Re: [PATCH v6 1/2] usb: xhci-pci: add AMD Promontory 21 PCI glue

[Jihong Min]

On 5/19/26 05:30, Jihong Min wrote:
> It seems that these three functions above are everything that you truly
> want to add; the rest is boilerplate required by this two-module scheme
> to work, plus ID tables which must be duplicated and kept in sync.
>
> I wonder if a separate module is really justified, as opposed to simply
> linking this file into xhci_pci.ko when directed by Kconfig.
>
> The downside would be slightly higher memory usage on systems where the
> hwmon driver is enabled but not needed. OTOH, same systems would likely
> see reduced disk waste.

One clarification about this part:

In my previous reply I said that I could rework this either way depending on
the USB maintainer preference. After thinking about it again, I think the
current direction is the better one.

Mathias's earlier review pushed this series away from adding PROM21-specific
hwmon support directly into the common xhci-pci path. I agree with that
direction. The common xhci-pci driver should not grow PROM21-specific sensor
logic.

The current split keeps the PROM21-specific auxiliary-device lifetime
handling
in xhci-pci-prom21.c, keeps the hwmon implementation in drivers/hwmon, and
leaves xhci-pci.c with only the PCI ID handoff. That is also the closest
match
to the existing Renesas handoff approach.

So, while I previously phrased this as something I would leave entirely
to the
USB maintainers, my current preference is to keep the separate PROM21
PCI glue
driver unless Mathias or another USB maintainer specifically asks for a
different structure.


Sincerely,
Jihong Min