[PATCH net-next 4/5] net: dsa: mxl862xx: add support for SerDes ports
From: Daniel Golle
Date: Tue May 19 2026 - 13:42:39 EST
The MxL862xx has two XPCS/SerDes interfaces (XPCS0 for ports 9-12,
XPCS1 for ports 13-16). Each can operate in various single-lane modes
(SGMII, 1000BASE-X, 2500BASE-X, 10GBASE-R, 10GBASE-KR, USXGMII) or as
QSGMII or 10G_QXGMII providing four sub-ports per interface.
Implement phylink PCS operations using the firmware's XPCS API:
- pcs_config: configure negotiation mode and CL37/SGMII advertising.
- pcs_get_state: read link/speed/duplex/LPA from firmware and decode
using phylink's standard CL37, SGMII, and USXGMII decoders, with
firmware-resolved speed/duplex override for downshift detection.
- pcs_an_restart: restart CL37 or CL73 auto-negotiation.
- pcs_link_up: force speed/duplex for SGMII.
- pcs_inband_caps: report per-mode in-band status capabilities.
Register a PCS instance for each SerDes interface and
QSGMII/10G_QXGMII sub-ports during setup. Advertise the supported
interface modes in phylink_get_caps based on port number.
Lacking support for expressing PHY-side role modes in Linux only the
MAC-side of SGMII, QSGMII, USXGMII and 10G_QXGMII are implemented for
now.
Signed-off-by: Daniel Golle <daniel@xxxxxxxxxxxxxx>
---
drivers/net/dsa/mxl862xx/mxl862xx-api.h | 302 +++++++++++++++++++
drivers/net/dsa/mxl862xx/mxl862xx-cmd.h | 9 +
drivers/net/dsa/mxl862xx/mxl862xx-phylink.c | 306 +++++++++++++++++++-
drivers/net/dsa/mxl862xx/mxl862xx-phylink.h | 10 +
drivers/net/dsa/mxl862xx/mxl862xx.c | 6 +-
drivers/net/dsa/mxl862xx/mxl862xx.h | 22 ++
6 files changed, 652 insertions(+), 3 deletions(-)
diff --git a/drivers/net/dsa/mxl862xx/mxl862xx-api.h b/drivers/net/dsa/mxl862xx/mxl862xx-api.h
index fb21ddc1bf1c..6e332c99b245 100644
--- a/drivers/net/dsa/mxl862xx/mxl862xx-api.h
+++ b/drivers/net/dsa/mxl862xx/mxl862xx-api.h
@@ -1366,4 +1366,306 @@ struct mxl862xx_rmon_port_cnt {
__le64 tx_good_bytes;
} __packed;
+/**
+ * enum mxl862xx_xpcs_if_mode - XPCS interface mode
+ * @MXL862XX_XPCS_IF_SGMII: SGMII
+ * @MXL862XX_XPCS_IF_1000BASEX: 1000BASE-X
+ * @MXL862XX_XPCS_IF_2500BASEX: 2500BASE-X
+ * @MXL862XX_XPCS_IF_USXGMII: USXGMII (single or quad)
+ * @MXL862XX_XPCS_IF_10GBASER: 10GBASE-R
+ * @MXL862XX_XPCS_IF_10GKR: 10GBASE-KR
+ * @MXL862XX_XPCS_IF_5GBASER: 5GBASE-R
+ * @MXL862XX_XPCS_IF_QSGMII: QSGMII
+ */
+enum mxl862xx_xpcs_if_mode {
+ MXL862XX_XPCS_IF_SGMII = 0,
+ MXL862XX_XPCS_IF_1000BASEX = 1,
+ MXL862XX_XPCS_IF_2500BASEX = 2,
+ MXL862XX_XPCS_IF_USXGMII = 3,
+ MXL862XX_XPCS_IF_10GBASER = 4,
+ MXL862XX_XPCS_IF_10GKR = 5,
+ MXL862XX_XPCS_IF_5GBASER = 6,
+ MXL862XX_XPCS_IF_QSGMII = 7,
+};
+
+/**
+ * enum mxl862xx_xpcs_neg_mode - PCS negotiation mode
+ * @MXL862XX_XPCS_NEG_NONE: no inband negotiation
+ * @MXL862XX_XPCS_NEG_INBAND_AN_OFF: inband selected but AN disabled
+ * @MXL862XX_XPCS_NEG_INBAND_AN_ON: inband with AN enabled
+ */
+enum mxl862xx_xpcs_neg_mode {
+ MXL862XX_XPCS_NEG_NONE = 0,
+ MXL862XX_XPCS_NEG_INBAND_AN_OFF = 1,
+ MXL862XX_XPCS_NEG_INBAND_AN_ON = 2,
+};
+
+/**
+ * enum mxl862xx_xpcs_role - PCS protocol role
+ * @MXL862XX_XPCS_ROLE_MAC: local end is MAC side (TX_CONFIG = 0)
+ * @MXL862XX_XPCS_ROLE_PHY: local end is PHY side (TX_CONFIG = 1)
+ *
+ * Selects the role the XPCS plays in protocols that have an asymmetric
+ * AN code word (Cisco SGMII / QSGMII / USXGMII). Drives
+ * VR_MII_AN_CTRL.TX_CONFIG: 0 means the local end receives the partner's
+ * AN word, 1 means it sources one. Ignored for symmetric protocols
+ * (1000BASE-X, 2500BASE-X, 10GBASE-R/KR).
