[ 0.000000] Linux version 2.6.26-rc6-00082-g4becd8d (root@unix) (gcc version 4.2.3 (Debian 4.2.3-3)) #8 SMP Thu Jun 19 18:06:43 UTC 2008 [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009fc00 (usable) [ 0.000000] BIOS-e820: 000000000009fc00 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003f0ea000 (usable) [ 0.000000] BIOS-e820: 000000003f0ea000 - 000000003f2eb000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003f2eb000 - 000000003febe000 (ACPI data) [ 0.000000] BIOS-e820: 000000003febe000 - 000000003feef000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003feef000 - 000000003ff00000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ff00000 - 0000000040000000 (reserved) [ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fed14000 - 00000000fed1a000 (reserved) [ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved) [ 0.000000] BIOS-e820: 00000000ffe00000 - 0000000100000000 (reserved) [ 0.000000] 112MB HIGHMEM available. [ 0.000000] 896MB LOWMEM available. [ 0.000000] Entering add_active_range(0, 0, 258282) 0 entries of 256 used [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0 -> 4096 [ 0.000000] Normal 4096 -> 229376 [ 0.000000] HighMem 229376 -> 258282 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[1] active PFN ranges [ 0.000000] 0: 0 -> 258282 [ 0.000000] On node 0 totalpages: 258282 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 4064 pages, LIFO batch:0 [ 0.000000] Normal zone: 1760 pages used for memmap [ 0.000000] Normal zone: 223520 pages, LIFO batch:31 [ 0.000000] HighMem zone: 226 pages used for memmap [ 0.000000] HighMem zone: 28680 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] DMI 2.4 present. [ 0.000000] Using APIC driver default [ 0.000000] ACPI: RSDP 000FE020, 0024 (r2 APPLE ) [ 0.000000] ACPI: XSDT 3FEFD1C0, 0074 (r1 APPLE Apple00 A5 1000013) [ 0.000000] ACPI: FACP 3FEFB000, 00F4 (r3 APPLE Apple00 A5 Loki 5F) [ 0.000000] ACPI: DSDT 3FEF0000, 48D1 (r1 APPLE MacBookP 20002 INTL 20050309) [ 0.000000] ACPI: FACS 3FEC0000, 0040 [ 0.000000] ACPI: HPET 3FEFA000, 0038 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: APIC 3FEF9000, 0068 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: MCFG 3FEF8000, 003C (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ASF! 3FEF7000, 00A0 (r32 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SBST 3FEF6000, 0030 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: ECDT 3FEF5000, 0053 (r1 APPLE Apple00 1 Loki 5F) [ 0.000000] ACPI: SSDT 3FEEF000, 04DC (r1 APPLE CpuPm 3000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBD000, 064F (r1 SataRe SataPri 1000 INTL 20050309) [ 0.000000] ACPI: SSDT 3FEBC000, 069C (r1 SataRe SataSec 1000 INTL 20050309) [ 0.000000] ACPI: DMI detected: Apple [ 0.000000] ACPI: PM-Timer IO Port: 0x408 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x01] enabled) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x00] high edge lint[0x1]) [ 0.000000] ACPI: LAPIC_NMI (acpi_id[0x01] high edge lint[0x1]) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 32, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: IRQ0 used by override. [ 0.000000] ACPI: IRQ2 used by override. [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000 [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] Allocating PCI resources starting at 50000000 (gap: 40000000:b0000000) [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000 [ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000 [ 0.000000] SMP: Allowing 2 CPUs, 0 hotplug CPUs [ 0.000000] PERCPU: Allocating 46760 bytes of per cpu data [ 0.000000] NR_CPUS: 2, nr_cpu_ids: 2 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 256264 [ 0.000000] Kernel command line: root=/dev/sda1 ro quiet splash vga=773 selinux=1 audit=1 enforcing=1 debug acpi_osi=Linux pnpacpi=off pci=routeirq usbcore.autosuspend=1 nmi_watchdog=0 [ 0.000000] audit: enabled (after initialization) [ 0.000000] ACPI: Added _OSI(Linux) [ 0.000000] mapped APIC to ffffb000 (fee00000) [ 0.000000] mapped IOAPIC to ffffa000 (fec00000) [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Extended CMOS year: 2000 [ 0.000000] Detected 2161.299 MHz processor. [ 0.010000] Console: colour dummy device 80x25 [ 0.010000] console [tty0] enabled [ 0.010000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.010000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.010000] Memory: 1018620k/1033128k available (2588k kernel code, 13892k reserved, 1338k data, 332k init, 115624k highmem) [ 0.010000] virtual kernel memory layout: [ 0.010000] fixmap : 0xfff7e000 - 0xfffff000 ( 516 kB) [ 0.010000] pkmap : 0xff800000 - 0xffc00000 (4096 kB) [ 0.010000] vmalloc : 0xf8800000 - 0xff7fe000 ( 111 MB) [ 0.010000] lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) [ 0.010000] .init : 0xc04db000 - 0xc052e000 ( 332 kB) [ 0.010000] .data : 0xc0387311 - 0xc04d5dac (1338 kB) [ 0.010000] .text : 0xc0100000 - 0xc0387311 (2588 kB) [ 0.010000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.010000] CPA: page pool initialized 1 of 1 pages preallocated [ 0.010000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=2, Nodes=1 [ 0.010000] hpet clockevent registered [ 0.159749] Calibrating delay using timer specific routine.. 