[PATCH 7/8] arm64: dts: qcom: shikra-cqm-evk-imx577-camera: Add DT overlay

[Nihal Kumar Gupta]

Shikra CQM and CQS are retail variants sharing the same PM4125 PMIC
and identical camera supply rails. The only difference between them
is the integrated modem on CQM, which does not affect camera hardware.

Add a shared overlay for optional IMX577 integration via CSIPHY1,
used by both CQM and CQS EVK boards.

Signed-off-by: Nihal Kumar Gupta <nihal.gupta@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/Makefile                  |  6 +++
 .../dts/qcom/shikra-cqm-evk-imx577-camera.dtso     | 63 ++++++++++++++++++++++
 2 files changed, 69 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
index a9e9d829fb962386b3975f345ec006504607130a..df41830e18edff82893ca24ca84d7e03065d0ef7 100644
--- a/arch/arm64/boot/dts/qcom/Makefile
+++ b/arch/arm64/boot/dts/qcom/Makefile
@@ -337,6 +337,12 @@ dtb-$(CONFIG_ARCH_QCOM)	+= sdx75-idp.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqm-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqs-evk.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= shikra-iqs-evk.dtb
+
+shikra-cqm-evk-imx577-camera-dtbs	:= shikra-cqm-evk.dtb shikra-cqm-evk-imx577-camera.dtbo
+shikra-cqs-evk-imx577-camera-dtbs	:= shikra-cqs-evk.dtb shikra-cqm-evk-imx577-camera.dtbo
+
+dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqm-evk-imx577-camera.dtb
+dtb-$(CONFIG_ARCH_QCOM)	+= shikra-cqs-evk-imx577-camera.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm4250-oneplus-billie2.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm4450-qrd.dtb
 dtb-$(CONFIG_ARCH_QCOM)	+= sm6115-fxtec-pro1x.dtb
diff --git a/arch/arm64/boot/dts/qcom/shikra-cqm-evk-imx577-camera.dtso b/arch/arm64/boot/dts/qcom/shikra-cqm-evk-imx577-camera.dtso
new file mode 100644
index 0000000000000000000000000000000000000000..aedcd164810cf687efb425da79ace7ec6453e3a5
--- /dev/null
+++ b/arch/arm64/boot/dts/qcom/shikra-cqm-evk-imx577-camera.dtso
@@ -0,0 +1,63 @@
+// SPDX-License-Identifier: BSD-3-Clause
+/*
+ * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
+ */
+
+/dts-v1/;
+/plugin/;
+
+#include <dt-bindings/clock/qcom,shikra-gcc.h>
+#include <dt-bindings/gpio/gpio.h>
+
+&camss {
+	vdd-csiphy-1p2-supply = <&pm4125_l5>;
+	vdd-csiphy-1p8-supply = <&pm4125_l13>;
+
+	status = "okay";
+
+	ports {
+		#address-cells = <1>;
+		#size-cells = <0>;
+
+		port@1 {
+			reg = <1>;
+
+			csiphy1_ep: endpoint {
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&imx577_ep1>;
+			};
+		};
+	};
+};
+
+&cci {
+	status = "okay";
+};
+
+&cci_i2c1 {
+	#address-cells = <1>;
+	#size-cells = <0>;
+
+	camera@1a {
+		compatible = "sony,imx577";
+		reg = <0x1a>;
+
+		reset-gpios = <&tlmm 33 GPIO_ACTIVE_LOW>;
+		pinctrl-0 = <&mclk1_default>;
+		pinctrl-names = "default";
+
+		clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		assigned-clocks = <&gcc GCC_CAMSS_MCLK1_CLK>;
+		assigned-clock-rates = <24000000>;
+
+		dovdd-supply = <&pm4125_l15>;
+
+		port {
+			imx577_ep1: endpoint {
+				link-frequencies = /bits/ 64 <600000000>;
+				data-lanes = <0 1 2 3>;
+				remote-endpoint = <&csiphy1_ep>;
+			};
+		};
+	};
+};

-- 
2.34.1