[ 0.000000] Linux version 2.6.34-gentoo-r1 (root@c2stable) (gcc version 4.4.3 (Gentoo 4.4.3-r2 p1.2) ) #2 SMP PREEMPT Sat Jul 3 09:21:09 PDT 2010 [ 0.000000] Command line: root=/dev/md5 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e4000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 00000000bf780000 (usable) [ 0.000000] BIOS-e820: 00000000bf780000 - 00000000bf798000 (ACPI data) [ 0.000000] BIOS-e820: 00000000bf798000 - 00000000bf7dc000 (ACPI NVS) [ 0.000000] BIOS-e820: 00000000bf7dc000 - 00000000c0000000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] BIOS-e820: 0000000100000000 - 0000000340000000 (usable) [ 0.000000] NX (Execute Disable) protection: active [ 0.000000] DMI 2.5 present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working around it. [ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved) [ 0.000000] e820 update range: 0000000000000000 - 0000000000001000 (usable) ==> (reserved) [ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable) [ 0.000000] No AGP bridge found [ 0.000000] last_pfn = 0x340000 max_arch_pfn = 0x400000000 [ 0.000000] MTRR default type: uncachable [ 0.000000] MTRR fixed ranges enabled: [ 0.000000] 00000-9FFFF write-back [ 0.000000] A0000-BFFFF uncachable [ 0.000000] C0000-DFFFF write-protect [ 0.000000] E0000-E7FFF write-through [ 0.000000] E8000-FFFFF write-protect [ 0.000000] MTRR variable ranges enabled: [ 0.000000] 0 base 000000000 mask E00000000 write-back [ 0.000000] 1 base 200000000 mask F00000000 write-back [ 0.000000] 2 base 300000000 mask FC0000000 write-back [ 0.000000] 3 base 0C0000000 mask FC0000000 uncachable [ 0.000000] 4 base 0BF800000 mask FFF800000 uncachable [ 0.000000] 5 disabled [ 0.000000] 6 disabled [ 0.000000] 7 disabled [ 0.000000] 8 disabled [ 0.000000] 9 disabled [ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106 [ 0.000000] e820 update range: 00000000bf800000 - 0000000100000000 (usable) ==> (reserved) [ 0.000000] last_pfn = 0xbf780 max_arch_pfn = 0x400000000 [ 0.000000] initial memory mapped : 0 - 20000000 [ 0.000000] found SMP MP-table at [ffff8800000ff780] ff780 [ 0.000000] Using GB pages for direct mapping [ 0.000000] init_memory_mapping: 0000000000000000-00000000bf780000 [ 0.000000] 0000000000 - 0080000000 page 1G [ 0.000000] 0080000000 - 00bf600000 page 2M [ 0.000000] 00bf600000 - 00bf780000 page 4k [ 0.000000] kernel direct mapping tables up to bf780000 @ 12000-15000 [ 0.000000] init_memory_mapping: 0000000100000000-0000000340000000 [ 0.000000] 0100000000 - 0340000000 page 1G [ 0.000000] kernel direct mapping tables up to 340000000 @ 14000-15000 [ 0.000000] ACPI: RSDP 00000000000fb0c0 00014 (v00 ACPIAM) [ 0.000000] ACPI: RSDT 00000000bf780000 00040 (v01 012810 RSDT1341 20100128 MSFT 00000097) [ 0.000000] ACPI: FACP 00000000bf780200 00084 (v01 012810 FACP1341 20100128 MSFT 00000097) [ 0.000000] ACPI: DSDT 00000000bf7804b0 0D2BA (v01 A1088 A1088000 00000000 INTL 20060113) [ 0.000000] ACPI: FACS 00000000bf798000 00040 [ 0.000000] ACPI: APIC 00000000bf780390 000D8 (v01 012810 APIC1341 20100128 MSFT 00000097) [ 0.000000] ACPI: MCFG 00000000bf780470 0003C (v01 012810 OEMMCFG 20100128 MSFT 00000097) [ 0.000000] ACPI: OEMB 00000000bf798040 00072 (v01 012810 OEMB1341 20100128 MSFT 00000097) [ 0.000000] ACPI: HPET 00000000bf78f4b0 00038 (v01 012810 OEMHPET 20100128 MSFT 00000097) [ 0.000000] ACPI: OSFR 00000000bf78f4f0 000B0 (v01 012810 OEMOSFR 20100128 MSFT 00000097) [ 0.000000] ACPI: SSDT 00000000bf79ba40 00363 (v01 DpgPmm CpuPm 00000012 INTL 20060113) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] [ffffea0000000000-ffffea000b5fffff] PMD -> [ffff880002000000-ffff88000c7fffff] on node 0 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] DMA32 0x00001000 -> 0x00100000 [ 0.000000] Normal 0x00100000 -> 0x00340000 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[3] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x000bf780 [ 0.000000] 0: 0x00100000 -> 0x00340000 [ 0.000000] On node 0 totalpages: 3143439 [ 0.000000] DMA zone: 56 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3927 pages, LIFO batch:0 [ 0.000000] DMA32 zone: 14280 pages used for memmap [ 0.000000] DMA32 zone: 765880 pages, LIFO batch:31 [ 0.000000] Normal zone: 32256 pages used for memmap [ 0.000000] Normal zone: 2327040 pages, LIFO batch:31 [ 0.000000] ACPI: PM-Timer IO Port: 0x808 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x02] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x04] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x10] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x12] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x14] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x03] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x09] lapic_id[0x05] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0a] lapic_id[0x11] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0b] lapic_id[0x13] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0c] lapic_id[0x15] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0d] lapic_id[0x8c] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0e] lapic_id[0x8d] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x0f] lapic_id[0x8e] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x10] lapic_id[0x8f] disabled) [ 0.000000] ACPI: IOAPIC (id[0x06] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 6, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: IOAPIC (id[0x07] address[0xfec8a000] gsi_base[24]) [ 0.000000] IOAPIC[1]: apic_id 7, version 32, address 0xfec8a000, GSI 24-47 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] ACPI: HPET id: 0x8086a301 base: 0xfed00000 [ 0.000000] 16 Processors exceeds NR_CPUS limit of 12 [ 0.000000] SMP: Allowing 12 CPUs, 0 hotplug CPUs [ 0.000000] nr_irqs_gsi: 48 [ 0.000000] early_res array is doubled to 64 at [14000 - 147ff] [ 0.000000] Allocating PCI resources starting at c0000000 (gap: c0000000:3ee00000) [ 0.000000] setup_percpu: NR_CPUS:12 nr_cpumask_bits:12 nr_cpu_ids:12 nr_node_ids:1 [ 0.000000] PERCPU: Embedded 26 pages/cpu @ffff880001800000 s75176 r8192 d23128 u131072 [ 0.000000] pcpu-alloc: s75176 r8192 d23128 u131072 alloc=1*2097152 [ 0.000000] pcpu-alloc: [0] 00 01 02 03 04 05 06 07 08 09 10 11 -- -- -- -- [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 3096847 [ 0.000000] Kernel command line: root=/dev/md5 [ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes) [ 0.000000] Dentry cache hash table entries: 2097152 (order: 12, 16777216 bytes) [ 0.000000] early_res array is doubled to 128 at [14800 - 157ff] [ 0.000000] Inode-cache hash table entries: 1048576 (order: 11, 8388608 bytes) [ 0.000000] Checking aperture... [ 0.000000] No AGP bridge found [ 0.000000] Subtract (60 early reservations) [ 0.000000] #1 [0001000000 - 0001771244] TEXT DATA BSS [ 0.000000] #2 [0001772000 - 0001772298] BRK [ 0.000000] #3 [00000ff790 - 0000100000] BIOS reserved [ 0.000000] #4 [00000ff780 - 