Re: [PATCH v3 01/10] ASoC: dt-bindings: renesas,fsi: add support multiple clocks

[Krzysztof Kozlowski]

On Sun, May 10, 2026 at 03:42:54PM +0700, phucduc.bui@xxxxxxxxx wrote:
> From: bui duc phuc <phucduc.bui@xxxxxxxxx>
> 
> The FSI on r8a7740 requires the SPU bus/bridge clock to be enabled before
> accessing its registers. Without this clock, any register access leads to

But why are you adding all these clocks to sh73a0 as well?

> a system hang as the FSI block sits behind the SPU bus.
> Update the binding to support multiple clocks to properly describe the
> hardware clock tree, including:
>   - SPU bus/bridge clock (spu) for register access.
>   - CPG DIV6 clocks (icka/b) as functional clock parents.

You do not need to add parents of clocks.

>   - FSI internal dividers (diva/b) for audio clock generation.

Internal dividers do not have representation. They are internal.

>   - External clock inputs (xcka/b) provided by the board.
> 
> Suggested-by: Geert Uytterhoeven <geert@xxxxxxxxxxxxxx>
> Signed-off-by: bui duc phuc <phucduc.bui@xxxxxxxxx>
> ---
>  .../bindings/sound/renesas,fsi.yaml           | 27 ++++++++++++++++++-
>  1 file changed, 26 insertions(+), 1 deletion(-)
> 
> diff --git a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> index df91991699a7..c50e7115b21a 100644
> --- a/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> +++ b/Documentation/devicetree/bindings/sound/renesas,fsi.yaml
> @@ -38,7 +38,32 @@ properties:
>      maxItems: 1
>  
>    clocks:
> -    maxItems: 1
> +    minItems: 1
> +    items:
> +      - description: Main FSI module clock
> +      - description: |
> +          SPU bus/bridge clock. On R8A7740, this clock must be enabled to allow
> +          register access as the FSI block is connected behind the SPU bus.
> +      - description: CPG DIV6 functional clocks for FSI port A
> +      - description: CPG DIV6 functional clocks for FSI port B
> +      - description: Internal FSI dividers for port A used for audio clock generation
> +      - description: Internal FSI dividers for port B used for audio clock generation
> +      - description: External clock inputs for FSI port A provided by the board
> +      - description: External clock inputs for FSI port B provided by the board
> +
> +  clock-names:
> +    minItems: 1
> +    maxItems: 8
> +    items:
> +      enum:

This cannot be flexible.

> +        - fck  # Main FSI module clock
> +        - spu  # optional SPU bus/bridge clock
> +        - icka # optional CPG DIV6 functional clocks for FSI port A
> +        - ickb # optional CPG DIV6 functional clocks for FSI port B
> +        - diva # optional Internal FSI dividers for port A used for audio clock generation
> +        - divb # optional Internal FSI dividers for port B used for audio clock generation
> +        - xcka # optional External clock inputs for FSI port A provided by the board
> +        - xckb # optional External clock inputs for FSI port B provided by the board

Best regards,
Krzysztof