+ */
+enum mxl862xx_xpcs_role {
+ MXL862XX_XPCS_ROLE_MAC = 0,
+ MXL862XX_XPCS_ROLE_PHY = 1,
+};
+
+/**
+ * enum mxl862xx_xpcs_usx_lane_mode - USXGMII lane mode
+ * @MXL862XX_XPCS_USX_SINGLE: single USXGMII lane
+ * @MXL862XX_XPCS_USX_QUAD: quad USXGMII (4 ports per lane)
+ */
+enum mxl862xx_xpcs_usx_lane_mode {
+ MXL862XX_XPCS_USX_SINGLE = 0,
+ MXL862XX_XPCS_USX_QUAD = 1,
+};
+
+/**
+ * union mxl862xx_xpcs_an_word - XPCS AN code word, tagged by interface mode
+ * @cl37: 16-bit base-page word exchanged over the CL37 hardware AN path
+ * (SR_MII_AN_ADV on write, SR_MII_LP_BABL on read). Carries the
+ * 802.3 CL37 base page for 1000BASE-X/2500BASE-X and the Cisco
+ * SGMII config word for SGMII/QSGMII.
+ * @usx: USXGMII 16-bit AN code word, MDIO_USXGMII_* layout
+ * @cl73: CL73 48-bit base page (10GBASE-KR), three 16-bit registers per
+ * 802.3 Annex 28C
+ * @cl73.adv1: CL73 SR_AN_ADV1 / SR_AN_LP_ABL1
+ * @cl73.adv2: CL73 SR_AN_ADV2 / SR_AN_LP_ABL2
+ * @cl73.adv3: CL73 SR_AN_ADV3 / SR_AN_LP_ABL3
+ *
+ * The host picks the right member based on the interface field of the
+ * surrounding struct (and, for the asymmetric protocols, on the role).
+ */
+union mxl862xx_xpcs_an_word {
+ __le16 cl37;
+ __le16 usx;
+ struct {
+ __le16 adv1;
+ __le16 adv2;
+ __le16 adv3;
+ } cl73;
+} __packed;
+
+/**
+ * enum mxl862xx_xpcs_speed - PCS speed values
+ * @MXL862XX_XPCS_SPEED_UNKNOWN: unknown speed
+ * @MXL862XX_XPCS_SPEED_10: 10 Mbps
+ * @MXL862XX_XPCS_SPEED_100: 100 Mbps
+ * @MXL862XX_XPCS_SPEED_1000: 1000 Mbps
+ * @MXL862XX_XPCS_SPEED_2500: 2500 Mbps
+ * @MXL862XX_XPCS_SPEED_5000: 5000 Mbps
+ * @MXL862XX_XPCS_SPEED_10000: 10000 Mbps
+ */
+enum mxl862xx_xpcs_speed {
+ MXL862XX_XPCS_SPEED_UNKNOWN = 0,
+ MXL862XX_XPCS_SPEED_10 = 10,
+ MXL862XX_XPCS_SPEED_100 = 100,
+ MXL862XX_XPCS_SPEED_1000 = 1000,
+ MXL862XX_XPCS_SPEED_2500 = 2500,
+ MXL862XX_XPCS_SPEED_5000 = 5000,
+ MXL862XX_XPCS_SPEED_10000 = 10000,
+};
+
+/**
+ * enum mxl862xx_xpcs_duplex - PCS duplex mode
+ * @MXL862XX_XPCS_DUPLEX_HALF: half duplex
+ * @MXL862XX_XPCS_DUPLEX_FULL: full duplex
+ */
+enum mxl862xx_xpcs_duplex {
+ MXL862XX_XPCS_DUPLEX_HALF = 0,
+ MXL862XX_XPCS_DUPLEX_FULL = 1,
+};
+
+/**
+ * enum mxl862xx_xpcs_loopback_mode - XPCS loopback mode
+ * @MXL862XX_XPCS_LB_DISABLE: disable all loopback
+ * @MXL862XX_XPCS_LB_PCS_SERIAL: PCS TX-to-RX serial loopback
+ * @MXL862XX_XPCS_LB_PCS_PARALLEL: PCS RX-to-TX parallel loopback
+ * @MXL862XX_XPCS_LB_PMA_SERIAL: PMA TX-to-RX serial loopback
+ * @MXL862XX_XPCS_LB_PMA_PARALLEL: PMA RX-to-TX parallel loopback
+ */
+enum mxl862xx_xpcs_loopback_mode {
+ MXL862XX_XPCS_LB_DISABLE = 0,
+ MXL862XX_XPCS_LB_PCS_SERIAL = 1,
+ MXL862XX_XPCS_LB_PCS_PARALLEL = 2,
+ MXL862XX_XPCS_LB_PMA_SERIAL = 3,
+ MXL862XX_XPCS_LB_PMA_PARALLEL = 4,
+};
+
+/**
+ * enum mxl862xx_xpcs_reset_type - XPCS reset type
+ * @MXL862XX_XPCS_RESET_VR: vendor-specific reset (fast)
+ * @MXL862XX_XPCS_RESET_SOFT: PCS soft reset
+ * @MXL862XX_XPCS_RESET_HARD: full hardware reset
+ */
+enum mxl862xx_xpcs_reset_type {
+ MXL862XX_XPCS_RESET_VR = 0,
+ MXL862XX_XPCS_RESET_SOFT = 1,
+ MXL862XX_XPCS_RESET_HARD = 2,
+};
+
+/**
+ * struct mxl862xx_xpcs_pcs_cfg - PCS configuration parameters
+ * @port_id: XPCS port index (0-3)
+ * @interface: PCS interface mode. See &enum mxl862xx_xpcs_if_mode
+ * @neg_mode: PCS negotiation mode. See &enum mxl862xx_xpcs_neg_mode
+ * @permit_pause: Allow pause to MAC
+ * @usx_lane_mode: USXGMII lane mode.