00000ff790] MP-table mpf [ 0.000000] #5 [000009fc00 - 00000f1310] BIOS reserved [ 0.000000] #6 [00000f14fc - 00000ff780] BIOS reserved [ 0.000000] #7 [00000f1310 - 00000f14fc] MP-table mpc [ 0.000000] #8 [0000010000 - 0000012000] TRAMPOLINE [ 0.000000] #9 [0000012000 - 0000014000] PGTABLE [ 0.000000] #10 [00017722c0 - 00017732c0] BOOTMEM [ 0.000000] #11 [0001771280 - 0001771880] BOOTMEM [ 0.000000] #12 [0001f74000 - 0001f75000] BOOTMEM [ 0.000000] #13 [0001f75000 - 0001f76000] BOOTMEM [ 0.000000] #14 [0002000000 - 000c800000] MEMMAP 0 [ 0.000000] #15 [0001771880 - 0001771a00] BOOTMEM [ 0.000000] #16 [00017732c0 - 000178b2c0] BOOTMEM [ 0.000000] #17 [000178b2c0 - 00017a32c0] BOOTMEM [ 0.000000] #18 [00017a4000 - 00017a5000] BOOTMEM [ 0.000000] #19 [0001771a00 - 0001771a41] BOOTMEM [ 0.000000] #20 [0001771a80 - 0001771b06] BOOTMEM [ 0.000000] #21 [0001771b40 - 0001771da8] BOOTMEM [ 0.000000] #22 [0001771dc0 - 0001771e28] BOOTMEM [ 0.000000] #23 [0001771e40 - 0001771ea8] BOOTMEM [ 0.000000] #24 [0001771ec0 - 0001771f28] BOOTMEM [ 0.000000] #25 [0001771f40 - 0001771fa8] BOOTMEM [ 0.000000] #26 [00017a32c0 - 00017a3328] BOOTMEM [ 0.000000] #27 [00017a3340 - 00017a33a8] BOOTMEM [ 0.000000] #28 [00017a33c0 - 00017a3428] BOOTMEM [ 0.000000] #29 [00017a3440 - 00017a34a8] BOOTMEM [ 0.000000] #30 [00017a34c0 - 00017a3528] BOOTMEM [ 0.000000] #31 [00017a3540 - 00017a35a8] BOOTMEM [ 0.000000] #32 [0001771fc0 - 0001771fce] BOOTMEM [ 0.000000] #33 [00017a35c0 - 00017a35ce] BOOTMEM [ 0.000000] #34 [0001800000 - 000181a000] BOOTMEM [ 0.000000] #35 [0001820000 - 000183a000] BOOTMEM [ 0.000000] #36 [0001840000 - 000185a000] BOOTMEM [ 0.000000] #37 [0001860000 - 000187a000] BOOTMEM [ 0.000000] #38 [0001880000 - 000189a000] BOOTMEM [ 0.000000] #39 [00018a0000 - 00018ba000] BOOTMEM [ 0.000000] #40 [00018c0000 - 00018da000] BOOTMEM [ 0.000000] #41 [00018e0000 - 00018fa000] BOOTMEM [ 0.000000] #42 [0001900000 - 000191a000] BOOTMEM [ 0.000000] #43 [0001920000 - 000193a000] BOOTMEM [ 0.000000] #44 [0001940000 - 000195a000] BOOTMEM [ 0.000000] #45 [0001960000 - 000197a000] BOOTMEM [ 0.000000] #46 [00017a3600 - 00017a3608] BOOTMEM [ 0.000000] #47 [00017a3640 - 00017a3648] BOOTMEM [ 0.000000] #48 [00017a3680 - 00017a36b0] BOOTMEM [ 0.000000] #49 [00017a36c0 - 00017a3720] BOOTMEM [ 0.000000] #50 [00017a3740 - 00017a3850] BOOTMEM [ 0.000000] #51 [00017a3880 - 00017a38c8] BOOTMEM [ 0.000000] #52 [00017a3900 - 00017a3948] BOOTMEM [ 0.000000] #53 [00017a5000 - 00017ad000] BOOTMEM [ 0.000000] #54 [000c800000 - 000d800000] BOOTMEM [ 0.000000] #55 [000d800000 - 000e000000] BOOTMEM [ 0.000000] #56 [000e000000 - 0012000000] BOOTMEM [ 0.000000] #57 [00017ad000 - 00017cd000] BOOTMEM [ 0.000000] #58 [000197a000 - 00019ba000] BOOTMEM [ 0.000000] #59 [0000015800 - 000001d800] BOOTMEM [ 0.000000] Memory: 12302060k/13631488k available (3665k kernel code, 1057732k absent, 271696k reserved, 2924k data, 476k init) [ 0.000000] Experimental preemptable hierarchical RCU implementation. [ 0.000000] NR_IRQS:640 [ 0.000000] Console: colour VGA+ 80x25 [ 0.000000] console [tty0] enabled [ 0.000000] hpet clockevent registered [ 0.000000] Fast TSC calibration using PIT [ 0.001000] Detected 3337.212 MHz processor. [ 0.000004] Calibrating delay loop (skipped), value calculated using timer frequency.. 6674.42 BogoMIPS (lpj=3337212) [ 0.000294] Security Framework initialized [ 0.000432] Mount-cache hash table entries: 256 [ 0.000638] CPU: Physical Processor ID: 0 [ 0.000763] CPU: Processor Core ID: 0 [ 0.000890] mce: CPU supports 9 MCE banks [ 0.001025] CPU0: Thermal monitoring enabled (TM1) [ 0.001158] using mwait in idle threads. [ 0.001290] Performance Events: Westmere events, Intel PMU driver. [ 0.001470] ... version: 3 [ 0.001594] ... bit width: 48 [ 0.001718] ... generic registers: 4 [ 0.001844] ... value mask: 0000ffffffffffff [ 0.001970] ... max period: 000000007fffffff [ 0.002097] ... fixed-purpose events: 3 [ 0.002228] ... event mask: 000000070000000f [ 0.002375] Freeing SMP alternatives: 36k freed [ 0.002505] ACPI: Core revision 20100121 [ 0.041981] Setting APIC routing to physical flat [ 0.042547] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.056632] CPU0: Intel(R) Core(TM) i7 CPU X 980 @ 3.33GHz stepping 02 [ 0.163788] Booting Node 0, Processors #1 #2 #3 #4 #5 #6 #7 #8 #9 #10 #11 Ok. [ 1.203984] Brought up 12 CPUs [ 1.204108] Total of 12 processors activated (81161.06 BogoMIPS). [ 1.210623] NET: Registered protocol family 16 [ 1.213504] ACPI: bus type pci registered [ 1.213685] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.213912] PCI: not using MMCONFIG [ 1.214036] PCI: Using configuration type 1 for base access [ 1.216086] bio: create slab at 0 [ 1.217404] ACPI: EC: Look up EC in DSDT [ 1.218519] ACPI: Executed 1 blocks of module-level executable AML code [ 1.298129] ACPI: SSDT 00000000bf7980c0 03978 (v01 DpgPmm P001Ist 00000011 INTL 20060113) [ 1.298954] ACPI: Interpreter enabled [ 1.299077] ACPI: (supports S0 S5) [ 1.299254] ACPI: Using IOAPIC for interrupt routing [ 1.299419] PCI: MMCONFIG for domain 0000 [bus 00-ff] at [mem 0xe0000000-0xefffffff] (base 0xe0000000) [ 1.301211] PCI: MMCONFIG at [mem 0xe0000000-0xefffffff] reserved in ACPI motherboard resources [ 1.330871] ACPI: No dock devices found. [ 1.330997] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug [ 1.331326] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 1.331673] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7] [ 1.331801] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff] [ 1.331930] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff] [ 1.332151] pci_root PNP0A08:00: host bridge window [mem 0x000d0000-0x000dffff] [ 1.332372] pci_root PNP0A08:00: host bridge window [mem 0xc0000000-0xdfffffff] [ 1.332596] pci_root PNP0A08:00: host bridge window [mem 0xf0000000-0xfed8ffff] [ 1.332859] pci 0000:00:00.0: PME# supported from D0 D3hot D3cold [ 1.332862] pci 0000:00:00.0: PME# disabled [ 1.332904] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold [ 1.332906] pci 0000:00:01.0: PME# disabled [ 1.332948] pci 0000:00:03.0: PME# supported from D0 D3hot D3cold [ 1.332951] pci 0000:00:03.0: PME# disabled [ 1.332994] pci 0000:00:07.0: PME# supported from D0 D3hot D3cold [ 1.332996] pci 0000:00:07.0: PME# disabled [ 1.333165] pci 0000:00:1a.0: reg 20: [io 0x9800-0x981f] [ 1.333217] pci 0000:00:1a.1: reg 20: [io 0x9880-0x989f] [ 1.333270] pci 0000:00:1a.2: reg 20: [io 0x9c00-0x9c1f] [ 1.333322] pci 0000:00:1a.7: reg 10: [mem 0xfb9ff000-0xfb9ff3ff] [ 1.333367] pci 0000:00:1a.7: PME# supported from D0 D3hot D3cold [ 1.333370] pci 0000:00:1a.7: PME# disabled [ 1.333397] pci 0000:00:1b.0: reg 10: [mem 0xfb9f8000-0xfb9fbfff 64bit] [ 1.333430] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold [ 1.333433] pci 0000:00:1b.0: PME# disabled [ 1.333483] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold [ 1.333486] pci 0000:00:1c.0: PME# disabled [ 