[PATCH 02/18] arm64: dts: qcom: msm8996: Fix PCIe wake GPIO polarity

[Krishna Chaitanya Chundru]

The PCIe WAKE# signal is active-low as defined in the PCIe Base
Specification. Fix the wake-gpios polarity by using GPIO_ACTIVE_LOW
instead of GPIO_ACTIVE_HIGH.

Signed-off-by: Krishna Chaitanya Chundru <krishna.chundru@xxxxxxxxxxxxxxxx>
Reviewed-by: Konrad Dybcio <konrad.dybcio@xxxxxxxxxxxxxxxx>
Reviewed-by: Manivannan Sadhasivam <mani@xxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi | 2 +-
 arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi    | 2 +-
 2 files changed, 2 insertions(+), 2 deletions(-)

diff --git a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
index d55e4075040f..5b42c266557a 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-sony-xperia-tone.dtsi
@@ -192,7 +192,7 @@ &mmcc {
 
 &pcie0 {
 	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
 	vddpe-3v3-supply = <&wlan_en>;
 	vdda-supply = <&pm8994_l28>;
 	status = "okay";
diff --git a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
index 77ad613590a3..2abcc733dad8 100644
--- a/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
+++ b/arch/arm64/boot/dts/qcom/msm8996-xiaomi-common.dtsi
@@ -280,7 +280,7 @@ &pcie0 {
 	vdda-supply = <&vreg_l28a_0p925>;
 
 	perst-gpios = <&tlmm 35 GPIO_ACTIVE_LOW>;
-	wake-gpios = <&tlmm 37 GPIO_ACTIVE_HIGH>;
+	wake-gpios = <&tlmm 37 GPIO_ACTIVE_LOW>;
 };
 
 &pcie_phy {

-- 
2.34.1