+ * See &enum mxl862xx_xpcs_usx_lane_mode
+ * @role: PCS protocol role. See &enum mxl862xx_xpcs_role
+ * @__rsv: reserved
+ * @advertising: AN code word the local end transmits. The active union
+ * member is selected by @interface (and, for the asymmetric
+ * protocols, by @role). Ignored when the local end does
+ * not transmit an AN word (role=MAC for SGMII/QSGMII/
+ * USXGMII, 10GBASE-R, 5GBASE-R) or when @neg_mode is not
+ * INBAND_AN_ON. Pass all-zero to keep the firmware default
+ * advertisement.
+ * @result: Firmware result. >0 means the host must follow with an AN
+ * restart, 0 means no host follow-up is needed, <0 is an errno.
+ */
+struct mxl862xx_xpcs_pcs_cfg {
+ u8 port_id:2;
+ u8 interface:6; /* enum mxl862xx_xpcs_if_mode */
+ u8 neg_mode:2; /* enum mxl862xx_xpcs_neg_mode */
+ u8 permit_pause:1;
+ u8 usx_lane_mode:2; /* enum mxl862xx_xpcs_usx_lane_mode */
+ u8 role:1; /* enum mxl862xx_xpcs_role */
+ u8 __rsv:2;
+ union mxl862xx_xpcs_an_word advertising;
+ __le16 result;
+} __packed;
+
+/**
+ * struct mxl862xx_xpcs_pcs_state - PCS link state
+ * @port_id: XPCS port index (0-3) (input)
+ * @interface: PCS interface mode (input).
+ * See &enum mxl862xx_xpcs_if_mode
+ * @usx_lane_mode: USX lane mode (input)
+ * @usx_subport: USX sub-port 0-3 (input)
+ * @link: Link up (1) / down (0) (output)
+ * @an_complete: Auto-negotiation complete (output)
+ * @duplex: Duplex mode (output). See &enum mxl862xx_xpcs_duplex
+ * @pcs_fault: PCS fault (output)
+ * @pause: Pause negotiation result, bit 0 symmetric, bit 1 asymmetric
+ * (output)
+ * @lp_eee_cap: Link partner supports EEE (output)
+ * @lp_eee_cs_cap: Link partner supports EEE clock-stop (output)
+ * @__rsv: reserved
+ * @__pad: padding
+ * @speed: Resolved speed (output). See &enum mxl862xx_xpcs_speed
+ * @lpa: Link partner ability word (output). Same union as
+ * &union mxl862xx_xpcs_an_word; the host picks the member based on
+ * @interface.
+ */
+struct mxl862xx_xpcs_pcs_state {
+ u8 port_id:2;
+ u8 interface:6; /* enum mxl862xx_xpcs_if_mode */
+ u8 usx_lane_mode:2; /* enum mxl862xx_xpcs_usx_lane_mode */
+ u8 usx_subport:2;
+ u8 link:1;
+ u8 an_complete:1;
+ u8 duplex:1; /* enum mxl862xx_xpcs_duplex */
+ u8 pcs_fault:1;
+ u8 pause:2;
+ u8 lp_eee_cap:1;
+ u8 lp_eee_cs_cap:1;
+ u8 __rsv:4;
+ u8 __pad;
+ __le16 speed; /* enum mxl862xx_xpcs_speed */
+ union mxl862xx_xpcs_an_word lpa;
+} __packed;
+
+/**
+ * struct mxl862xx_xpcs_pcs_disable - PCS disable parameters
+ * @port_id: XPCS port index
+ * @__pad: padding
+ * @result: Firmware result. 0 on success, <0 on error.