1.333539] pci 0000:00:1c.2: PME# supported from D0 D3hot D3cold [ 1.333541] pci 0000:00:1c.2: PME# disabled [ 1.333596] pci 0000:00:1c.4: PME# supported from D0 D3hot D3cold [ 1.333599] pci 0000:00:1c.4: PME# disabled [ 1.333651] pci 0000:00:1c.5: PME# supported from D0 D3hot D3cold [ 1.333654] pci 0000:00:1c.5: PME# disabled [ 1.333693] pci 0000:00:1d.0: reg 20: [io 0x9080-0x909f] [ 1.333747] pci 0000:00:1d.1: reg 20: [io 0x9400-0x941f] [ 1.333799] pci 0000:00:1d.2: reg 20: [io 0x9480-0x949f] [ 1.333850] pci 0000:00:1d.7: reg 10: [mem 0xfb9fe000-0xfb9fe3ff] [ 1.333895] pci 0000:00:1d.7: PME# supported from D0 D3hot D3cold [ 1.333899] pci 0000:00:1d.7: PME# disabled [ 1.333993] pci 0000:00:1f.0: quirk: [io 0x0800-0x087f] claimed by ICH6 ACPI/GPIO/TCO [ 1.334216] pci 0000:00:1f.0: quirk: [io 0x0500-0x053f] claimed by ICH6 GPIO [ 1.334346] pci 0000:00:1f.0: ICH7 LPC Generic IO decode 1 PIO at 0294 (mask 0003) [ 1.334609] pci 0000:00:1f.2: reg 10: [io 0x8000-0x8007] [ 1.334613] pci 0000:00:1f.2: reg 14: [io 0x7c00-0x7c03] [ 1.334617] pci 0000:00:1f.2: reg 18: [io 0x7880-0x7887] [ 1.334621] pci 0000:00:1f.2: reg 1c: [io 0x7800-0x7803] [ 1.334625] pci 0000:00:1f.2: reg 20: [io 0x7480-0x748f] [ 1.334629] pci 0000:00:1f.2: reg 24: [io 0x7400-0x740f] [ 1.334665] pci 0000:00:1f.3: reg 10: [mem 0xfb9fd000-0xfb9fd0ff 64bit] [ 1.334675] pci 0000:00:1f.3: reg 20: [io 0x0400-0x041f] [ 1.334704] pci 0000:00:1f.5: reg 10: [io 0x9000-0x9007] [ 1.334708] pci 0000:00:1f.5: reg 14: [io 0x8c00-0x8c03] [ 1.334712] pci 0000:00:1f.5: reg 18: [io 0x8880-0x8887] [ 1.334716] pci 0000:00:1f.5: reg 1c: [io 0x8800-0x8803] [ 1.334721] pci 0000:00:1f.5: reg 20: [io 0x8480-0x848f] [ 1.334725] pci 0000:00:1f.5: reg 24: [io 0x8400-0x840f] [ 1.334774] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.334901] pci 0000:00:01.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.334904] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.334907] pci 0000:00:01.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.334934] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 1.335060] pci 0000:00:03.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.335063] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.335066] pci 0000:00:03.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.335107] pci 0000:03:00.0: reg 10: [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.335114] pci 0000:03:00.0: reg 18: [mem 0xfbac0000-0xfbadffff 64bit] [ 1.335118] pci 0000:03:00.0: reg 20: [io 0xa000-0xa0ff] [ 1.335124] pci 0000:03:00.0: reg 30: [mem 0xfbaa0000-0xfbabffff pref] [ 1.335138] pci 0000:03:00.0: supports D1 D2 [ 1.335160] pci 0000:03:00.1: reg 10: [mem 0xfbafc000-0xfbafffff 64bit] [ 1.335187] pci 0000:03:00.1: supports D1 D2 [ 1.335198] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 1.335324] pci 0000:00:07.0: bridge window [io 0xa000-0xafff] [ 1.335327] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.335330] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.335362] pci 0000:00:1c.0: PCI bridge to [bus 07-07] [ 1.335489] pci 0000:00:1c.0: bridge window [io 0xf000-0x0000] (disabled) [ 1.335492] pci 0000:00:1c.0: bridge window [mem 0xfff00000-0x000fffff] (disabled) [ 1.335496] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] [ 1.335561] pci 0000:06:00.0: reg 10: [mem 0xfbdfc000-0xfbdfffff 64bit] [ 1.335568] pci 0000:06:00.0: reg 18: [io 0xd800-0xd8ff] [ 1.335592] pci 0000:06:00.0: reg 30: [mem 0xfbdc0000-0xfbddffff pref] [ 1.335627] pci 0000:06:00.0: supports D1 D2 [ 1.335628] pci 0000:06:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.335632] pci 0000:06:00.0: PME# disabled [ 1.335642] pci 0000:00:1c.2: PCI bridge to [bus 06-06] [ 1.335769] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.335771] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] [ 1.335776] pci 0000:00:1c.2: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.335873] pci 0000:05:00.0: reg 24: [mem 0xfbcfe000-0xfbcfffff] [ 1.335907] pci 0000:05:00.0: PME# supported from D3hot [ 1.335911] pci 0000:05:00.0: PME# disabled [ 1.335951] pci 0000:05:00.1: reg 10: [io 0xcc00-0xcc07] [ 1.335958] pci 0000:05:00.1: reg 14: [io 0xc880-0xc883] [ 1.335965] pci 0000:05:00.1: reg 18: [io 0xc800-0xc807] [ 1.335973] pci 0000:05:00.1: reg 1c: [io 0xc480-0xc483] [ 1.335980] pci 0000:05:00.1: reg 20: [io 0xc400-0xc40f] [ 1.336033] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 1.336160] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 1.336162] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.336167] pci 0000:00:1c.4: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.336231] pci 0000:04:00.0: reg 10: [mem 0xfbbfc000-0xfbbfffff 64bit] [ 1.336238] pci 0000:04:00.0: reg 18: [io 0xb800-0xb8ff] [ 1.336260] pci 0000:04:00.0: reg 30: [mem 0xfbbc0000-0xfbbdffff pref] [ 1.336295] pci 0000:04:00.0: supports D1 D2 [ 1.336297] pci 0000:04:00.0: PME# supported from D0 D1 D2 D3hot D3cold [ 1.336300] pci 0000:04:00.0: PME# disabled [ 1.336310] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 1.336436] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff] [ 1.336439] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff] [ 1.336443] pci 0000:00:1c.5: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.336481] pci 0000:08:02.0: reg 10: [mem 0xfbeff000-0xfbeff7ff] [ 1.336487] pci 0000:08:02.0: reg 14: [io 0xec00-0xec7f] [ 1.336523] pci 0000:08:02.0: supports D2 [ 1.336525] pci 0000:08:02.0: PME# supported from D2 D3hot D3cold [ 1.336528] pci 0000:08:02.0: PME# disabled [ 1.336564] pci 0000:00:1e.0: PCI bridge to [bus 08-08] (subtractive decode) [ 1.336695] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 1.336698] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.336702] pci 0000:00:1e.0: bridge window [mem 0xfff00000-0x000fffff pref] (disabled) [ 1.336704] pci 0000:00:1e.0: bridge window [io 0x0000-0x0cf7] (subtractive decode) [ 1.336705] pci 0000:00:1e.0: bridge window [io 0x0d00-0xffff] (subtractive decode) [ 1.336707] pci 0000:00:1e.0: bridge window [mem 0x000a0000-0x000bffff] (subtractive decode) [ 1.336708] pci 0000:00:1e.0: bridge window [mem 0x000d0000-0x000dffff] (subtractive decode) [ 1.336710] pci 0000:00:1e.0: bridge window [mem 0xc0000000-0xdfffffff] (subtractive decode) [ 1.336711] pci 0000:00:1e.0: bridge window [mem 0xf0000000-0xfed8ffff] (subtractive decode) [ 1.336735] pci_bus 0000:00: on NUMA node 0 [ 1.336738] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 1.336969] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 1.337045] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P4._PRT] [ 1.337090] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P6._PRT] [ 1.337134] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P8._PRT] [ 1.337186] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P9._PRT] [ 1.337228] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE1._PRT] [ 1.337271] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE3._PRT] [ 