4326.65 BogoMIPS (lpj=21633258) [ 0.159797] Security Framework initialized [ 0.159804] SELinux: Initializing. [ 0.159816] SELinux: Starting in enforcing mode [ 0.159822] selinux_register_security: Registering secondary module capability [ 0.159827] Capability LSM initialized as secondary [ 0.159851] Mount-cache hash table entries: 512 [ 0.160000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.160000] CPU: L2 cache: 4096K [ 0.160000] CPU: Physical Processor ID: 0 [ 0.160000] CPU: Processor Core ID: 0 [ 0.160000] Intel machine check architecture supported. [ 0.160000] Intel machine check reporting enabled on CPU#0. [ 0.160000] using mwait in idle threads. [ 0.160000] Checking 'hlt' instruction... OK. [ 0.200000] ACPI: Core revision 20080321 [ 0.210000] ENABLING IO-APIC IRQs [ 0.210000] ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 [ 0.309939] CPU0: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.310000] Booting processor 1/1 ip 6000 [ 0.320000] Initializing CPU#1 [ 0.320000] Calibrating delay using timer specific routine.. 4322.52 BogoMIPS (lpj=21612632) [ 0.320000] CPU: L1 I cache: 32K, L1 D cache: 32K [ 0.320000] CPU: L2 cache: 4096K [ 0.320000] CPU: Physical Processor ID: 0 [ 0.320000] CPU: Processor Core ID: 1 [ 0.320000] Intel machine check architecture supported. [ 0.320000] Intel machine check reporting enabled on CPU#1. [ 0.470000] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 0.470000] checking TSC synchronization [CPU#0 -> CPU#1]: passed. [ 0.470030] Brought up 2 CPUs [ 0.470035] Total of 2 processors activated (8649.17 BogoMIPS). [ 0.470058] CPU0 attaching sched-domain: [ 0.470063] domain 0: span 0-1 [ 0.470067] groups: 0 1 [ 0.470075] CPU1 attaching sched-domain: [ 0.470079] domain 0: span 0-1 [ 0.470082] groups: 1 0 [ 0.480000] net_namespace: 516 bytes [ 0.480000] Booting paravirtualized kernel on bare hardware [ 0.480000] NET: Registered protocol family 16 [ 0.480000] No dock devices found. [ 0.480000] EISA bus registered [ 0.480000] ACPI: bus type pci registered [ 0.480000] PCI: Using configuration type 1 for base access [ 0.480000] Setting up standard PCI resources [ 0.480000] ACPI: EC: EC description table is found, configuring boot EC [ 0.480000] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 0.497048] ACPI: BIOS _OSI(Linux) query honored via cmdline [ 0.497906] ACPI: Interpreter enabled [ 0.497911] ACPI: (supports S0 S3 S4 S5) [ 0.497971] ACPI: Using IOAPIC for interrupt routing [ 0.524861] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62 [ 0.524867] ACPI: EC: driver started in interrupt mode [ 0.525697] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.528201] pci 0000:00:1f.0: quirk: region 0400-047f claimed by ICH6 ACPI/GPIO/TCO [ 0.528209] pci 0000:00:1f.0: quirk: region 0500-053f claimed by ICH6 GPIO [ 0.529202] PCI: Transparent bridge - 0000:00:1e.0 [ 0.529254] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.530000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEGP._PRT] [ 0.530000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT] [ 0.530000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT] [ 0.530000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP03._PRT] [ 0.530000] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PCIB._PRT] [ 0.550000] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.550000] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.550000] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 7 10 12 14 15) *11 [ 0.550000] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 7 *11 12 14 15) [ 0.550000] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 7 10 12 14 15) *0, disabled. [ 0.550000] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 7 11 12 14 15) *0, disabled. [ 0.550000] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 7 *10 12 14 15) [ 0.550000] ACPI: PCI Interrupt Link [LNKH] (IRQs 3 4 5 6 7 *11 12 14 15) [ 0.550000] Linux Plug and Play Support v0.97 (c) Adam Belay [ 0.550000] pnp: PnP ACPI: disabled [ 0.550000] SCSI subsystem initialized [ 0.550000] libata version 3.00 loaded. [ 0.560000] usbcore: registered new interface driver usbfs [ 0.560000] usbcore: registered new interface driver hub [ 0.560000] usbcore: registered new device driver usb [ 0.560000] PCI: Using ACPI for IRQ routing [ 0.560000] PCI: Routing PCI interrupts for all devices because "pci=routeirq" specified [ 0.560000] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.560000] ACPI: PCI Interrupt 0000:00:07.