[PATCH v7 7/8] PCI: of: Set fwnode device of newly created PCI device nodes

[Herve Codina]

Device-tree node can be created when CONFIG_PCI_DYNAMIC_OF_NODES. Those
nodes are created and filled based on PCI core information but the
fwnode device field is not set.

When later an overlay is applied, this confuses fw_devlink. Indeed,
without any device attached to the node, fw_devlink considers that this
node will never become a device. When this node is pointed as a
supplier, devlink looks at its ancestors in order to find a node with a
device that could be used as the supplier.

In the PCI use case, this leads to links that wrongly use the PCI root
bridge device as the supplier instead of the expected PCI device.

Setting the fwnode device to the device of the PCI device allows devlink
to use this device as a supplier and so, correct links are created.

Fixes: 407d1a51921e ("PCI: Create device tree node for bridge")
Cc: stable@xxxxxxxxxxxxxxx
Signed-off-by: Herve Codina <herve.codina@xxxxxxxxxxx>
Acked-by: Bjorn Helgaas <bhelgaas@xxxxxxxxxx>
---
 drivers/pci/of.c | 7 +++++++
 1 file changed, 7 insertions(+)

diff --git a/drivers/pci/of.c b/drivers/pci/of.c
index 7506208815a4..25fb02c3dc72 100644
--- a/drivers/pci/of.c
+++ b/drivers/pci/of.c
@@ -709,6 +709,13 @@ void of_pci_make_dev_node(struct pci_dev *pdev)
 	if (ret)
 		goto out_free_node;
 
+	/*
+	 * Set the fwnode device in order to have fw_devlink creating links
+	 * pointing to this PCI device instead of walking up to the PCI host
+	 * bridge.
+	 */
+	fw_devlink_set_device(&np->fwnode, &pdev->dev);
+
 	ret = of_changeset_apply(cset);
 	if (ret)
 		goto out_free_node;
-- 
2.54.0