1.337313] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.NPE7._PRT] [ 1.357707] ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 6 7 *10 11 12 14 15) [ 1.358191] ACPI: PCI Interrupt Link [LNKB] (IRQs *5) [ 1.358475] ACPI: PCI Interrupt Link [LNKC] (IRQs 3 4 6 7 10 *11 12 14 15) [ 1.358962] ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 6 7 10 11 12 *14 15) [ 1.359445] ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 6 7 10 11 12 14 *15) [ 1.359931] ACPI: PCI Interrupt Link [LNKF] (IRQs *3 4 6 7 10 11 12 14 15) [ 1.360413] ACPI: PCI Interrupt Link [LNKG] (IRQs 3 4 6 *7 10 11 12 14 15) [ 1.360898] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 *4 6 7 10 11 12 14 15) [ 1.361477] SCSI subsystem initialized [ 1.361710] libata version 3.00 loaded. [ 1.361793] usbcore: registered new interface driver usbfs [ 1.361936] usbcore: registered new interface driver hub [ 1.362084] usbcore: registered new device driver usb [ 1.362316] PCI: Using ACPI for IRQ routing [ 1.362441] PCI: pci_cache_line_size set to 64 bytes [ 1.362526] reserve RAM buffer: 000000000009fc00 - 000000000009ffff [ 1.362528] reserve RAM buffer: 00000000bf780000 - 00000000bfffffff [ 1.362598] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 [ 1.362847] hpet0: 4 comparators, 64-bit 14.318180 MHz counter [ 1.364985] Switching to clocksource tsc [ 1.365485] pnp: PnP ACPI init [ 1.365613] ACPI: bus type pnp registered [ 1.368146] pnp: PnP ACPI: found 17 devices [ 1.368270] ACPI: ACPI bus type pnp unregistered [ 1.368399] system 00:01: [mem 0xfbf00000-0xfbffffff] has been reserved [ 1.368527] system 00:01: [mem 0xfc000000-0xfcffffff] has been reserved [ 1.368658] system 00:01: [mem 0xfd000000-0xfdffffff] has been reserved [ 1.368786] system 00:01: [mem 0xfe000000-0xfebfffff] has been reserved [ 1.368914] system 00:01: [mem 0xfec8a000-0xfec8afff] could not be reserved [ 1.369041] system 00:01: [mem 0xfed10000-0xfed10fff] has been reserved [ 1.369171] system 00:07: [io 0x0290-0x029f] has been reserved [ 1.369299] system 00:08: [io 0x04d0-0x04d1] has been reserved [ 1.369426] system 00:08: [io 0x0800-0x087f] has been reserved [ 1.369553] system 00:08: [io 0x0500-0x057f] could not be reserved [ 1.369682] system 00:08: [mem 0xfed1c000-0xfed1ffff] has been reserved [ 1.369809] system 00:08: [mem 0xfed20000-0xfed3ffff] has been reserved [ 1.369936] system 00:08: [mem 0xfed40000-0xfed8ffff] has been reserved [ 1.370066] system 00:0b: [mem 0xffc00000-0xffdfffff] has been reserved [ 1.370195] system 00:0c: [mem 0xfec00000-0xfec00fff] could not be reserved [ 1.370323] system 00:0c: [mem 0xfee00000-0xfee00fff] has been reserved [ 1.370452] system 00:0f: [mem 0xe0000000-0xefffffff] has been reserved [ 1.370583] system 00:10: [mem 0x00000000-0x0009ffff] could not be reserved [ 1.370711] system 00:10: [mem 0x000c0000-0x000cffff] has been reserved [ 1.370839] system 00:10: [mem 0x000e0000-0x000fffff] could not be reserved [ 1.370967] system 00:10: [mem 0x00100000-0xbfffffff] could not be reserved [ 1.371095] system 00:10: [mem 0xfed90000-0xffffffff] could not be reserved [ 1.375812] pci 0000:00:1c.0: BAR 8: assigned [mem 0xc0000000-0xc03fffff] [ 1.375941] pci 0000:00:1c.2: BAR 9: assigned [mem 0xc0400000-0xc05fffff 64bit pref] [ 1.376162] pci 0000:00:1c.4: BAR 9: assigned [mem 0xc0600000-0xc07fffff 64bit pref] [ 1.376383] pci 0000:00:1c.5: BAR 9: assigned [mem 0xc0800000-0xc09fffff 64bit pref] [ 1.376606] pci 0000:00:1c.0: BAR 7: assigned [io 0x1000-0x1fff] [ 1.376733] pci 0000:00:01.0: PCI bridge to [bus 01-01] [ 1.376858] pci 0000:00:01.0: bridge window [io disabled] [ 1.376985] pci 0000:00:01.0: bridge window [mem disabled] [ 1.377111] pci 0000:00:01.0: bridge window [mem pref disabled] [ 1.377239] pci 0000:00:03.0: PCI bridge to [bus 02-02] [ 1.377364] pci 0000:00:03.0: bridge window [io disabled] [ 1.377491] pci 0000:00:03.0: bridge window [mem disabled] [ 1.377619] pci 0000:00:03.0: bridge window [mem pref disabled] [ 1.377748] pci 0000:00:07.0: PCI bridge to [bus 03-03] [ 1.377873] pci 0000:00:07.0: bridge window [io 0xa000-0xafff] [ 1.378002] pci 0000:00:07.0: bridge window [mem 0xfba00000-0xfbafffff] [ 1.378130] pci 0000:00:07.0: bridge window [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.378352] pci 0000:00:1c.0: PCI bridge to [bus 07-07] [ 1.378478] pci 0000:00:1c.0: bridge window [io 0x1000-0x1fff] [ 1.378608] pci 0000:00:1c.0: bridge window [mem 0xc0000000-0xc03fffff] [ 1.378737] pci 0000:00:1c.0: bridge window [mem 0xfaf00000-0xfaffffff 64bit pref] [ 1.378960] pci 0000:00:1c.2: PCI bridge to [bus 06-06] [ 1.379085] pci 0000:00:1c.2: bridge window [io 0xd000-0xdfff] [ 1.379214] pci 0000:00:1c.2: bridge window [mem 0xfbd00000-0xfbdfffff] [ 1.379342] pci 0000:00:1c.2: bridge window [mem 0xc0400000-0xc05fffff 64bit pref] [ 1.379568] pci 0000:00:1c.4: PCI bridge to [bus 05-05] [ 1.379694] pci 0000:00:1c.4: bridge window [io 0xc000-0xcfff] [ 1.379822] pci 0000:00:1c.4: bridge window [mem 0xfbc00000-0xfbcfffff] [ 1.379951] pci 0000:00:1c.4: bridge window [mem 0xc0600000-0xc07fffff 64bit pref] [ 1.380174] pci 0000:00:1c.5: PCI bridge to [bus 04-04] [ 1.380300] pci 0000:00:1c.5: bridge window [io 0xb000-0xbfff] [ 1.380428] pci 0000:00:1c.5: bridge window [mem 0xfbb00000-0xfbbfffff] [ 1.380559] pci 0000:00:1c.5: bridge window [mem 0xc0800000-0xc09fffff 64bit pref] [ 1.380783] pci 0000:00:1e.0: PCI bridge to [bus 08-08] [ 1.380908] pci 0000:00:1e.0: bridge window [io 0xe000-0xefff] [ 1.381037] pci 0000:00:1e.0: bridge window [mem 0xfbe00000-0xfbefffff] [ 1.381165] pci 0000:00:1e.0: bridge window [mem pref disabled] [ 1.381300] pci 0000:00:01.0: setting latency timer to 64 [ 1.381305] pci 0000:00:03.0: setting latency timer to 64 [ 1.381310] pci 0000:00:07.0: setting latency timer to 64 [ 1.381315] pci 0000:00:1c.0: enabling device (0106 -> 0107) [ 1.381444] pci 0000:00:1c.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.381575] pci 0000:00:1c.0: setting latency timer to 64 [ 1.381582] pci 0000:00:1c.