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.560000] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 0.560000] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.560000] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.560000] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.560000] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 0.560000] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.560000] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.560000] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 0.560000] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 0.560000] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.560000] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.560000] ACPI: PCI Interrupt 0000:00:1f.3[B] -> GSI 19 (level, low) -> IRQ 19 [ 0.560000] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.560000] ACPI: PCI Interrupt 0000:02:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.560000] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.560000] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 0.589877] NetLabel: Initializing [ 0.589882] NetLabel: domain hash size = 128 [ 0.589885] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.589953] NetLabel: unlabeled traffic allowed by default [ 0.589964] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0 [ 0.589971] hpet0: 3 64-bit timers, 14318180 Hz [ 0.598808] Switched to high resolution mode on CPU 0 [ 0.600753] Switched to high resolution mode on CPU 1 [ 0.633768] PCI: Bridge: 0000:00:01.0 [ 0.633773] IO window: 3000-3fff [ 0.633779] MEM window: 0x50300000-0x503fffff [ 0.633784] PREFETCH window: 0x0000000040000000-0x0000000047ffffff [ 0.633792] PCI: Bridge: 0000:00:1c.0 [ 0.633798] IO window: 2000-2fff [ 0.633805] MEM window: 0x50200000-0x502fffff [ 0.633812] PREFETCH window: 0x0000000050500000-0x00000000505fffff [ 0.633822] PCI: Bridge: 0000:00:1c.1 [ 0.633825] IO window: disabled. [ 0.633833] MEM window: 0x50100000-0x501fffff [ 0.633839] PREFETCH window: disabled. [ 0.633848] PCI: Bridge: 0000:00:1c.2 [ 0.633853] IO window: 1000-1fff [ 0.633861] MEM window: 0x4c100000-0x500fffff [ 0.633867] PREFETCH window: 0x0000000048000000-0x000000004bffffff [ 0.633877] PCI: Bridge: 0000:00:1e.0 [ 0.633881] IO window: disabled. [ 0.633888] MEM window: 0x4c000000-0x4c0fffff [ 0.633894] PREFETCH window: disabled. [ 0.633914] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 0.633923] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 0.633950] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 0.633959] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 0.633987] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 0.633996] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 0.634024] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 0.634033] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 0.634050] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 0.634067] NET: Registered protocol family 2 [ 0.662571] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.662854] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.663275] TCP bind hash table entries: 65536 (order: 8, 1310720 bytes) [ 0.663831] TCP: Hash tables configured (established 131072 bind 65536) [ 0.663836] TCP reno registered [ 0.672632] NET: Registered protocol family 1 [ 0.682504] IA-32 Microcode Update Driver: v1.14a [ 0.692501] Initializing RT-Tester: OK [ 0.692501] audit: initializing netlink socket (enabled) [ 0.692501] type=2000 audit(1213898961.670:1): initialized [ 0.692501] highmem bounce pool size: 64 pages [ 0.692501] Total HugeTLB memory allocated, 0 [ 0.712501] fuse init (API version 7.9) [ 0.712501] msgmni has been set to 1764 [ 0.712501] SELinux: Registering netfilter hooks [ 0.712501] io scheduler noop registered [ 0.712501] io scheduler cfq registered (default) [ 0.712501] pci 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x1010 [ 0.712501] pci 0000:00:1d.0: Performing full reset [ 0.712501] pci 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.712501] pci 0000:00:1d.1: Performing full reset [ 0.712501] pci 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.712501] pci 0000:00:1d.2: Performing full reset [ 0.712501] pci 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x0010 [ 0.712501] pci 0000:00:1d.3: Performing full reset [ 0.712501] pci 0000:01:00.0: Boot video device [ 0.712501] vesafb: framebuffer at 0x40000000, mapped to 0xf8880000, using 1536k, total 16384k [ 0.712501] vesafb: mode is 1024x768x8, linelength=1024, pages=18 [ 0.712501] vesafb: protected mode interface info at c000:ad0c [ 0.712501] vesafb: pmi: set display start = c00cad94, set palette = c00cae50 [ 0.712501] vesafb: scrolling: redraw [ 0.712501] vesafb: Pseudocolor: size=8:8:8:8, shift=0:0:0:0 [ 0.722501] Console: switching to colour frame buffer device 128x48 [ 0.732502] fb0: VESA VGA frame buffer device [ 0.732502] power_supply ADP1: uevent [ 0.732502] power_supply ADP1: No power supply yet [ 0.732502] power_supply ADP1: power_supply_changed [ 0.732502] ACPI: AC Adapter [ADP1] (on-line) [ 0.732502] power_supply ADP1: power_supply_changed_work [ 0.732502] power_supply ADP1: power_supply_update_gen_leds 1 [ 0.732502] power_supply ADP1: uevent [ 0.732502] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 0.732631] power_supply ADP1: Static prop TYPE=Mains [ 0.732760] power_supply ADP1: 1 dynamic props [ 0.732873] power_supply ADP1: prop ONLINE=1 [ 0.849894] power_supply BAT0: uevent [ 0.849894] power_supply BAT0: No power supply yet [ 0.849895] power_supply BAT0: power_supply_changed [ 0.849895] power_supply BAT0: power_supply_changed_work [ 0.891894] ACPI: Battery Slot [BAT0] (battery present) [ 0.909880] hpet_resources: 0xfed00000 is busy [ 0.920026] loop: module loaded [ 0.920038] Linux video capture interface: v2.00 [ 0.933961] input: Macintosh mouse button emulation as /class/input/input0 [ 0.935137] Driver 'sd' needs updating - please use bus_type methods [ 0.935137] Driver 'sr' needs updating - please use bus_type methods [ 0.943265] ata_piix 0000:00:1f.1: version 2.12 [ 0.943265] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 0.947407] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 0.948261] power_supply BAT0: power_supply_update_bat_leds 4 [ 0.948277] power_supply BAT0: uevent [ 0.948278] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 0.948284] power_supply BAT0: Static prop TYPE=Battery [ 0.948287] power_supply BAT0: 12 dynamic props [ 0.948289] power_supply BAT0: prop STATUS=Full [ 0.948292] power_supply BAT0: prop PRESENT=1 [ 0.948295] power_supply BAT0: prop TECHNOLOGY=Unknown [ 0.948298] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 0.948301] power_supply BAT0: prop VOLTAGE_NOW=12524000 [ 0.948304] power_supply BAT0: prop CURRENT_NOW=0 [ 0.948307] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 0.948310] power_supply BAT0: prop ENERGY_FULL=53070000 [ 0.948313] power_supply BAT0: prop ENERGY_NOW=52350000 [ 0.948316] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 0.948319] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 0.948322] power_supply BAT0: prop SERIAL_NUMBER= [ 1.011821] scsi0 : ata_piix [ 1.016279] scsi1 : ata_piix [ 1.017705] ata1: PATA max UDMA/100 cmd 0x1f0 ctl 0x3f6 bmdma 0x40b0 irq 14 [ 1.017708] ata2: PATA max UDMA/100 cmd 0x170 ctl 0x376 bmdma 0x40b8 irq 15 [ 1.196055] ata1.00: ATAPI: MATSHITADVD-R UJ-857D, KCV9, max UDMA/66 [ 1.235992] ata1.00: configured for UDMA/66 [ 1.407024] scsi 0:0:0:0: CD-ROM MATSHITA DVD-R UJ-857D KCV9 PQ: 0 ANSI: 5 [ 1.416871] sr0: scsi3-mmc drive: 24x/24x writer cd/rw xa/form2 cdda tray [ 1.420119] Uniform CD-ROM driver Revision: 3.20 [ 1.425475] sr 0:0:0:0: Attached scsi CD-ROM sr0 [ 1.435767] sr 0:0:0:0: Attached scsi generic sg0 type 5 [ 1.435767] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 1.435767] ata_piix 0000:00:1f.2: MAP [ P0 P2 -- -- ] [ 1.585477] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 1.585477] scsi2 : ata_piix [ 1.585477] scsi3 : ata_piix [ 1.606375] ata3: SATA max UDMA/133 cmd 0x40c8 ctl 0x40e4 bmdma 0x40a0 irq 19 [ 1.606375] ata4: SATA max UDMA/133 cmd 0x40c0 ctl 0x40e0 bmdma 0x40a8 irq 19 [ 1.787244] ata3.01: ATA-8: FUJITSU MHW2120BH, 00810013, max UDMA/100 [ 1.790833] ata3.01: 234441648 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.825977] ata3.01: configured for UDMA/100 [ 2.006570] scsi 2:0:1:0: Direct-Access ATA FUJITSU MHW2120B 0081 PQ: 0 ANSI: 5 [ 2.006570] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 2.006570] sd 2:0:1:0: [sda] Write Protect is off [ 2.023851] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.027437] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.031185] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 2.034922] sd 2:0:1:0: [sda] Write Protect is off [ 2.038613] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 2.042366] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.052325] sda: sda1 sda2 < sda5 > [ 2.052325] sd 2:0:1:0: [sda] Attached SCSI disk [ 2.061865] sd 2:0:1:0: Attached scsi generic sg1 type 0 [ 2.065056] usbcore: registered new interface driver usblcd [ 2.073430] usbcore: registered new interface driver usbled [ 2.073430] PNP: No PS/2 controller found. Probing ports directly. [ 2.074301] i8042.c: No controller found. [ 2.108449] mice: PS/2 mouse device common for all mice [ 2.108449] device-mapper: ioctl: 4.13.0-ioctl (2007-10-18) initialised: dm-devel@redhat.com [ 2.108449] EDAC MC: Ver: 2.1.0 Jun 14 2008 [ 2.135313] cpuidle: using governor ladder [ 2.135313] cpuidle: using governor menu [ 2.140750] usbcore: registered new interface driver hiddev [ 2.144532] usbcore: registered new interface driver usbhid [ 2.144535] usbhid: v2.6:USB HID core driver [ 2.153563] Advanced Linux Sound Architecture Driver Version 1.0.16. [ 2.153565] ALSA device list: [ 2.162545] No soundcards found. [ 2.162545] oprofile: using NMI interrupt. [ 2.170874] IPVS: Registered protocols (TCP, AH, ESP) [ 2.175776] IPVS: Connection hash table configured (size=4096, memory=32Kbytes) [ 2.180129] IPVS: ipvs loaded. [ 2.184407] Initializing XFRM netlink socket [ 2.185123] NET: Registered protocol family 17 [ 2.193759] NET: Registered protocol family 15 [ 2.193766] Using IPI No-Shortcut mode [ 2.202521] kjournald starting. Commit interval 5 seconds [ 2.202263] EXT3-fs: mounted filesystem with ordered data mode. [ 2.202263] VFS: Mounted root (ext3 filesystem) readonly. [ 2.202263] Freeing unused kernel memory: 332k freed [ 2.933606] SELinux: 8192 avtab hash slots, 205785 rules. [ 3.070022] SELinux: 8192 avtab hash slots, 205785 rules. [ 3.253061] SELinux: 7 users, 7 roles, 3017 types, 90 bools [ 3.257167] SELinux: 72 classes, 205785 rules [ 3.267247] SELinux: Completing initialization. [ 3.280096] SELinux: Setting