+ *
+ * Asserts IDDQ + PHY + XPCS resets to power down the SERDES when the
+ * port is admin-down or no module is plugged in. The next PCS config
+ * implicitly powers it back up and reprograms the desired interface.
+ */
+struct mxl862xx_xpcs_pcs_disable {
+ u8 port_id;
+ u8 __pad;
+ __le16 result;
+} __packed;
+
+/**
+ * struct mxl862xx_xpcs_an_restart - AN restart parameters
+ * @port_id: XPCS port index (0-3)
+ * @interface: PCS interface mode. See &enum mxl862xx_xpcs_if_mode
+ * @usx_lane_mode: USX lane mode
+ * @__rsv: reserved
+ * @result: Firmware result. 0 on success, <0 on error.
+ *
+ * Restarts auto-negotiation on the given XPCS port. The SERDES must
+ * already be configured.
+ */
+struct mxl862xx_xpcs_an_restart {
+ u8 port_id:2;
+ u8 interface:6; /* enum mxl862xx_xpcs_if_mode */
+ u8 usx_lane_mode:2; /* enum mxl862xx_xpcs_usx_lane_mode */
+ u8 __rsv:6;
+ __le16 result;
+} __packed;
+
+/**
+ * struct mxl862xx_xpcs_pcs_link_up - PCS link-up parameters
+ * @port_id: XPCS port index (0-3)
+ * @interface: PCS interface mode. See &enum mxl862xx_xpcs_if_mode
+ * @duplex: Duplex mode. See &enum mxl862xx_xpcs_duplex
+ * @usx_lane_mode: USX lane mode (USXGMII only; ignored otherwise).
+ * See &enum mxl862xx_xpcs_usx_lane_mode
+ * @usx_subport: USX sub-port 0-3 (QUSXGMII only; ignored otherwise)
+ * @__rsv0: reserved
+ * @speed: Resolved speed. See &enum mxl862xx_xpcs_speed
+ * @result: Firmware result. 0 on success, <0 is errno.
+ *
+ * Called once per link-up event after the host has resolved the
+ * line-side speed/duplex (from the PHY's read_status, from a preceding
+ * PCS get-state, or from a fixed-link description).
+ */
+struct mxl862xx_xpcs_pcs_link_up {
+ u8 port_id:2;
+ u8 interface:6; /* enum mxl862xx_xpcs_if_mode */
+ u8 duplex:1; /* enum mxl862xx_xpcs_duplex */
+ u8 usx_lane_mode:2; /* enum mxl862xx_xpcs_usx_lane_mode */
+ u8 usx_subport:2;
+ u8 __rsv0:3;
+ __le16 speed; /* enum mxl862xx_xpcs_speed */
+ __le16 result;
+} __packed;
+
+/**
+ * struct mxl862xx_xpcs_loopback_cfg - loopback control
+ * @port_id: XPCS port index
+ * @mode: loopback mode. See &enum mxl862xx_xpcs_loopback_mode
+ * @result: firmware result
+ */
+struct mxl862xx_xpcs_loopback_cfg {
+ u8 port_id;
+ u8 mode; /* enum mxl862xx_xpcs_loopback_mode */
+ __le16 result;
+} __packed;
+
+/**
+ * struct mxl862xx_xpcs_reset_cfg - XPCS reset
+ * @port_id: XPCS port index
+ * @reset_type: reset type. See &enum mxl862xx_xpcs_reset_type
+ * @result: firmware result
+ */
+struct mxl862xx_xpcs_reset_cfg {
+ u8 port_id;
+ u8 reset_type; /* enum mxl862xx_xpcs_reset_type */
+ __le16 result;
+} __packed;
+
#endif /* __MXL862XX_API_H */
diff --git a/drivers/net/dsa/mxl862xx/mxl862xx-cmd.h b/drivers/net/dsa/mxl862xx/mxl862xx-cmd.h
index f1ea40aa7ea0..c87a955c13c4 100644
--- a/drivers/net/dsa/mxl862xx/mxl862xx-cmd.h
+++ b/drivers/net/dsa/mxl862xx/mxl862xx-cmd.h
@@ -24,6 +24,7 @@
#define MXL862XX_SS_MAGIC 0x1600
#define GPY_GPY2XX_MAGIC 0x1800
#define SYS_MISC_MAGIC 0x1900
+#define MXL862XX_XPCS_MAGIC 0x1a00
#define MXL862XX_COMMON_CFGGET (MXL862XX_COMMON_MAGIC + 0x9)
#define MXL862XX_COMMON_CFGSET (MXL862XX_COMMON_MAGIC + 0xa)
@@ -71,6 +72,14 @@
#define SYS_MISC_FW_VERSION (SYS_MISC_MAGIC + 0x2)
+#define MXL862XX_XPCS_PCS_CONFIG (MXL862XX_XPCS_MAGIC + 0x1)
+#define MXL862XX_XPCS_PCS_GET_STATE (MXL862XX_XPCS_MAGIC + 0x2)
+#define MXL862XX_XPCS_PCS_DISABLE (MXL862XX_XPCS_MAGIC + 0x4)
+#define MXL862XX_XPCS_AN_RESTART (MXL862XX_XPCS_MAGIC + 0x5)
+#define MXL862XX_XPCS_PCS_LINK_UP (MXL862XX_XPCS_MAGIC + 0x7)
+#define MXL862XX_XPCS_LOOPBACK (MXL862XX_XPCS_MAGIC + 0x8)