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.381711] pci 0000:00:1c.2: setting latency timer to 64 [ 1.381716] pci 0000:00:1c.4: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 1.381845] pci 0000:00:1c.4: setting latency timer to 64 [ 1.381851] pci 0000:00:1c.5: PCI INT B -> GSI 16 (level, low) -> IRQ 16 [ 1.381980] pci 0000:00:1c.5: setting latency timer to 64 [ 1.381984] pci 0000:00:1e.0: setting latency timer to 64 [ 1.381987] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7] [ 1.381988] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff] [ 1.381989] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff] [ 1.381991] pci_bus 0000:00: resource 7 [mem 0x000d0000-0x000dffff] [ 1.381992] pci_bus 0000:00: resource 8 [mem 0xc0000000-0xdfffffff] [ 1.381993] pci_bus 0000:00: resource 9 [mem 0xf0000000-0xfed8ffff] [ 1.381995] pci_bus 0000:03: resource 0 [io 0xa000-0xafff] [ 1.381996] pci_bus 0000:03: resource 1 [mem 0xfba00000-0xfbafffff] [ 1.381997] pci_bus 0000:03: resource 2 [mem 0xd0000000-0xdfffffff 64bit pref] [ 1.381999] pci_bus 0000:07: resource 0 [io 0x1000-0x1fff] [ 1.382000] pci_bus 0000:07: resource 1 [mem 0xc0000000-0xc03fffff] [ 1.382001] pci_bus 0000:07: resource 2 [mem 0xfaf00000-0xfaffffff 64bit pref] [ 1.382002] pci_bus 0000:06: resource 0 [io 0xd000-0xdfff] [ 1.382004] pci_bus 0000:06: resource 1 [mem 0xfbd00000-0xfbdfffff] [ 1.382005] pci_bus 0000:06: resource 2 [mem 0xc0400000-0xc05fffff 64bit pref] [ 1.382006] pci_bus 0000:05: resource 0 [io 0xc000-0xcfff] [ 1.382007] pci_bus 0000:05: resource 1 [mem 0xfbc00000-0xfbcfffff] [ 1.382009] pci_bus 0000:05: resource 2 [mem 0xc0600000-0xc07fffff 64bit pref] [ 1.382010] pci_bus 0000:04: resource 0 [io 0xb000-0xbfff] [ 1.382011] pci_bus 0000:04: resource 1 [mem 0xfbb00000-0xfbbfffff] [ 1.382013] pci_bus 0000:04: resource 2 [mem 0xc0800000-0xc09fffff 64bit pref] [ 1.382014] pci_bus 0000:08: resource 0 [io 0xe000-0xefff] [ 1.382015] pci_bus 0000:08: resource 1 [mem 0xfbe00000-0xfbefffff] [ 1.382016] pci_bus 0000:08: resource 4 [io 0x0000-0x0cf7] [ 1.382018] pci_bus 0000:08: resource 5 [io 0x0d00-0xffff] [ 1.382019] pci_bus 0000:08: resource 6 [mem 0x000a0000-0x000bffff] [ 1.382020] pci_bus 0000:08: resource 7 [mem 0x000d0000-0x000dffff] [ 1.382021] pci_bus 0000:08: resource 8 [mem 0xc0000000-0xdfffffff] [ 1.382023] pci_bus 0000:08: resource 9 [mem 0xf0000000-0xfed8ffff] [ 1.382062] NET: Registered protocol family 2 [ 1.382235] IP route cache hash table entries: 524288 (order: 10, 4194304 bytes) [ 1.382910] TCP established hash table entries: 262144 (order: 10, 4194304 bytes) [ 1.383590] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes) [ 1.383820] TCP: Hash tables configured (established 262144 bind 65536) [ 1.383947] TCP reno registered [ 1.384071] UDP hash table entries: 8192 (order: 6, 262144 bytes) [ 1.384231] UDP-Lite hash table entries: 8192 (order: 6, 262144 bytes) [ 1.384472] NET: Registered protocol family 1 [ 1.384743] RPC: Registered udp transport module. [ 1.384867] RPC: Registered tcp transport module. [ 1.384991] RPC: Registered tcp NFSv4.1 backchannel transport module. [ 1.385253] pci 0000:03:00.0: Boot video device [ 1.385266] PCI: CLS 256 bytes, default 64 [ 1.385291] PCI-DMA: Using software bounce buffering for IO (SWIOTLB) [ 1.385419] Placing 64MB software IO TLB between ffff88000e000000 - ffff880012000000 [ 1.385642] software IO TLB at phys 0xe000000 - 0x12000000 [ 1.387859] VFS: Disk quotas dquot_6.5.2 [ 1.388001] Dquot-cache hash table entries: 512 (order 0, 4096 bytes) [ 1.388386] NTFS driver 2.1.29 [Flags: R/W]. [ 1.388551] fuse init (API version 7.13) [ 1.388724] msgmni has been set to 24027 [ 1.389042] alg: No test for stdrng (krng) [ 1.389194] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253) [ 1.389415] io scheduler noop registered [ 1.389540] io scheduler deadline registered [ 1.389678] io scheduler cfq registered (default) [ 1.389866] pcieport 0000:00:01.0: setting latency timer to 64 [ 1.389890] pcieport 0000:00:01.0: irq 48 for MSI/MSI-X [ 1.389952] pcieport 0000:00:03.0: setting latency timer to 64 [ 1.389974] pcieport 0000:00:03.0: irq 49 for MSI/MSI-X [ 1.390033] pcieport 0000:00:07.0: setting latency timer to 64 [ 1.390055] pcieport 0000:00:07.0: irq 50 for MSI/MSI-X [ 1.390116] pcieport 0000:00:1c.0: setting latency timer to 64 [ 1.390143] pcieport 0000:00:1c.0: irq 51 for MSI/MSI-X [ 1.390225] pcieport 0000:00:1c.2: setting latency timer to 64 [ 1.390252] pcieport 0000:00:1c.2: irq 52 for MSI/MSI-X [ 1.390332] pcieport 0000:00:1c.4: setting latency timer to 64 [ 1.390360] pcieport 0000:00:1c.4: irq 53 for MSI/MSI-X [ 1.390441] pcieport 0000:00:1c.5: setting latency timer to 64 [ 1.390469] pcieport 0000:00:1c.5: irq 54 for MSI/MSI-X [ 1.390569] aer 0000:00:01.0:pcie02: AER service couldn't init device: no _OSC support [ 1.390573] aer 0000:00:03.0:pcie02: AER service couldn't init device: no _OSC support [ 1.390576] aer 0000:00:07.0:pcie02: AER service couldn't init device: no _OSC support [ 1.392054] Non-volatile memory driver v1.3 [ 1.392268] input: Power Button as /devices/LNXSYSTM:00/LNXSYBUS:00/PNP0C0C:00/input/input0 [ 1.392495] ACPI: Power Button [PWRB] [ 1.392651] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input1 [ 1.392872] ACPI: Power Button [PWRF] [ 1.393495] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled [ 1.394749] brd: module loaded [ 1.395291] loop: module loaded [ 1.395415] Uniform Multi-Platform E-IDE driver [ 1.395570] ide-gd driver 1.18 [ 1.395812] ahci 0000:05:00.0: version 3.0 [ 1.395825] ahci 0000:05:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.406141] ahci 0000:05:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode [ 1.406373] ahci 0000:05:00.0: flags: 64bit ncq pm led clo pmp pio slum part [ 1.409133] ahci 0000:05:00.0: setting latency timer to 64 [ 1.409213] scsi0 : ahci [ 1.409412] scsi1 : ahci [ 1.409605] ata1: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe100 irq 16 [ 1.409827] ata2: SATA max UDMA/133 abar m8192@0xfbcfe000 port 0xfbcfe180 irq 16 [ 1.410087] ata_piix 0000:00:1f.2: version 2.13 [ 1.410096] ata_piix 0000:00:1f.2: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.410226] ata_piix 0000:00:1f.2: MAP [ P0 P2 P1 P3 ] [ 1.410496] ata_piix 0000:00:1f.2: setting latency timer to 64 [ 1.410527] scsi2 : ata_piix [ 1.410707] scsi3 : ata_piix [ 1.412084] ata3: SATA max UDMA/133 cmd 0x8000 ctl 0x7c00 bmdma 0x7480 irq 20 [ 1.412214] ata4: SATA max UDMA/133 cmd 0x7880 ctl 0x7800 bmdma 0x7488 irq 20 [ 1.412357] ata_piix 0000:00:1f.5: PCI INT B -> GSI 20 (level, low) -> IRQ 20 [ 1.412488] ata_piix 0000:00:1f.5: MAP [ P0 -- P1 -- ] [ 1.412754] ata_piix 0000:00:1f.5: setting latency timer to 64 [ 1.412774] scsi4 : ata_piix [ 1.412953] scsi5 : ata_piix [ 1.414137] ata5: SATA max UDMA/133 cmd 0x9000 ctl 0x8c00 bmdma 0x8480 irq 20 [ 1.414266] ata6: SATA max UDMA/133 cmd 0x8880 ctl 0x8800 bmdma 0x8488 irq 20 [ 1.414478] console [netcon0] enabled [ 1.414601] netconsole: network logging started [ 1.414782] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 1.414920] ehci_hcd 0000:00:1a.7: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.415055] ehci_hcd 0000:00:1a.7: setting latency timer to 64 [ 1.415057] ehci_hcd 0000:00:1a.7: EHCI Host Controller [ 1.415223] ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 1 [ 1.415463] ehci_hcd 0000:00:1a.7: debug port 1 [ 1.419459] ehci_hcd 0000:00:1a.7: cache line size of 256 is not supported [ 1.419468] ehci_hcd 0000:00:1a.7: irq 18, io mem 0xfb9ff000 [ 1.429052] ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00 [ 1.429198] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.429328] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.429548] usb usb1: Product: EHCI Host Controller [ 1.429672] usb usb1: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd [ 1.429799] usb usb1: SerialNumber: 0000:00:1a.7 [ 1.429993] hub 1-0:1.0: USB hub found [ 1.430118] hub 1-0:1.0: 6 ports detected [ 1.430281] ehci_hcd 0000:00:1d.7: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.430416] ehci_hcd 0000:00:1d.7: setting latency timer to 64 [ 1.430418] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 1.430575] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 2 [ 1.430811] ehci_hcd 0000:00:1d.7: debug port 1 [ 1.434798] ehci_hcd 0000:00:1d.7: cache line size of 256 is not supported [ 1.434807] ehci_hcd 0000:00:1d.7: irq 23, io mem 0xfb9fe000 [ 1.444011] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00 [ 1.444152] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002 [ 1.444281] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.444500] usb usb2: Product: EHCI Host Controller [ 1.444624] usb usb2: Manufacturer: Linux 2.6.34-gentoo-r1 ehci_hcd [ 1.444751] usb usb2: SerialNumber: 0000:00:1d.7 [ 1.444940] hub 2-0:1.0: USB hub found [ 1.445064] hub 2-0:1.0: 6 ports detected [ 1.445241] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 1.445389] uhci_hcd: USB Universal Host Controller Interface driver [ 1.445532] uhci_hcd 0000:00:1a.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 1.445662] uhci_hcd 0000:00:1a.0: setting latency timer to 64 [ 1.445664] uhci_hcd 0000:00:1a.0: UHCI Host Controller [ 1.445824] uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 3 [ 1.446063] uhci_hcd 0000:00:1a.0: irq 16, io base 0x00009800 [ 1.446210] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.446338] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.446558] usb usb3: Product: UHCI Host Controller [ 1.446682] usb usb3: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd [ 1.446808] usb usb3: SerialNumber: 0000:00:1a.0 [ 1.446999] hub 3-0:1.0: USB hub found [ 1.447124] hub 3-0:1.0: 2 ports detected [ 1.447278] uhci_hcd 0000:00:1a.1: PCI INT B -> GSI 21 (level, low) -> IRQ 21 [ 1.447409] uhci_hcd 0000:00:1a.1: setting latency timer to 64 [ 1.447411] uhci_hcd 0000:00:1a.1: UHCI Host Controller [ 1.447569] uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 4 [ 1.447813] uhci_hcd 0000:00:1a.1: irq 21, io base 0x00009880 [ 1.447956] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.448084] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.448306] usb usb4: Product: UHCI Host Controller [ 1.448431] usb usb4: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd [ 1.448558] usb usb4: SerialNumber: 0000:00:1a.1 [ 1.448746] hub 4-0:1.0: USB hub found [ 1.448871] hub 4-0:1.0: 2 ports detected [ 1.449022] uhci_hcd 0000:00:1a.2: PCI INT D -> GSI 19 (level, low) -> IRQ 19 [ 1.449152] uhci_hcd 0000:00:1a.2: setting latency timer to 64 [ 1.449154] uhci_hcd 0000:00:1a.2: UHCI Host Controller [ 1.449314] uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 5 [ 1.449559] uhci_hcd 0000:00:1a.2: irq 19, io base 0x00009c00 [ 1.449703] usb usb5: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.449830] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.450050] usb usb5: Product: UHCI Host Controller [ 1.450174] usb usb5: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd [ 1.450304] usb usb5: SerialNumber: 0000:00:1a.2 [ 1.450494] hub 5-0:1.0: USB hub found [ 1.450618] hub 5-0:1.0: 2 ports detected [ 1.450769] uhci_hcd 0000:00:1d.0: PCI INT A -> GSI 23 (level, low) -> IRQ 23 [ 1.450900] uhci_hcd 0000:00:1d.0: setting latency timer to 64 [ 1.450902] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 1.451059] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 [ 1.451300] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00009080 [ 1.451444] usb usb6: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.451571] usb usb6: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.451791] usb usb6: Product: UHCI Host Controller [ 1.451915] usb usb6: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd [ 1.452042] usb usb6: SerialNumber: 0000:00:1d.0 [ 1.452232] hub 6-0:1.0: USB hub found [ 1.452357] hub 6-0:1.0: 2 ports detected [ 1.452509] uhci_hcd 0000:00:1d.1: PCI INT B -> GSI 19 (level, low) -> IRQ 19 [ 1.452640] uhci_hcd 0000:00:1d.1: setting latency timer to 64 [ 1.452642] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 1.452798] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 [ 1.453038] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00009400 [ 1.453181] usb usb7: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.453312] usb usb7: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.453532] usb usb7: Product: UHCI Host Controller [ 1.453656] usb usb7: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd [ 1.453783] usb usb7: SerialNumber: 0000:00:1d.1 [ 1.453972] hub 7-0:1.0: USB hub found [ 1.454096] hub 7-0:1.0: 2 ports detected [ 1.454248] uhci_hcd 0000:00:1d.2: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 1.454379] uhci_hcd 0000:00:1d.2: setting latency timer to 64 [ 1.454381] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 1.454539] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 [ 1.454777] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00009480 [ 1.454921] usb usb8: New USB device found, idVendor=1d6b, idProduct=0001 [ 1.455049] usb usb8: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 1.455271] usb usb8: Product: UHCI Host Controller [ 1.455396] usb usb8: Manufacturer: Linux 2.6.34-gentoo-r1 uhci_hcd [ 1.455522] usb usb8: SerialNumber: 0000:00:1d.2 [ 1.455711] hub 8-0:1.0: USB hub found [ 1.455836] hub 8-0:1.0: 2 ports detected [ 1.456002] Initializing USB Mass Storage driver... [ 1.456164] usbcore: registered new interface driver usb-storage [ 1.456293] USB Mass Storage support registered. [ 1.456453] usbcore: registered new interface driver libusual [ 1.456631] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 1.458322] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 1.458450] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 1.458626] mice: PS/2 mouse device common for all mice [ 1.458854] i2c /dev entries driver [ 1.459019] md: raid0 personality registered for level 0 [ 1.459145] md: raid1 personality registered for level 1 [ 1.459360] device-mapper: ioctl: 4.17.0-ioctl (2010-03-05) initialised: dm-devel@redhat.com [ 1.459583] cpuidle: using governor ladder [ 1.459707] cpuidle: using governor menu [ 1.459946] usbcore: registered new interface driver hiddev [ 1.460098] usbcore: registered new interface driver usbhid [ 1.460224] usbhid: USB HID core driver [ 1.460505] TCP cubic registered [ 1.460628] NET: Registered protocol family 17 [ 1.461144] drivers/rtc/hctosys.c: unable to open rtc device (rtc0) [ 1.476326] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2 [ 1.713573] ata1: SATA link down (SStatus 0 SControl 300) [ 1.714364] ata2: SATA link down (SStatus 0 SControl 300) [ 2.048355] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 2.119150] ata4.01: link resume succeeded after 1 retries [ 2.119153] ata3.01: link resume succeeded after 1 retries [ 2.209179] usb 3-2: New USB device found, idVendor=051d, idProduct=0002 [ 2.209315] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [ 2.209444] usb 3-2: Product: Back-UPS BX1000G FW:869.L1 .D USB FW:L1 [ 2.209571] usb 3-2: Manufacturer: American Power Conversion [ 2.209698] usb 3-2: SerialNumber: 3B1007X44377 [ 2.231949] ata5: SATA link down (SStatus 0 SControl 301) [ 2.293060] generic-usb 0003:051D:0002.0001: hiddev96,hidraw0: USB HID v1.00 Device [American Power Conversion Back-UPS BX1000G FW:869.L1 .D USB FW:L1 ] on usb-0000:00:1a.0-2/input0 [ 2.359558] ata6: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.362760] ata6.