[PATCH v2 08/12] dmaengine: dw-edma-pcie: Add platform ops to match data

[Koichiro Den]

Move the platform ops pointer into match data. Existing EDDA/MDB matches
keep using dw_edma_pcie_plat_ops.

No functional changes intended.

Suggested-by: Frank Li <Frank.Li@xxxxxxx>
Signed-off-by: Koichiro Den <den@xxxxxxxxxxxxx>
---
Changes in v2:
  - New patch. The original commit
    "dmaengine: dw-edma-pcie: Add raw slave address ops" is dropped
    per Frank's suggestion. DW_EDMA_PCIE_F_RAW_SLAVE_ADDR is no
    longer needed.

 drivers/dma/dw-edma/dw-edma-pcie.c | 7 +++++--
 1 file changed, 5 insertions(+), 2 deletions(-)

diff --git a/drivers/dma/dw-edma/dw-edma-pcie.c b/drivers/dma/dw-edma/dw-edma-pcie.c
index 9aed1005854d..1d63b07723f9 100644
--- a/drivers/dma/dw-edma/dw-edma-pcie.c
+++ b/drivers/dma/dw-edma/dw-edma-pcie.c
@@ -77,6 +77,7 @@ struct dw_edma_pcie_data {
 
 struct dw_edma_pcie_match_data {
 	const struct dw_edma_pcie_data *data;
+	const struct dw_edma_plat_ops *plat_ops;
 	/*
 	 * Mandatory callback. It may leave @pdata unchanged when the static
 	 * template already describes the device.
@@ -383,7 +384,7 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
 		return -ENOMEM;
 
 	/* Let device-specific discovery override the static template data. */
-	if (!match->parse_caps)
+	if (!match->parse_caps || !match->plat_ops)
 		return -EINVAL;
 
 	err = match->parse_caps(pdev, dma_data);
@@ -435,7 +436,7 @@ static int dw_edma_pcie_probe(struct pci_dev *pdev,
 	chip->mf = dma_data->mf;
 	chip->default_irq_mode = match->default_irq_mode;
 	chip->nr_irqs = nr_irqs;
-	chip->ops = &dw_edma_pcie_plat_ops;
+	chip->ops = match->plat_ops;
 	chip->cfg_non_ll = dma_data->cfg_non_ll;
 
 	chip->ll_wr_cnt = dma_data->wr_ch_cnt;
@@ -577,11 +578,13 @@ static void dw_edma_pcie_remove(struct pci_dev *pdev)
 
 static const struct dw_edma_pcie_match_data snps_edda_match_data = {
 	.data = &snps_edda_data,
+	.plat_ops = &dw_edma_pcie_plat_ops,
 	.parse_caps = dw_edma_pcie_parse_synopsys_caps,
 };
 
 static const struct dw_edma_pcie_match_data xilinx_mdb_match_data = {
 	.data = &xilinx_mdb_data,
+	.plat_ops = &dw_edma_pcie_plat_ops,
 	.parse_caps = dw_edma_pcie_parse_xilinx_caps,
 	.flags = DW_EDMA_PCIE_F_DEVMEM_PHYS_OFF,
 };
-- 
2.51.0