+#define MXL862XX_XPCS_RESET (MXL862XX_XPCS_MAGIC + 0x9)
+
#define MMD_API_MAXIMUM_ID 0x7fff
#endif /* __MXL862XX_CMD_H */
diff --git a/drivers/net/dsa/mxl862xx/mxl862xx-phylink.c b/drivers/net/dsa/mxl862xx/mxl862xx-phylink.c
index f17c429d1f1d..f99c69984357 100644
--- a/drivers/net/dsa/mxl862xx/mxl862xx-phylink.c
+++ b/drivers/net/dsa/mxl862xx/mxl862xx-phylink.c
@@ -11,6 +11,9 @@
#include <net/dsa.h>
#include "mxl862xx.h"
+#include "mxl862xx-api.h"
+#include "mxl862xx-cmd.h"
+#include "mxl862xx-host.h"
#include "mxl862xx-phylink.h"
void mxl862xx_phylink_get_caps(struct dsa_switch *ds, int port,
@@ -19,8 +22,306 @@ void mxl862xx_phylink_get_caps(struct dsa_switch *ds, int port,
config->mac_capabilities = MAC_ASYM_PAUSE | MAC_SYM_PAUSE | MAC_10 |
MAC_100 | MAC_1000 | MAC_2500FD;
- __set_bit(PHY_INTERFACE_MODE_INTERNAL,
- config->supported_interfaces);
+ switch (port) {
+ case 1 ... 8:
+ __set_bit(PHY_INTERFACE_MODE_INTERNAL,
+ config->supported_interfaces);
+ break;
+ case 9:
+ case 13:
+ __set_bit(PHY_INTERFACE_MODE_SGMII, config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_10GKR, config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_USXGMII, config->supported_interfaces);
+ fallthrough;
+ case 10 ... 12:
+ case 14 ... 16:
+ __set_bit(PHY_INTERFACE_MODE_QSGMII, config->supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_10G_QXGMII, config->supported_interfaces);
+
+ break;
+ default:
+ break;
+ }
+
+ if (port == 9 || port == 13)
+ config->mac_capabilities |= MAC_10000FD | MAC_5000FD;
+}
+
+static struct mxl862xx_pcs *pcs_to_mxl862xx_pcs(struct phylink_pcs *pcs)
+{
+ return container_of(pcs, struct mxl862xx_pcs, pcs);
+}
+
+static int mxl862xx_xpcs_if_mode(phy_interface_t interface)
+{
+ switch (interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ return MXL862XX_XPCS_IF_SGMII;
+ case PHY_INTERFACE_MODE_QSGMII:
+ return MXL862XX_XPCS_IF_QSGMII;
+ case PHY_INTERFACE_MODE_1000BASEX:
+ return MXL862XX_XPCS_IF_1000BASEX;
+ case PHY_INTERFACE_MODE_2500BASEX:
+ return MXL862XX_XPCS_IF_2500BASEX;
+ case PHY_INTERFACE_MODE_USXGMII:
+ case PHY_INTERFACE_MODE_10G_QXGMII:
+ return MXL862XX_XPCS_IF_USXGMII;
+ case PHY_INTERFACE_MODE_10GBASER:
+ return MXL862XX_XPCS_IF_10GBASER;
+ case PHY_INTERFACE_MODE_10GKR:
+ return MXL862XX_XPCS_IF_10GKR;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int mxl862xx_xpcs_neg_mode(unsigned int neg_mode)
+{
+ if (!(neg_mode & PHYLINK_PCS_NEG_INBAND))
+ return MXL862XX_XPCS_NEG_NONE;
+ if (neg_mode & PHYLINK_PCS_NEG_ENABLED)
+ return MXL862XX_XPCS_NEG_INBAND_AN_ON;
+ return MXL862XX_XPCS_NEG_INBAND_AN_OFF;
+}
+
+static void mxl862xx_pcs_disable(struct phylink_pcs *pcs)
+{
+ struct mxl862xx_pcs *mpcs = pcs_to_mxl862xx_pcs(pcs);
+ struct mxl862xx_priv *priv = mpcs->priv;
+ struct mxl862xx_xpcs_pcs_disable dis = {};
+
+ if (mpcs->slot != 0)
+ return;
+
+ dis.port_id = mpcs->serdes_id;
+
+ MXL862XX_API_WRITE(priv, MXL862XX_XPCS_PCS_DISABLE, dis);
+}
+
+static int mxl862xx_pcs_config(struct phylink_pcs *pcs, unsigned int neg_mode,
+ phy_interface_t interface,
+ const unsigned long *advertising,
+ bool permit_pause_to_mac)
+{
+ struct mxl862xx_pcs *mpcs = pcs_to_mxl862xx_pcs(pcs);
+ struct mxl862xx_priv *priv = mpcs->priv;
+ struct mxl862xx_xpcs_pcs_cfg cfg = {};
+ int if_mode, ret;
+ u16 adv;
+
+ if (mpcs->slot != 0)
+ return 0;
+
+ if_mode = mxl862xx_xpcs_if_mode(interface);
+ if (if_mode < 0) {
+ dev_err(priv->ds->dev, "unsupported interface: %s\n",
+ phy_modes(interface));
+ return if_mode;
+ }
+
+ mpcs->if_mode = if_mode;
+
+ cfg.port_id = mpcs->serdes_id;
+ cfg.usx_lane_mode = (interface == PHY_INTERFACE_MODE_10G_QXGMII) ?
