Re: [PATCH 1/4] iio: light: pa12203001: use devm_pm_runtime_enable() to fix probe error path

[Jonathan Cameron]

On Fri, 29 May 2026 15:45:41 +0500
Stepan Ionichev <sozdayvek@xxxxxxxxx> wrote:

> pa12203001_probe() calls pm_runtime_enable() and then
> iio_device_register().  If iio_device_register() fails the function
> jumps to out_err but the existing out_err handler does not call
> pm_runtime_disable(), leaking the runtime PM enable_count on probe
> failure and on subsequent rebind.
> 
> Switch to devm_pm_runtime_enable() so the enable (and the matching
> dont_use_autosuspend) are torn down automatically.  On its new error path
> the probe jumps to the existing out_err label so the chip-disable cleanup
> stays in step with the rest of the manual unwind.  The pm_runtime_disable()
> and pm_runtime_set_suspended() calls in pa12203001_remove() are dropped;
> the devm action runs after .remove() and handles the teardown.
> 
> Signed-off-by: Stepan Ionichev <sozdayvek@xxxxxxxxx>
> ---
>  drivers/iio/light/pa12203001.c | 7 +++----
>  1 file changed, 3 insertions(+), 4 deletions(-)
> 
> diff --git a/drivers/iio/light/pa12203001.c b/drivers/iio/light/pa12203001.c
> index 98a1f1624c75..b9f50c9070a3 100644
> --- a/drivers/iio/light/pa12203001.c
> +++ b/drivers/iio/light/pa12203001.c
> @@ -372,7 +372,9 @@ static int pa12203001_probe(struct i2c_client *client)
>  	if (ret < 0)
>  		goto out_err;
>  
> -	pm_runtime_enable(&client->dev);
> +	ret = devm_pm_runtime_enable(&client->dev);
> +	if (ret)
> +		goto out_err;

A goto after a devm call is a big warning flag.

A quick look suggests easy enough to solve with a devm_add_action_or_reset();
Probably needs to be a precursor patch to this one.



>  	pm_runtime_set_autosuspend_delay(&client->dev,
>  					 PA12203001_SLEEP_DELAY_MS);
>  	pm_runtime_use_autosuspend(&client->dev);
> @@ -395,9 +397,6 @@ static void pa12203001_remove(struct i2c_client *client)
>  
>  	iio_device_unregister(indio_dev);
>  
> -	pm_runtime_disable(&client->dev);
> -	pm_runtime_set_suspended(&client->dev);
> -
>  	ret = pa12203001_power_chip(indio_dev, PA12203001_CHIP_DISABLE);
>  	if (ret)
>  		dev_warn(&client->dev, "Failed to power down (%pe)\n",