Re: [PATCH v2] scsi: hisi_sas: Add slave_destroy interface for v3 hw

[Martin K. Petersen]

On Sat, 25 Apr 2026 16:20:56 +0800, Yihang Li wrote:

> WARNING is triggered when executing link reset of remote PHY
> and rmmod SAS driver simultaneously. Following is the WARNING log:
> 
> WARNING: CPU: 61 PID: 21818 at drivers/base/core.c:1347 __device_links_no_driver+0xb4/0xc0
>  Call trace:
>   __device_links_no_driver+0xb4/0xc0
>   device_links_driver_cleanup+0xb0/0xfc
>   __device_release_driver+0x198/0x23c
>   device_release_driver+0x38/0x50
>   bus_remove_device+0x130/0x140
>   device_del+0x184/0x434
>   __scsi_remove_device+0x118/0x150
>   scsi_remove_target+0x1bc/0x240
>   sas_rphy_remove+0x90/0x94
>   sas_rphy_delete+0x24/0x3c
>   sas_destruct_devices+0x64/0xa0 [libsas]
>   sas_revalidate_domain+0xe4/0x150 [libsas]
>   process_one_work+0x1e0/0x46c
>   worker_thread+0x15c/0x464
>   kthread+0x160/0x170
>   ret_from_fork+0x10/0x20
>  ---[ end trace 71e059eb58f85d4a ]---
> 
> [...]

Applied to 7.2/scsi-queue, thanks!

[1/1] scsi: hisi_sas: Add slave_destroy interface for v3 hw
      https://git.kernel.org/mkp/scsi/c/67b85a88265d

-- 
Martin K. Petersen