+ MXL862XX_XPCS_USX_QUAD : MXL862XX_XPCS_USX_SINGLE;
+ cfg.interface = if_mode;
+ cfg.neg_mode = mxl862xx_xpcs_neg_mode(neg_mode);
+ cfg.role = MXL862XX_XPCS_ROLE_MAC;
+ cfg.permit_pause = permit_pause_to_mac ? 1 : 0;
+
+ if (neg_mode & PHYLINK_PCS_NEG_INBAND) {
+ switch (interface) {
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ adv = linkmode_adv_to_mii_adv_x(advertising,
+ ETHTOOL_LINK_MODE_1000baseX_Full_BIT);
+ cfg.advertising.cl37 = cpu_to_le16(adv);
+ break;
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ cfg.advertising.cl37 = cpu_to_le16(ADVERTISE_SGMII);
+ break;
+ default:
+ break;
+ }
+ }
+
+ ret = MXL862XX_API_READ(priv, MXL862XX_XPCS_PCS_CONFIG, cfg);
+ if (ret)
+ return ret;
+
+ return le16_to_cpu(cfg.result) > 0 ? 1 : 0;
+}
+
+static void mxl862xx_pcs_get_state(struct phylink_pcs *pcs,
+ unsigned int neg_mode,
+ struct phylink_link_state *state)
+{
+ struct mxl862xx_pcs *mpcs = pcs_to_mxl862xx_pcs(pcs);
+ struct mxl862xx_priv *priv = mpcs->priv;
+ struct mxl862xx_xpcs_pcs_state st = {};
+ int if_mode, ret;
+ u16 bmsr;
+
+ if_mode = mxl862xx_xpcs_if_mode(state->interface);
+ if (if_mode < 0)
+ return;
+
+ st.port_id = mpcs->serdes_id;
+ st.interface = if_mode;
+ st.usx_subport = mpcs->slot;
+
+ ret = MXL862XX_API_READ(priv, MXL862XX_XPCS_PCS_GET_STATE, st);
+ if (ret)
+ return;
+
+ state->link = st.link && !st.pcs_fault;
+ state->an_complete = st.an_complete;
+
+ switch (state->interface) {
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ bmsr = (state->link ? BMSR_LSTATUS : 0) |
+ (state->an_complete ? BMSR_ANEGCOMPLETE : 0);
+ phylink_mii_c22_pcs_decode_state(state, neg_mode, bmsr,
+ le16_to_cpu(st.lpa.cl37));
+ break;
+
+ case PHY_INTERFACE_MODE_USXGMII:
+ case PHY_INTERFACE_MODE_10G_QXGMII:
+ if (state->link)
+ phylink_decode_usxgmii_word(state,
+ le16_to_cpu(st.lpa.usx));
+ break;
+
+ case PHY_INTERFACE_MODE_10GBASER:
+ case PHY_INTERFACE_MODE_10GKR:
+ if (state->link) {
+ state->speed = SPEED_10000;
+ state->duplex = DUPLEX_FULL;
+ }
+ break;
+
+ default:
+ state->link = false;
+ break;
+ }
+}
+
+static void mxl862xx_pcs_an_restart(struct phylink_pcs *pcs)
+{
+ struct mxl862xx_pcs *mpcs = pcs_to_mxl862xx_pcs(pcs);
+ struct mxl862xx_priv *priv = mpcs->priv;
+ struct mxl862xx_xpcs_an_restart an = {};
+
+ if (mpcs->slot != 0)
+ return;
+
+ an.port_id = mpcs->serdes_id;
+ an.interface = mpcs->if_mode;
+
+ MXL862XX_API_WRITE(priv, MXL862XX_XPCS_AN_RESTART, an);
+}
+
+static void mxl862xx_pcs_link_up(struct phylink_pcs *pcs, unsigned int neg_mode,
+ phy_interface_t interface, int speed,
+ int duplex)
+{
+ struct mxl862xx_pcs *mpcs = pcs_to_mxl862xx_pcs(pcs);
+ struct mxl862xx_priv *priv = mpcs->priv;
+ struct mxl862xx_xpcs_pcs_link_up lu = {};
+ int if_mode;
+
+ if (mpcs->slot != 0)
+ return;
+
+ if_mode = mxl862xx_xpcs_if_mode(interface);
+ if (if_mode < 0)
+ return;
+
+ lu.port_id = mpcs->serdes_id;
+ lu.interface = if_mode;
+ lu.duplex = (duplex == DUPLEX_FULL) ? MXL862XX_XPCS_DUPLEX_FULL :
+ MXL862XX_XPCS_DUPLEX_HALF;
+ lu.speed = cpu_to_le16(speed);
+
