[PATCH] arm64: dts: qcom: Add Display Port audio on Arduino Monza

[Srinivas Kandagatla]

Add support for Display port Audio on Arduino VENTUNO-Q board.

Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@xxxxxxxxxxxxxxxx>
CC: Loic Poulain <loic.poulain@xxxxxxxxxxxxxxxx>
---
alsa tplg changes are:
	https://github.com/linux-msm/audioreach-topology/pull/63
Ucm changes are:
	https://github.com/Srinivas-Kandagatla/alsa-ucm-conf/tree/ventuno-q


 .../arm64/boot/dts/qcom/monaco-arduino-monza.dts | 16 ++++++++++++++++
 1 file changed, 16 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
index ca14f0ea4dae..01acc8363cbb 100644
--- a/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
+++ b/arch/arm64/boot/dts/qcom/monaco-arduino-monza.dts
@@ -117,6 +117,22 @@ platform {
 				sound-dai = <&q6apm>;
 			};
 		};
+
+		displayport-0-dai-link {
+			link-name = "DisplayPort0 Playback";
+
+			codec {
+				sound-dai = <&mdss_dp0>;
+			};
+
+			cpu {
+				sound-dai = <&q6apmbedai DISPLAY_PORT_RX_0>;
+			};
+
+			platform {
+				sound-dai = <&q6apm>;
+			};
+		};
 	};
 
 	vdc_3v3: regulator-3v3 {
-- 
2.47.3