[PATCH 2/3] arm64: dts: qcom: sm8750: Add CCI definitions

[Hangxiang Ma]

Qualcomm SM8750 SoC has three Camera Control Interface (CCI). Each
controller contains two I2C hosts.

Signed-off-by: Hangxiang Ma <hangxiang.ma@xxxxxxxxxxxxxxxx>
---
 arch/arm64/boot/dts/qcom/sm8750.dtsi | 282 +++++++++++++++++++++++++++++++++++
 1 file changed, 282 insertions(+)

diff --git a/arch/arm64/boot/dts/qcom/sm8750.dtsi b/arch/arm64/boot/dts/qcom/sm8750.dtsi
index 8ed3d8c791e3..7570189fdb5d 100644
--- a/arch/arm64/boot/dts/qcom/sm8750.dtsi
+++ b/arch/arm64/boot/dts/qcom/sm8750.dtsi
@@ -3032,6 +3032,96 @@ videocc: clock-controller@aaf0000 {
 			#power-domain-cells = <1>;
 		};
 
+		cci0: cci@ac7b000 {
+			compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac7b000 0x0 0x1000>;
+			interrupts = <GIC_SPI 426 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_0_CLK>;
+			clock-names = "ahb", "cci";
+			pinctrl-0 = <&cci0_0_default &cci0_1_default>;
+			pinctrl-1 = <&cci0_0_sleep &cci0_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci0_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci0_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci1: cci@ac7c000 {
+			compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac7c000 0x0 0x1000>;
+			interrupts = <GIC_SPI 427 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_1_CLK>;
+			clock-names = "ahb", "cci";
+			pinctrl-0 = <&cci1_0_default &cci1_1_default>;
+			pinctrl-1 = <&cci1_0_sleep &cci1_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci1_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci1_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
+		cci2: cci@ac7d000 {
+			compatible = "qcom,sm8750-cci", "qcom,msm8996-cci";
+			reg = <0x0 0x0ac7d000 0x0 0x1000>;
+			interrupts = <GIC_SPI 428 IRQ_TYPE_EDGE_RISING>;
+			power-domains = <&camcc CAM_CC_TITAN_TOP_GDSC>;
+			clocks = <&camcc CAM_CC_CAM_TOP_AHB_CLK>,
+				 <&camcc CAM_CC_CCI_2_CLK>;
+			clock-names = "ahb", "cci";
+			pinctrl-0 = <&cci2_0_default &cci2_1_default>;
+			pinctrl-1 = <&cci2_0_sleep &cci2_1_sleep>;
+			pinctrl-names = "default", "sleep";
+			status = "disabled";
+			#address-cells = <1>;
+			#size-cells = <0>;
+
+			cci2_i2c0: i2c-bus@0 {
+				reg = <0>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+
+			cci2_i2c1: i2c-bus@1 {
+				reg = <1>;
+				clock-frequency = <1000000>;
+				#address-cells = <1>;
+				#size-cells = <0>;
+			};
+		};
+
 		camss: isp@ad27000 {
 			compatible = "qcom,sm8750-camss";
 
@@ -3804,6 +3894,198 @@ tlmm: pinctrl@f100000 {
 			gpio-ranges = <&tlmm 0 0 216>;
 			wakeup-parent = <&pdc>;
 
+			cci0_0_default: cci0-0-default-state {
+				sda-pins {
+					pins = "gpio113";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio114";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_0_sleep: cci0-0-sleep-state {
+				sda-pins {
+					pins = "gpio113";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio114";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci0_1_default: cci0-1-default-state {
+				sda-pins {
+					pins = "gpio115";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio116";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci0_1_sleep: cci0-1-sleep-state {
+				sda-pins {
+					pins = "gpio115";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio116";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_0_default: cci1-0-default-state {
+				sda-pins {
+					pins = "gpio117";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio118";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci1_0_sleep: cci1-0-sleep-state {
+				sda-pins {
+					pins = "gpio117";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio118";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci1_1_default: cci1-1-default-state {
+				sda-pins {
+					pins = "gpio111";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio164";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci1_1_sleep: cci1-1-sleep-state {
+				sda-pins {
+					pins = "gpio111";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio164";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_0_default: cci2-0-default-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio153";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci2_0_sleep: cci2-0-sleep-state {
+				sda-pins {
+					pins = "gpio112";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio153";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
+			cci2_1_default: cci2-1-default-state {
+				sda-pins {
+					pins = "gpio119";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+
+				scl-pins {
+					pins = "gpio120";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-up;
+				};
+			};
+
+			cci2_1_sleep: cci2-1-sleep-state {
+				sda-pins {
+					pins = "gpio119";
+					function = "cci_i2c_sda";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+
+				scl-pins {
+					pins = "gpio120";
+					function = "cci_i2c_scl";
+					drive-strength = <2>;
+					bias-pull-down;
+				};
+			};
+
 			hub_i2c0_data_clk: hub-i2c0-data-clk-state {
 				/* SDA, SCL */
 				pins = "gpio64", "gpio65";

-- 
2.34.1