up existing superblocks. [ 3.290195] SELinux: initialized (dev sda1, type ext3), uses xattr [ 3.290254] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts [ 3.290254] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs [ 3.290254] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses genfs_contexts [ 3.429217] SELinux: initialized (dev devpts, type devpts), uses transition SIDs [ 3.433256] SELinux: initialized (dev inotifyfs, type inotifyfs), uses genfs_contexts [ 3.439214] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 3.443217] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts [ 3.447244] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs [ 3.451309] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts [ 3.455477] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs [ 3.459609] SELinux: initialized (dev proc, type proc), uses genfs_contexts [ 3.467261] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts [ 3.467266] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts [ 3.467275] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts [ 3.507213] SELinux: policy loaded with handle_unknown=deny [ 3.510103] type=1403 audit(1213898964.330:2): policy loaded auid=4294967295 ses=4294967295 [ 4.630832] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 4.650832] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 9.865033] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 10.121815] power_supply ADP1: uevent [ 10.128761] power_supply ADP1: POWER_SUPPLY_NAME=ADP1 [ 10.138808] power_supply ADP1: Static prop TYPE=Mains [ 10.143132] power_supply ADP1: 1 dynamic props [ 10.143164] power_supply ADP1: prop ONLINE=1 [ 10.148951] power_supply BAT0: uevent [ 10.153172] power_supply BAT0: POWER_SUPPLY_NAME=BAT0 [ 10.158692] power_supply BAT0: Static prop TYPE=Battery [ 10.163147] power_supply BAT0: 12 dynamic props [ 10.747150] power_supply BAT0: prop STATUS=Full [ 10.747150] power_supply BAT0: prop PRESENT=1 [ 10.748009] power_supply BAT0: prop TECHNOLOGY=Unknown [ 10.751906] power_supply BAT0: prop VOLTAGE_MIN_DESIGN=10800000 [ 10.757923] power_supply BAT0: prop VOLTAGE_NOW=12524000 [ 10.759942] power_supply BAT0: prop CURRENT_NOW=0 [ 10.763759] power_supply BAT0: prop ENERGY_FULL_DESIGN=55000000 [ 10.769941] power_supply BAT0: prop ENERGY_FULL=53070000 [ 10.773707] power_supply BAT0: prop ENERGY_NOW=52350000 [ 10.777665] power_supply BAT0: prop MODEL_NAME=ASMB012 [ 10.778964] power_supply BAT0: prop MANUFACTURER=SMPN012 [ 10.782645] power_supply BAT0: prop SERIAL_NUMBER= [ 11.394035] ACPI: SSDT 3FEB8C10, 02AE (r1 APPLE Cpu0Ist 3000 INTL 20050309) [ 11.398867] ACPI: SSDT 3FEB8910, 02A0 (r1 APPLE Cpu0Cst 3001 INTL 20050309) [ 11.403428] Monitor-Mwait will be used to enter C-1 state [ 11.407117] Monitor-Mwait will be used to enter C-2 state [ 11.410782] Monitor-Mwait will be used to enter C-3 state [ 11.417256] ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) [ 11.420765] ACPI: ACPI0007:00 is registered as cooling_device0 [ 11.424195] ACPI: Processor [CPU0] (supports 8 throttling states) [ 11.428766] ACPI: SSDT 3FEB8F10, 0087 (r1 APPLE Cpu1Ist 3000 INTL 20050309) [ 11.432981] ACPI: SSDT 3FEB7F10, 0085 (r1 APPLE Cpu1Cst 3000 INTL 20050309) [ 11.438788] ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) [ 11.440854] ACPI: ACPI0007:01 is registered as cooling_device1 [ 11.444382] ACPI: Processor [CPU1] (supports 8 throttling states) [ 11.450731] input: Power Button (FF) as /class/input/input1 [ 11.507072] ACPI: Power Button (FF) [PWRF] [ 11.508963] input: Lid Switch as /class/input/input2 [ 11.512436] ACPI: Lid Switch [LID0] [ 11.516011] input: Power Button (CM) as /class/input/input3 [ 11.569843] ACPI: Power Button (CM) [PWRB] [ 11.573351] input: Sleep Button (CM) as /class/input/input4 [ 11.643717] ACPI: Sleep Button (CM) [SLPB] [ 11.644726] input: Video Bus as /class/input/input5 [ 11.706216] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no) [ 11.798657] USB Universal Host Controller Interface driver v3.0 [ 11.802494] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 11.802506] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 11.806219] uhci_hcd 0000:00:1d.0: UHCI Host Controller [ 11.810480] SELinux: initialized (dev usbfs, type usbfs), uses genfs_contexts [ 11.812196] drivers/usb/core/inode.c: creating file 'devices' [ 11.816142] drivers/usb/core/inode.c: creating file '001' [ 11.822153] uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 1 [ 11.826189] uhci_hcd 0000:00:1d.0: detected 2 ports [ 11.830225] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: cmd = 0x0000 [ 11.832298] uhci_hcd 0000:00:1d.0: Performing full reset [ 11.842292] uhci_hcd 0000:00:1d.0: irq 23, io base 0x00004080 [ 11.842368] usb usb1: default language 0x0409 [ 11.846621] usb usb1: uevent [ 11.850888] usb usb1: usb_probe_device [ 11.855033] usb usb1: configuration #1 chosen from 1 choice [ 11.859407] usb usb1: adding 1-0:1.0 (config #1, interface 0) [ 11.862203] usb 1-0:1.0: uevent [ 11.872164] hub 1-0:1.0: usb_probe_interface [ 11.872167] hub 1-0:1.0: usb_probe_interface - got id [ 11.876289] hub 1-0:1.0: USB