schema for the Qualcomm QCC2072 UART-based
> > > Bluetooth controller.
> >
> > Where is the rest?
> >
> > Also:
> > A nit, subject: drop second/last, redundant "bindings for". The
> > "dt-bindings" prefix is already stating that these are bindings.
> > See also:
> > https://elixir.bootlin.com/linux/v6.17-rc3/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
> >
> Thanks, I will update this accordingly and send a v2 with the fixes.
> > >
> > > Unlike other Qualcomm Bluetooth chips, QCC2072 requires no external
> > > voltage regulators. The schema inherits common Qualcomm Bluetooth
> > > properties via qcom,bluetooth-common.yaml and serial peripheral
> > > interface properties for the UART link.
> > >
> > > Signed-off-by: Yepuri Siddu <yepuri.siddu@xxxxxxxxxxxxxxxx>
> > > ---
> > > .../net/bluetooth/qcom,qcc2072-bt.yaml | 38 +++++++++++++++++++
> > > 1 file changed, 38 insertions(+)
> > > create mode 100644 Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml
> > >
> > > diff --git a/Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml b/Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml
> > > new file mode 100644
> > > index 000000000000..8e2f15a75d62
> > > --- /dev/null
> > > +++ b/Documentation/devicetree/bindings/net/bluetooth/qcom,qcc2072-bt.yaml
> > > @@ -0,0 +1,38 @@
> > > +# SPDX-License-Identifier: (GPL-2.0 OR BSD-2-Clause)
> > > +%YAML 1.2
> > > +---
> > > +$id: http://devicetree.org/schemas/net/bluetooth/qcom,qcc2072-bt.yaml#
> > > +$schema: http://devicetree.org/meta-schemas/core.yaml#
> > > +
> > > +title: Qualcomm QCC2072 Bluetooth
> > > +
> > > +maintainers:
> > > + - Balakrishna Godavarthi <quic_bgodavar@xxxxxxxxxxx>
> > > + - Rocky Liao <quic_rjliao@xxxxxxxxxxx>
> > > +
> > > +description:
> > > + Qualcomm QCC2072 is a UART-based Bluetooth controller.
> > > +
> > > +properties:
> > > + compatible:
> > > + enum:
> > > + - qcom,qcc2072-bt
> > > +
> > > +required:
> > > + - compatible
> > > +
> >
> > Looks heavily incomplete. Devices do not work without power for example.
>
> The module receives power through the M.2 edge connector and manages its
> own power sequencing internally. Unlike bare Qualcomm Bluetooth SoCs, it
> requires no external voltage regulators, enable GPIOs, or clock supply
> from the host, so no power-related properties are needed in the binding.
If this is a purely M.2 device, then it should not be a part of DT.
--
With best wishes
Dmitry