+ MXL862XX_API_WRITE(priv, MXL862XX_XPCS_PCS_LINK_UP, lu);
+}
+
+static unsigned int mxl862xx_pcs_inband_caps(struct phylink_pcs *pcs,
+ phy_interface_t interface)
+{
+ switch (interface) {
+ case PHY_INTERFACE_MODE_SGMII:
+ case PHY_INTERFACE_MODE_QSGMII:
+ case PHY_INTERFACE_MODE_1000BASEX:
+ case PHY_INTERFACE_MODE_2500BASEX:
+ return LINK_INBAND_DISABLE | LINK_INBAND_ENABLE;
+ case PHY_INTERFACE_MODE_USXGMII:
+ case PHY_INTERFACE_MODE_10G_QXGMII:
+ case PHY_INTERFACE_MODE_10GKR:
+ return LINK_INBAND_ENABLE;
+ case PHY_INTERFACE_MODE_10GBASER:
+ return LINK_INBAND_DISABLE;
+ default:
+ return 0;
+ }
+}
+
+static const struct phylink_pcs_ops mxl862xx_pcs_ops = {
+ .pcs_disable = mxl862xx_pcs_disable,
+ .pcs_config = mxl862xx_pcs_config,
+ .pcs_get_state = mxl862xx_pcs_get_state,
+ .pcs_an_restart = mxl862xx_pcs_an_restart,
+ .pcs_link_up = mxl862xx_pcs_link_up,
+ .pcs_inband_caps = mxl862xx_pcs_inband_caps,
+};
+
+void mxl862xx_setup_pcs(struct mxl862xx_priv *priv, struct mxl862xx_pcs *pcs,
+ int port)
+{
+ pcs->priv = priv;
+ pcs->serdes_id = MXL862XX_SERDES_PORT_ID(port);
+ pcs->slot = MXL862XX_SERDES_SLOT(port);
+
+ pcs->pcs.ops = &mxl862xx_pcs_ops;
+ pcs->pcs.poll = true;
+
+ __set_bit(PHY_INTERFACE_MODE_QSGMII, pcs->pcs.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_10G_QXGMII, pcs->pcs.supported_interfaces);
+ if (pcs->slot != 0)
+ return;
+
+ __set_bit(PHY_INTERFACE_MODE_SGMII, pcs->pcs.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_1000BASEX, pcs->pcs.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_2500BASEX, pcs->pcs.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_10GBASER, pcs->pcs.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_10GKR, pcs->pcs.supported_interfaces);
+ __set_bit(PHY_INTERFACE_MODE_USXGMII, pcs->pcs.supported_interfaces);
+}
+
+static struct phylink_pcs *
+mxl862xx_phylink_mac_select_pcs(struct phylink_config *config,
+ phy_interface_t interface)
+{
+ struct dsa_port *dp = dsa_phylink_to_port(config);
+ struct mxl862xx_priv *priv = dp->ds->priv;
+ int port = dp->index;
+
+ if (!MXL862XX_FW_VER_MIN(priv, 1, 0, 84))
+ return NULL;
+
+ switch (port) {
+ case 9 ... 16:
+ return &priv->serdes_ports[port - 9].pcs;
+ default:
+ return NULL;
+ }
}
static void mxl862xx_phylink_mac_config(struct phylink_config *config,
@@ -48,4 +349,5 @@ const struct phylink_mac_ops mxl862xx_phylink_mac_ops = {
.mac_config = mxl862xx_phylink_mac_config,
.mac_link_down = mxl862xx_phylink_mac_link_down,
.mac_link_up = mxl862xx_phylink_mac_link_up,
+ .mac_select_pcs = mxl862xx_phylink_mac_select_pcs,
};
diff --git a/drivers/net/dsa/mxl862xx/mxl862xx-phylink.h b/drivers/net/dsa/mxl862xx/mxl862xx-phylink.h
index c3d5215bdf60..54a4c652ec5a 100644
--- a/drivers/net/dsa/mxl862xx/mxl862xx-phylink.h
+++ b/drivers/net/dsa/mxl862xx/mxl862xx-phylink.h
@@ -7,8 +7,18 @@
#include "mxl862xx.h"
+#define MXL862XX_SERDES_SLOT(port) \
+ (((port) - MXL862XX_FIRST_SERDES_PORT) % MXL862XX_SERDES_SLOTS)
+#define MXL862XX_SERDES_PORT_ID(port) \
+ (((port) - MXL862XX_FIRST_SERDES_PORT) / MXL862XX_SERDES_SLOTS)
