[PATCH v3 3/4] ARM: pxa: pxa25x: attach software node to its target GPIO controller
From: Bartosz Golaszewski
Date: Thu Apr 30 2026 - 09:02:56 EST
Software node describing the GPIO controller for the pxa25x platforms is
currently "dangling" - it's not actually attached to the relevant
controller and doesn't allow real fwnode lookup. Attach it once it's
registered as a firmware node before adding the platform device.
Reviewed-by: Linus Walleij <linusw@xxxxxxxxxx>
Signed-off-by: Bartosz Golaszewski <bartosz.golaszewski@xxxxxxxxxxxxxxxx>
---
arch/arm/mach-pxa/pxa25x.c | 3 +++
1 file changed, 3 insertions(+)
diff --git a/arch/arm/mach-pxa/pxa25x.c b/arch/arm/mach-pxa/pxa25x.c
index 70509a5998142ec6b9c484e5f094751eda6db6cd..a4e878be004a09a6ee464c8f09e91be249a224b2 100644
--- a/arch/arm/mach-pxa/pxa25x.c
+++ b/arch/arm/mach-pxa/pxa25x.c
@@ -240,6 +240,9 @@ static int __init pxa25x_init(void)
if (!of_have_populated_dt()) {
software_node_register(&pxa2xx_gpiochip_node);
+ pxa25x_device_gpio.dev.fwnode = software_node_fwnode(
+ &pxa2xx_gpiochip_node);
+
pxa2xx_set_dmac_info(&pxa25x_dma_pdata);
ret = platform_add_devices(pxa25x_devices,
ARRAY_SIZE(pxa25x_devices));
--
2.47.3