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133 [ 2.362897] ata6.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.368768] ata6.00: configured for UDMA/133 [ 2.371534] ata3.00: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.371677] ata3.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.377564] ata3.00: ATAPI: Optiarc DVD RW AD-7241S, 1.03, max UDMA/100 [ 2.377855] ata3.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133 [ 2.377991] ata3.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.382475] ata4.00: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.382617] ata4.01: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 2.383553] ata3.00: configured for UDMA/100 [ 2.389713] ata3.01: configured for UDMA/133 [ 2.392540] ata4.00: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133 [ 2.392668] ata4.00: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.392982] ata4.01: ATA-8: WDC WD5002ABYS-02B1B0, 02.03B03, max UDMA/133 [ 2.393127] ata4.01: 976773168 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 2.393325] scsi 2:0:0:0: CD-ROM Optiarc DVD RW AD-7241S 1.03 PQ: 0 ANSI: 5 [ 2.397551] ata4.00: configured for UDMA/133 [ 2.400690] ata4.01: configured for UDMA/133 [ 2.403253] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray [ 2.403484] Uniform CD-ROM driver Revision: 3.20 [ 2.403680] sr 2:0:0:0: Attached scsi CD-ROM sr0 [ 2.403735] sr 2:0:0:0: Attached scsi generic sg0 type 5 [ 2.403929] scsi 2:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5 [ 2.404261] sd 2:0:1:0: [sda] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.404288] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 2.404362] scsi 3:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5 [ 2.404463] sd 3:0:0:0: [sdb] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.404488] sd 3:0:0:0: [sdb] Write Protect is off [ 2.404490] sd 3:0:0:0: [sdb] Mode Sense: 00 3a 00 00 [ 2.404498] sd 3:0:0:0: Attached scsi generic sg2 type 0 [ 2.404500] sd 3:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.404572] scsi 3:0:1:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5 [ 2.404577] sdb: [ 2.404696] sd 3:0:1:0: Attached scsi generic sg3 type 0 [ 2.404756] scsi 5:0:0:0: Direct-Access ATA WDC WD5002ABYS-0 02.0 PQ: 0 ANSI: 5 [ 2.404848] sd 5:0:0:0: [sdd] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.404872] sd 5:0:0:0: [sdd] Write Protect is off [ 2.404873] sd 5:0:0:0: [sdd] Mode Sense: 00 3a 00 00 [ 2.404883] sd 5:0:0:0: Attached scsi generic sg4 type 0 [ 2.404885] sd 5:0:0:0: [sdd] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.404949] sdd: [ 2.406959] sd 2:0:1:0: [sda] Write Protect is off [ 2.407200] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.407211] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.407499] sda: sdb1 sdb2 sdb3 sdb4 < sdd1 [ 2.409099] sd 5:0:0:0: [sdd] Attached SCSI disk [ 2.418507] sdb5 [ 2.418601] sd 3:0:1:0: [sdc] 976773168 512-byte logical blocks: (500 GB/465 GiB) [ 2.421379] sda1 sda2 sda3 sda4 < sda5 sdb6 > [ 2.439819] sda6 > [ 2.450321] sd 3:0:1:0: [sdc] Write Protect is off [ 2.450450] sd 3:0:1:0: [sdc] Mode Sense: 00 3a 00 00 [ 2.450469] sd 3:0:1:0: [sdc] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.450666] sd 3:0:0:0: [sdb] Attached SCSI disk [ 2.450892] sdc: [ 2.452759] sd 2:0:1:0: [sda] Attached SCSI disk [ 2.462946] sdc1 sdc2 sdc3 sdc4 < sdc5 sdc6 > [ 2.498109] usb 8-2: new low speed USB device using uhci_hcd and address 2 [ 2.501060] sd 3:0:1:0: [sdc] Attached SCSI disk [ 2.667691] usb 8-2: New USB device found, idVendor=045e, idProduct=0039 [ 2.667828] usb 8-2: New USB device strings: Mfr=1, Product=3, SerialNumber=0 [ 2.667956] usb 8-2: Product: Microsoft 5-Button Mouse with IntelliEye(TM) [ 2.668085] usb 8-2: Manufacturer: Microsoft [ 2.685797] input: Microsoft Microsoft 5-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:1d.2/usb8/8-2/8-2:1.0/input/input3 [ 2.686101] generic-usb 0003:045E:0039.0002: input,hidraw1: USB HID v1.10 Mouse [Microsoft Microsoft 5-Button Mouse with IntelliEye(TM)] on usb-0000:00:1d.2-2/input0 [ 4.579303] input: PS/2 Generic Mouse as /devices/platform/i8042/serio1/input/input4 [ 4.586802] md: Waiting for all devices to be available before autodetect [ 4.586938] md: If you don't use raid, use raid=noautodetect [ 4.587153] md: Autodetecting RAID arrays. [ 4.641503] md: Scanned 6 and added 6 devices. [ 4.641634] md: autorun ... [ 4.641756] md: considering sdc5 ... [ 4.641880] md: adding sdc5 ... [ 4.642003] md: sdc3 has different UUID to sdc5 [ 4.642129] md: adding sda5 ... [ 4.642254] md: sda3 has different UUID to sdc5 [ 4.642380] md: adding sdb5 ... [ 4.642503] md: sdb3 has different UUID to sdc5 [ 4.642709] md: created md5 [ 4.642831] md: bind [ 4.642956] md: bind [ 4.643081] md: bind [ 4.643208] md: running: [ 4.643502] raid1: raid set md5 active with 3 out of 3 mirrors [ 4.643640] md5: detected capacity change from 0 to 53694496768 [ 4.643787] md: considering sdc3 ... [ 4.643911] md: adding sdc3 ... [ 4.644034] md: adding sda3 ... [ 4.644158] md: adding sdb3 ... [ 4.644357] md: created md3 [ 4.644480] md: bind [ 4.644606] md: bind [ 4.644731] md: bind [ 4.644855] md: running: [ 4.645139] raid1: raid set md3 active with 3 out of 3 mirrors [ 4.645278] md3: detected capacity change from 0 to 53694562304 [ 4.645425] md: ... autorun DONE. [ 4.645580] md5: unknown partition table [ 4.688185] kjournald starting. Commit interval 5 seconds [ 4.688191] EXT3-fs (md5): mounted filesystem with writeback data mode [ 4.688201] VFS: Mounted root (ext3 filesystem) readonly on device 9:5. [ 4.688577] Freeing unused kernel memory: 476k freed [ 4.688757] Write protecting the kernel read-only data: 6144k [ 4.688963] Freeing unused kernel memory: 412k freed [ 4.689158] Freeing unused kernel memory: 224k freed [ 6.396275] udev: starting version 149 [ 6.499541] md3: [ 6.505089] rtc_cmos 00:03: RTC can wake from S4 [ 6.505120] rtc_cmos 00:03: rtc core: registered rtc_cmos as rtc0 [ 6.505143] rtc0: alarms up to one month, y3k, 114 bytes nvram, hpet irqs [ 6.507808] unknown partition table [ 6.590707] i801_smbus 0000:00:1f.3: PCI INT C -> GSI 18 (level, low) -> IRQ 18 [ 6.590710] ACPI: