Re: [PATCH v2 3/3] arm64: dts: qcom: Add Eliza CQS EVK board

[Konrad Dybcio]

On 5/19/26 6:09 PM, Abel Vesa wrote:
> The Eliza CQS EVK board combines the CQ7790S-based (Eliza) SoM with the
> common Eliza EVK base board, which provides connectors for different
> peripherals.
> 
> Add a common Eliza EVK dtsi for the base board bits that can be reused
> alongside other Eliza SoM variants. Then, add the final Eliza CQS EVK dts,
> including the CQS SoM and common EVK dtsi.
> 
> Signed-off-by: Abel Vesa <abel.vesa@xxxxxxxxxxxxxxxx>
> ---
>  arch/arm64/boot/dts/qcom/Makefile          |  1 +
>  arch/arm64/boot/dts/qcom/eliza-cqs-evk.dts | 20 ++++++++++++++++++++
>  arch/arm64/boot/dts/qcom/eliza-evk.dtsi    | 20 ++++++++++++++++++++
>  3 files changed, 41 insertions(+)
> 
> diff --git a/arch/arm64/boot/dts/qcom/Makefile b/arch/arm64/boot/dts/qcom/Makefile
> index 795cee4757ab..e244e808a647 100644
> --- a/arch/arm64/boot/dts/qcom/Makefile
> +++ b/arch/arm64/boot/dts/qcom/Makefile
> @@ -14,6 +14,7 @@ dtb-$(CONFIG_ARCH_QCOM)	+= apq8094-sony-xperia-kitakami-karin_windy.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-db820c.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096sg-db820c.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= apq8096-ifc6640.dtb
> +dtb-$(CONFIG_ARCH_QCOM)	+= eliza-cqs-evk.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= eliza-mtp.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= glymur-crd.dtb
>  dtb-$(CONFIG_ARCH_QCOM)	+= hamoa-iot-evk.dtb
> diff --git a/arch/arm64/boot/dts/qcom/eliza-cqs-evk.dts b/arch/arm64/boot/dts/qcom/eliza-cqs-evk.dts
> new file mode 100644
> index 000000000000..d1cf08ce19d1
> --- /dev/null
> +++ b/arch/arm64/boot/dts/qcom/eliza-cqs-evk.dts
> @@ -0,0 +1,20 @@
> +// SPDX-License-Identifier: BSD-3-Clause
> +/*
> + * Copyright (c) Qualcomm Technologies, Inc. and/or its subsidiaries.
> + */
> +
> +/dts-v1/;
> +
> +#include "eliza-cqs-som.dtsi"
> +#include "eliza-evk.dtsi"
> +
> +/ {
> +	model = "Qualcomm Technologies, Inc. Eliza CQS EVK";
> +	compatible = "qcom,eliza-cqs-evk", "qcom,eliza-cqs-som", "qcom,eliza";
> +};
> +
> +&tlmm {
> +	gpio-reserved-ranges = <20 4>,   /* NFC SPI */
> +			       <111 2>,  /* WCN UART1 */
> +			       <118 1>;  /* NFC Secure I/O */

Are these going to be specific to the CQS-EVK?

Otherwise

Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>

Konrad