+#define MXL862XX_PCS_PORT(mpcs) \
+ (MXL862XX_FIRST_SERDES_PORT + \
+ (mpcs)->serdes_id * MXL862XX_SERDES_SLOTS + (mpcs)->slot)
+
extern const struct phylink_mac_ops mxl862xx_phylink_mac_ops;
void mxl862xx_phylink_get_caps(struct dsa_switch *ds, int port,
struct phylink_config *config);
+void mxl862xx_setup_pcs(struct mxl862xx_priv *priv, struct mxl862xx_pcs *pcs,
+ int port);
#endif /* __MXL862XX_PHYLINK_H */
diff --git a/drivers/net/dsa/mxl862xx/mxl862xx.c b/drivers/net/dsa/mxl862xx/mxl862xx.c
index 0b1a23364eb5..0af41efccbc6 100644
--- a/drivers/net/dsa/mxl862xx/mxl862xx.c
+++ b/drivers/net/dsa/mxl862xx/mxl862xx.c
@@ -622,7 +622,7 @@ static int mxl862xx_setup(struct dsa_switch *ds)
int n_user_ports = 0, max_vlans;
int ingress_finals, vid_rules;
struct dsa_port *dp;
- int ret;
+ int ret, i;
ret = mxl862xx_reset(priv);
if (ret)
@@ -632,6 +632,10 @@ static int mxl862xx_setup(struct dsa_switch *ds)
if (ret)
return ret;
+ for (i = 0; i < ARRAY_SIZE(priv->serdes_ports); i++)
+ mxl862xx_setup_pcs(priv, &priv->serdes_ports[i],
+ i + MXL862XX_FIRST_SERDES_PORT);
+
/* Calculate Extended VLAN block sizes.
* With VLAN Filter handling VID membership checks:
* Ingress: only final catchall rules (PVID insertion, 802.1Q
diff --git a/drivers/net/dsa/mxl862xx/mxl862xx.h b/drivers/net/dsa/mxl862xx/mxl862xx.h
index 79fd32c4db4e..1c75bb078a9a 100644
--- a/drivers/net/dsa/mxl862xx/mxl862xx.h
+++ b/drivers/net/dsa/mxl862xx/mxl862xx.h
@@ -11,6 +11,9 @@
struct mxl862xx_priv;
#define MXL862XX_MAX_PORTS 17
+#define MXL862XX_FIRST_SERDES_PORT 9
+#define MXL862XX_SERDES_SLOTS 4
+
#define MXL862XX_DEFAULT_BRIDGE 0
#define MXL862XX_MAX_BRIDGES 48
#define MXL862XX_MAX_BRIDGE_PORTS 128
@@ -242,6 +245,22 @@ struct mxl862xx_port {
spinlock_t stats_lock; /* protects stats accumulators */
};
+/**
+ * struct mxl862xx_pcs - link SerDes interfaces to bridge ports
+ * @pcs: &struct phylink_pcs instance
+ * @priv: pointer to &struct mxl862xx_priv
+ * @serdes_id: SerDes instance index (0 or 1)
+ * @slot: slot within the SerDes (0-3 for QSGMII/QUSXGMII, 0 otherwise)
+ * @if_mode: cached firmware interface mode (enum mxl862xx_xpcs_if_mode)
+ */
+struct mxl862xx_pcs {
+ struct phylink_pcs pcs;
+ struct mxl862xx_priv *priv;
+ int serdes_id;
+ int slot;
+ int if_mode;
+};
+
/**
* union mxl862xx_fw_version - firmware version for comparison and display
* @major: firmware major version
@@ -293,6 +312,8 @@ union mxl862xx_fw_version {
* flooding)
* @fw_version: cached firmware version, populated at probe and
* compared with MXL862XX_FW_VER_MIN()
+ * @serdes_ports: SerDes interfaces incl. sub-interfaces in case of
+ * 10G_QXGMII or QSGMII
* @ports: per-port state, indexed by switch port number
* @bridges: maps DSA bridge number to firmware bridge ID;
* zero means no firmware bridge allocated for that
@@ -311,6 +332,7 @@ struct mxl862xx_priv {
unsigned long flags;
u16 drop_meter;
union mxl862xx_fw_version fw_version;
+ struct mxl862xx_pcs serdes_ports[8];
struct mxl862xx_port ports[MXL862XX_MAX_PORTS];
u16 bridges[MXL862XX_MAX_BRIDGES + 1];
u16 evlan_ingress_size;
--
2.54.0