Re: [PATCH v4 linux-phy 0/3] phy: ti: add driver for TI DS125DF111 Dual-Channel Retimer

[Vinod Koul]

On Mon, 18 May 2026 17:20:23 +0300, Ioana Ciornei wrote:
> This patch set adds a generic PHY driver and the corresponding DT
> binding for the TI DS125DF111 Dual-Channel retimer. The datasheet on
> which this driver was based on can be found at -
> https://www.ti.com/lit/gpn/DS125DF111.
> 
> A separate generic PHY is registered for each of the two channels of the
> retimer, so consumers can drive each channel independently. This allows
> for independent control of the channels, which is especially important
> since each channel can be routed to different SerDes lanes and it is not
> guaranteed that the same retimer will do both directions of SerDes lane.
> 
> [...]

Applied, thanks!

[1/3] dt-bindings: phy: add PHY bindings for the TI DS125DF111 Retimer PHY
      commit: a62d9440ebbce3d9f0bd6c346a7fda2a53726850
[2/3] phy: ti: alphabetically sort Kconfig and Makefile
      commit: 711f64979e500799b27b33a8f030e2fd939fd07f
[3/3] phy: ti: add PHY driver for TI DS125DF111 Dual-Channel Retimer
      commit: 9bf5c16a6e63ebf2803deb32ba984a7fcf2c5ed7

Best regards,
-- 
~Vinod