[PATCH v3 09/18] arm64: dts: qcom: qdu1000: Add minidump SRAM config to SCM node
From: Mukesh Ojha
Date: Fri May 22 2026 - 16:02:13 EST
Point the SCM node at the minidump config slot in the always-on SRAM.
Boot firmware reads this word before DDR is initialised on a warm reset
to decide where to deliver the minidump.
Signed-off-by: Mukesh Ojha <mukesh.ojha@xxxxxxxxxxxxxxxx>
---
arch/arm64/boot/dts/qcom/qdu1000.dtsi | 5 +++++
1 file changed, 5 insertions(+)
diff --git a/arch/arm64/boot/dts/qcom/qdu1000.dtsi b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
index 952d4270d118..0c6ae3ff06fb 100644
--- a/arch/arm64/boot/dts/qcom/qdu1000.dtsi
+++ b/arch/arm64/boot/dts/qcom/qdu1000.dtsi
@@ -171,6 +171,7 @@ cluster_sleep_1: cluster-sleep-1 {
firmware {
scm {
compatible = "qcom,scm-qdu1000", "qcom,scm";
+ sram = <&minidump_config>;
};
};
@@ -1369,6 +1370,10 @@ sram@14680000 {
#address-cells = <1>;
#size-cells = <1>;
+ minidump_config: minidump-sram@1c {
+ reg = <0x1c 0x4>;
+ };
+
pil-reloc@94c {
compatible = "qcom,pil-reloc-info";
reg = <0x94c 0xc8>;
--
2.53.0