resource 0000:00:1f.3 [io 0x0400-0x041f] conflicts with ACPI region SMRG [io 0x0400-0x040f disabled] [ 6.590712] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver [ 6.696653] sky2: driver version 1.27 [ 6.696675] sky2 0000:06:00.0: PCI INT A -> GSI 18 (level, low) -> IRQ 18 [ 6.696686] sky2 0000:06:00.0: setting latency timer to 64 [ 6.696718] sky2 0000:06:00.0: Yukon-2 EC Ultra chip revision 3 [ 6.696803] sky2 0000:06:00.0: irq 55 for MSI/MSI-X [ 6.696973] sky2 0000:06:00.0: eth0: addr e0:cb:4e:97:7a:09 [ 6.696985] sky2 0000:04:00.0: PCI INT A -> GSI 17 (level, low) -> IRQ 17 [ 6.696992] sky2 0000:04:00.0: setting latency timer to 64 [ 6.697008] sky2 0000:04:00.0: Yukon-2 EC Ultra chip revision 3 [ 6.697088] sky2 0000:04:00.0: irq 56 for MSI/MSI-X [ 6.697244] sky2 0000:04:00.0: eth1: addr e0:cb:4e:97:80:fd [ 6.831794] Linux agpgart interface v0.103 [ 6.863019] [drm] Initialized drm 1.1.0 20060810 [ 7.069605] [drm] radeon defaulting to kernel modesetting. [ 7.069608] [drm] radeon kernel modesetting enabled. [ 7.069643] radeon 0000:03:00.0: PCI INT A -> GSI 30 (level, low) -> IRQ 30 [ 7.069646] radeon 0000:03:00.0: setting latency timer to 64 [ 7.070351] [drm] initializing kernel modesetting (JUNIPER 0x1002:0x68B8). [ 7.070992] [drm] register mmio base: 0xFBAC0000 [ 7.070994] [drm] register mmio size: 131072 [ 7.071060] ATOM BIOS: JUNIPER [ 7.071069] [drm] Clocks initialized ! [ 7.071070] [drm] 1 Power State(s) [ 7.071071] [drm] State 0 Default (default) [ 7.071072] [drm] 16 PCIE Lanes [ 7.071072] [drm] 1 Clock Mode(s) [ 7.071073] [drm] 0 engine/memory: 850000/1200000 [ 7.071078] [drm] radeon: power management initialized [ 7.071084] radeon 0000:03:00.0: VRAM: 256M 0x00000000 - 0x0FFFFFFF (256M used) [ 7.071086] radeon 0000:03:00.0: GTT: 512M 0x10000000 - 0x2FFFFFFF [ 7.071096] mtrr: type mismatch for d0000000,10000000 old: write-back new: write-combining [ 7.071097] [drm] Detected VRAM RAM=256M, BAR=256M [ 7.071098] [drm] RAM width 128bits DDR [ 7.071118] [TTM] Zone kernel: Available graphics memory: 6151604 kiB. [ 7.071119] [TTM] Zone dma32: Available graphics memory: 2097152 kiB. [ 7.071126] [drm] radeon: 256M of VRAM memory ready [ 7.071127] [drm] radeon: 512M of GTT memory ready. [ 7.072468] [drm] Radeon Display Connectors [ 7.072470] [drm] Connector 0: [ 7.072471] [drm] DisplayPort [ 7.072472] [drm] HPD4 [ 7.072474] [drm] DDC: 0x6440 0x6440 0x6444 0x6444 0x6448 0x6448 0x644c 0x644c [ 7.072476] [drm] Encoders: [ 7.072477] [drm] DFP1: INTERNAL_UNIPHY2 [ 7.072479] [drm] Connector 1: [ 7.072480] [drm] HDMI-A [ 7.072481] [drm] HPD5 [ 7.072483] [drm] DDC: 0x6430 0x6430 0x6434 0x6434 0x6438 0x6438 0x643c 0x643c [ 7.072484] [drm] Encoders: [ 7.072486] [drm] DFP2: INTERNAL_UNIPHY2 [ 7.072487] [drm] Connector 2: [ 7.072489] [drm] DVI-I [ 7.072490] [drm] HPD1 [ 7.072492] [drm] DDC: 0x6460 0x6460 0x6464 0x6464 0x6468 0x6468 0x646c 0x646c [ 7.072494] [drm] Encoders: [ 7.072495] [drm] DFP3: INTERNAL_UNIPHY1 [ 7.072496] [drm] CRT2: INTERNAL_KLDSCP_DAC2 [ 7.072498] [drm] Connector 3: [ 7.072499] [drm] DVI-I [ 7.072500] [drm] HPD6 [ 7.072502] [drm] DDC: 0x6450 0x6450 0x6454 0x6454 0x6458 0x6458 0x645c 0x645c [ 7.072504] [drm] Encoders: [ 7.072505] [drm] DFP4: INTERNAL_UNIPHY [ 7.072507] [drm] CRT1: INTERNAL_KLDSCP_DAC1 [ 7.123470] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 7.123512] HDA Intel 0000:00:1b.0: irq 57 for MSI/MSI-X [ 7.123534] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 7.422241] [drm] fb mappable at 0xD0040000 [ 7.422243] [drm] vram apper at 0xD0000000 [ 7.422244] [drm] size 8294400 [ 7.422245] [drm] fb depth is 24 [ 7.422246] [drm] pitch is 7680 [ 7.430854] Console: switching to colour frame buffer device 240x67 [ 7.434826] fb0: radeondrmfb frame buffer device [ 7.434827] registered panic notifier [ 7.434831] [drm] Initialized radeon 2.3.0 20080528 for 0000:03:00.0 on minor 0 [ 7.505452] hda_codec: AD1989B: BIOS auto-probing. [ 7.507737] HDA Intel 0000:03:00.1: PCI INT B -> GSI 37 (level, low) -> IRQ 37 [ 7.507780] HDA Intel 0000:03:00.1: irq 58 for MSI/MSI-X [ 7.507797] HDA Intel 0000:03:00.1: setting latency timer to 64 [ 8.961840] EXT3-fs (md5): using internal journal [ 9.253884] md: md11 stopped. [ 9.285670] md: bind [ 9.297473] md: md6 stopped. [ 9.299607] md: bind [ 9.301256] md: bind [ 9.301440] md: bind [ 9.301997] raid1: raid set md6 active with 3 out of 3 mirrors [ 9.302009] md6: detected capacity change from 0 to 253354939392 [ 9.302482] md6: unknown partition table [ 9.707338] EXT3-fs (md11): error: unable to read superblock [ 9.738406] kjournald starting. Commit interval 5 seconds [ 9.738410] EXT3-fs (md6): warning: maximal mount count reached, running e2fsck is recommended [ 9.764247] EXT3-fs (md6): using internal journal [ 9.764252] EXT3-fs (md6): mounted filesystem with writeback data mode [ 9.833944] Adding 4200992k swap on /dev/sda2. Priority:-1 extents:1 across:4200992k [ 9.835227] Adding 4200992k swap on /dev/sdb2. Priority:-2 extents:1 across:4200992k [ 9.849174] Adding 4200992k swap on /dev/sdc2. Priority:-3 extents:1 across:4200992k [ 15.188746] sky2 0000:06:00.0: eth0: enabling interface [ 17.142821] sky2 0000:06:00.0: eth0: Link is up at 100 Mbps, full duplex, flow control both [ 23.699296] NET: Registered protocol family 10 [ 26.019554] /dev/vmmon[4167]: Module vmmon: registered with major=10 minor=165 [ 26.019563] /dev/vmmon[4167]: Initial HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 26.019568] /dev/vmmon[4167]: HV check: anyNotCapable=0 anyUnlocked=0 anyEnabled=1 anyDisabled=0 [ 26.019570] /dev/vmmon[4167]: Module vmmon: initialized [ 26.091421] /dev/vmci[4186]: VMCI: Driver initialized. [ 26.091442] /dev/vmci[4186]: Module vmci: registered with major=10 minor=59 [ 26.091444] /dev/vmci[4186]: Module vmci: initialized [ 26.380369] /dev/vmnet: open called by PID 4268 (vmnet-bridge) [ 26.380376] /dev/vmnet: hub 0 does not exist, allocating memory. [ 26.380395] /dev/vmnet: port on hub 0 successfully opened [ 26.380406] bridge-eth0: up [ 26.380408] bridge-eth0: attached [ 27.590868] /dev/vmnet: open called by PID 4275 (vmnet-dhcpd) [ 27.590873] /dev/vmnet: hub 1 does not exist, allocating memory. [ 27.590892] /dev/vmnet: port on hub 1 successfully opened [ 27.656431] /dev/vmnet: open called by PID 4277 (vmnet-netifup) [ 27.656440] /dev/vmnet: port on hub 1 successfully opened [ 27.696350] /dev/vmnet: open called by PID 4280 (vmnet-dhcpd) [ 27.696355] /dev/vmnet: hub 8 does not exist, allocating memory. [ 27.696374] /dev/vmnet: port on hub 8 successfully opened [ 27.804340] /dev/vmnet: open called by PID 4284 (vmnet-natd) [ 27.804346] /dev/vmnet: port on hub 8 successfully opened [ 27.809048] /dev/vmnet: open called by PID 4285 (vmnet-netifup) [ 27.809055] /dev/vmnet: port on hub 8 successfully opened [ 34.300792] eth0: no IPv6 routers present [ 38.088802] vmnet8: no IPv6 routers present [ 38.385003] vmnet1: no IPv6 routers present