hub found [ 11.880775] hub 1-0:1.0: 2 ports detected [ 11.884988] hub 1-0:1.0: standalone hub [ 11.889046] hub 1-0:1.0: no power switching (usb 1.0) [ 11.891502] hub 1-0:1.0: individual port over-current protection [ 11.895696] hub 1-0:1.0: power on to power good time: 2ms [ 11.901513] hub 1-0:1.0: local power source is good [ 11.905783] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 11.988253] ehci_hcd: block sizes: qh 128 qtd 96 itd 160 sitd 96 [ 12.069109] drivers/usb/core/inode.c: creating file '001' [ 12.069340] usb usb1: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.073576] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.079270] usb usb1: Product: UHCI Host Controller [ 12.083699] usb usb1: Manufacturer: Linux 2.6.26-rc6-00082-g4becd8d uhci_hcd [ 12.088164] usb usb1: SerialNumber: 0000:00:1d.0 [ 12.101329] hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 12.101329] ath_hal: module license 'Proprietary' taints kernel. [ 12.101353] uhci_hcd 0000:00:1d.0: port 2 portsc 009b,00 [ 12.111494] hub 1-0:1.0: port 2, status 0101, change 0003, 12 Mb/s [ 12.121213] ath_hal: 0.9.30.13 (AR5210, AR5211, AR5212, AR5416, RF5111, RF5112, RF2413, RF5413, RF2133) [ 12.161948] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 12.169925] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 12.174377] uhci_hcd 0000:00:1d.1: UHCI Host Controller [ 12.178899] drivers/usb/core/inode.c: creating file '002' [ 12.183330] uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 2 [ 12.188929] uhci_hcd 0000:00:1d.1: detected 2 ports [ 12.193341] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: cmd = 0x0000 [ 12.197927] uhci_hcd 0000:00:1d.1: Performing full reset [ 12.202278] uhci_hcd 0000:00:1d.1: irq 19, io base 0x00004060 [ 12.206941] usb usb2: default language 0x0409 [ 12.212768] usb usb2: uevent [ 12.215616] usb usb2: usb_probe_device [ 12.222948] usb usb2: configuration #1 chosen from 1 choice [ 12.222937] Marking TSC unstable due to: TSC halts in idle. [ 12.231325] usb usb2: adding 2-0:1.0 (config #1, interface 0) [ 12.239656] usb 2-0:1.0: uevent [ 12.243888] hub 2-0:1.0: usb_probe_interface [ 12.249297] hub 2-0:1.0: usb_probe_interface - got id [ 12.249297] hub 2-0:1.0: USB hub found [ 12.253461] hub 2-0:1.0: 2 ports detected [ 12.259392] hub 2-0:1.0: standalone hub [ 12.259394] hub 2-0:1.0: no power switching (usb 1.0) [ 12.259395] hub 2-0:1.0: individual port over-current protection [ 12.259397] hub 2-0:1.0: power on to power good time: 2ms [ 12.259406] hub 2-0:1.0: local power source is good [ 12.259408] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 12.291755] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 12.373147] drivers/usb/core/inode.c: creating file '001' [ 12.377838] usb usb2: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.382042] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.391625] usb usb2: Product: UHCI Host Controller [ 12.400637] usb usb2: Manufacturer: Linux 2.6.26-rc6-00082-g4becd8d uhci_hcd [ 12.405388] usb usb2: SerialNumber: 0000:00:1d.1 [ 12.410015] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 12.414140] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 12.418597] uhci_hcd 0000:00:1d.2: UHCI Host Controller [ 12.423093] drivers/usb/core/inode.c: creating file '003' [ 12.427547] uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 3 [ 12.428381] uhci_hcd 0000:00:1d.2: detected 2 ports [ 12.433012] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: cmd = 0x0000 [ 12.437507] uhci_hcd 0000:00:1d.2: Performing full reset [ 12.443089] uhci_hcd 0000:00:1d.2: irq 18, io base 0x00004040 [ 12.447448] usb usb3: default language 0x0409 [ 12.453113] usb usb3: uevent [ 12.457200] usb usb3: usb_probe_device [ 12.461679] usb usb3: configuration #1 chosen from 1 choice [ 12.465707] usb usb3: adding 3-0:1.0 (config #1, interface 0) [ 12.469709] usb 3-0:1.0: uevent [ 12.473654] hub 3-0:1.0: usb_probe_interface [ 12.477557] hub 3-0:1.0: usb_probe_interface - got id [ 12.481843] hub 3-0:1.0: USB hub found [ 12.485688] hub 3-0:1.0: 2 ports detected [ 12.489463] hub 3-0:1.0: standalone hub [ 12.493229] hub 3-0:1.0: no power switching (usb 1.0) [ 12.497047] hub 3-0:1.0: individual port over-current protection [ 12.501057] hub 3-0:1.0: power on to power good time: 2ms [ 12.504897] hub 3-0:1.0: local power source is good [ 12.508679] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 12.513225] usb 1-2: new full speed USB device using uhci_hcd and address 2 [ 12.516971] wlan: svn r3692 [ 12.637344] drivers/usb/core/inode.c: creating file '001' [ 12.641322] usb usb3: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.641322] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.650295] usb usb3: Product: UHCI Host Controller [ 12.654576] usb usb3: Manufacturer: Linux 2.6.26-rc6-00082-g4becd8d uhci_hcd [ 12.658947] usb usb3: SerialNumber: 0000:00:1d.2 [ 12.667526] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 12.676484] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 12.676484] uhci_hcd 0000:00:1d.3: UHCI Host Controller [ 12.676484] drivers/usb/core/inode.c: creating file '004' [ 12.686503] uhci_hcd 0000:00:1d.3: new USB bus registered, assigned bus number 4 [ 12.691008] uhci_hcd 0000:00:1d.3: detected 2 ports [ 12.695292] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: cmd = 0x0000 [ 12.695268] usb 1-2: ep0 maxpacket = 8 [ 12.704015] uhci_hcd 0000:00:1d.3: Performing full reset [ 12.708371] uhci_hcd 0000:00:1d.3: irq 16, io base 0x00004020 [ 12.712629] usb usb4: default language 0x0409 [ 12.716819] usb usb4: uevent [ 12.717183] usb usb4: usb_probe_device [ 12.721172] usb usb4: configuration #1 chosen from 1 choice [ 12.725129] usb usb4: adding 4-0:1.0 (config #1, interface 0) [ 12.729530] usb 4-0:1.0: uevent [ 12.733771] hub 4-0:1.0: usb_probe_interface [ 12.737682] hub 4-0:1.0: usb_probe_interface - got id [ 12.741588] hub 4-0:1.0: USB hub found [ 12.745417] hub 4-0:1.0: 2 ports detected [ 12.749230] hub 4-0:1.0: standalone hub [ 12.753753] hub 4-0:1.0: no power switching (usb 1.0) [ 12.757574] hub 4-0:1.0: individual port over-current protection [ 12.761728] hub 4-0:1.0: power on to power good time: 2ms [ 12.765576] hub 4-0:1.0: local power source is good [ 12.769403] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 12.783766] usb 1-2: USB quirks for this device: 2 [ 12.805556] usb 1-2: skipped 1 descriptor after interface [ 12.807160] usb 1-2: skipped 1 descriptor after interface [ 12.811160] usb 1-2: skipped 1 descriptor after interface [ 12.825367] usb 1-2: default language 0x0409 [ 12.853063] ath_pci: svn r3692 [ 12.860716] usb 1-2: uevent [ 12.870787] usb 1-2: usb_probe_device [ 12.870787] usb 1-2: configuration #1 chosen from 1 choice [ 12.878767] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 12.878767] usb 1-2:1.0: uevent [ 12.878836] usbhid 1-2:1.0: usb_probe_interface [ 12.888302] usbhid 1-2:1.0: usb_probe_interface - got id [ 12.895138] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input6 [ 12.895216] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 12.903564] drivers/usb/core/inode.c: creating file '001' [ 12.913273] usb usb4: New USB device found, idVendor=1d6b, idProduct=0001 [ 12.913273] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 12.922177] usb usb4: Product: UHCI Host Controller [ 12.925072] usb usb4: Manufacturer: Linux 2.6.26-rc6-00082-g4becd8d uhci_hcd [ 12.925072] usb usb4: SerialNumber: 0000:00:1d.3 [ 12.934423] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 12.938253] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 12.942237] ehci_hcd 0000:00:1d.7: EHCI Host Controller [ 12.942295] drivers/usb/core/inode.c: creating file '005' [ 12.942303] ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 [ 12.942312] ehci_hcd 0000:00:1d.7: reset hcs_params 0x104208 dbg=1 cc=4 pcc=2 ordered !ppc ports=8 [ 12.942316] ehci_hcd 0000:00:1d.7: reset hcc_params 6871 thresh 7 uframes 1024 64 bit addr [ 12.942347] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 12.944712] ehci_hcd 0000:00:1d.7: debug port 1 [ 12.944712] PCI: cache line size of 32 is not supported by device 0000:00:1d.7 [ 12.944712] ehci_hcd 0000:00:1d.7: supports USB remote wakeup [ 12.944712] ehci_hcd 0000:00:1d.7: irq 23, io mem 0x50405400 [ 12.944712] ehci_hcd 0000:00:1d.7: reset command 080002 (park)=0 ithresh=8 period=1024 Reset HALT [ 12.948577] ehci_hcd 0000:00:1d.7: init command 010001 (park)=0 ithresh=1 period=1024 RUN [ 12.964389] ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 [ 12.964464] usb usb5: default language 0x0409 [ 12.964549] usb usb5: uevent [ 12.964574] usb usb5: usb_probe_device [ 12.964576] usb usb5: configuration #1 chosen from 1 choice [ 12.964596] usb usb5: adding 5-0:1.0 (config #1, interface 0) [ 12.964629] usb 5-0:1.0: uevent [ 12.964649] hub 5-0:1.0: usb_probe_interface [ 12.964651] hub 5-0:1.0: usb_probe_interface - got id [ 12.964653] hub 5-0:1.0: USB hub found [ 12.964665] hub 5-0:1.0: 8 ports detected [ 12.964667] hub 5-0:1.0: standalone hub [ 12.964668] hub 5-0:1.0: no power switching (usb 1.0) [ 12.964669] hub 5-0:1.0: individual port over-current protection [ 12.964671] hub 5-0:1.0: power on to power good time: 20ms [ 12.964681] hub 5-0:1.0: local power source is good [ 12.964684] hub 5-0:1.0: trying to enable port power on non-switchable hub [ 12.966073] usb 1-2: uhci_result_common: failed with status 440000 [ 12.966083] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 12.984201] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 12.994273] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 12.995881] usb 1-2: uhci_result_common: failed with status 440000 [ 12.996878] usb 1-2: uhci_result_common: failed with status 440000 [ 12.996960] usb 1-2: adding 1-2:1.1 (config #1, interface 1) [ 12.996996] usb 1-2:1.1: uevent [ 12.997021] usbhid 1-2:1.1: usb_probe_interface [ 12.997022] usbhid 1-2:1.1: usb_probe_interface - got id [ 12.997876] usb 1-2: uhci_result_common: failed with status 440000 [ 12.998875] usb 1-2: uhci_result_common: failed with status 440000 [ 12.998959] usb 1-2: adding 1-2:1.2 (config #1, interface 2) [ 12.998993] usb 1-2:1.2: uevent [ 12.999014] usbhid 1-2:1.2: usb_probe_interface [ 12.999015] usbhid 1-2:1.2: usb_probe_interface - got id [ 12.999872] usb 1-2: uhci_result_common: failed with status 440000 [ 13.000871] usb 1-2: uhci_result_common: failed with status 440000 [ 13.001869] usb 1-2: uhci_result_common: failed with status 440000 [ 13.002867] usb 1-2: uhci_result_common: failed with status 440000 [ 13.003023] usb 1-2: uhci_result_common: failed with status 440000 [ 13.003987] usb 1-2: uhci_result_common: failed with status 440000 [ 13.004985] usb 1-2: uhci_result_common: failed with status 440000 [ 13.004993] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.004995] usb 1-2: uhci_result_common: failed with status 440000 [ 13.005121] drivers/usb/core/inode.c: creating file '002' [ 13.005317] usb 1-2: New USB device found, idVendor=05ac, idProduct=021a [ 13.005319] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 13.005321] usb 1-2: Product: Apple Internal Keyboard / Trackpad [ 13.005323] usb 1-2: Manufacturer: Apple Computer [ 13.005328] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 13.005346] uhci_hcd 0000:00:1d.1: port 2 portsc 008a,00 [ 13.005362] hub 2-0:1.0: port 2, status 0100, change 0003, 12 Mb/s [ 13.033238] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.052906] usb 1-2: uhci_result_common: failed with status 440000 [ 13.052916] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.073272] drivers/usb/core/inode.c: creating file '001' [ 13.073346] usb usb5: New USB device found, idVendor=1d6b, idProduct=0002 [ 13.073348] usb usb5: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [ 13.073350] usb usb5: Product: EHCI Host Controller [ 13.073352] usb usb5: Manufacturer: Linux 2.6.26-rc6-00082-g4becd8d ehci_hcd [ 13.073354] usb usb5: SerialNumber: 0000:00:1d.7 [ 13.103078] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.124745] usb 1-2: uhci_result_common: failed with status 440000 [ 13.124751] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.245675] ACPI: PCI Interrupt 0000:0c:03.0[A] -> GSI 19 (level, low) -> IRQ 19 [ 13.252068] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.271756] usb 1-2: uhci_result_common: failed with status 440000 [ 13.273824] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.313823] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 13.332971] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 13.332971] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 13.379299] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.406895] usb 1-2: uhci_result_common: failed with status 440000 [ 13.412970] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.462973] MadWifi: ath_attach: HAL managed transmit power control (TPC) disabled. [ 13.467647] MadWifi: ath_attach: Interference mitigation is supported. Currently disabled. [ 13.479184] MadWifi: ath_attach: Switching rfkill capability off. [ 13.502971] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 13.508608] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 13.516609] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.532483] hub 2-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [ 13.538080] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 13.544131] uhci_hcd 0000:00:1d.2: port 2 portsc 008a,00 [ 13.544107] usb 1-2: uhci_result_common: failed with status 440000 [ 13.544118] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.562158] hub 3-0:1.0: port 2, status 0100, change 0003, 12 Mb/s [ 13.568903] ath_rate_sample: 1.2 (svn r3692) [ 13.583749] wifi0: 11a rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 13.583754] wifi0: 11b rates: 1Mbps 2Mbps 5.5Mbps 11Mbps [ 13.590829] hda_codec: STAC922x, Apple subsys_id=106b1e00 [ 13.595160] wifi0: 11g rates: 1Mbps 2Mbps 5.5Mbps 11Mbps 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 13.605164] wifi0: turboA rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 13.611590] wifi0: turboG rates: 6Mbps 9Mbps 12Mbps 18Mbps 24Mbps 36Mbps 48Mbps 54Mbps [ 13.614098] wifi0: H/W encryption support: WEP AES AES_CCM TKIP [ 13.624101] wifi0: Atheros AR5418 chip found (MAC 12.10, PHY SChip 8.1, Radio 12.0) [ 13.630379] wifi0: Use hw queue 1 for WME_AC_BE traffic [ 13.632515] wifi0: Use hw queue 0 for WME_AC_BK traffic [ 13.642516] wifi0: Use hw queue 2 for WME_AC_VI traffic [ 13.648324] wifi0: Use hw queue 3 for WME_AC_VO traffic [ 13.648339] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.660013] wifi0: Use hw queue 4 for XR traffic [ 13.665771] wifi0: Use hw queue 7 for UAPSD traffic [ 13.671718] wifi0: Use hw queue 8 for CAB traffic [ 13.671761] usb 1-2: uhci_result_common: failed with status 440000 [ 13.671772] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.684148] wifi0: Use hw queue 9 for beacons [ 13.778971] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.807957] usb 1-2: uhci_result_common: failed with status 440000 [ 13.807957] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.817489] ath_pci: wifi0: Atheros 5418: mem=0x50100000, irq=17 [ 13.826816] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x100 [ 13.836792] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 13.841372] appletouch 1-2:1.1: usb_probe_interface [ 13.841372] appletouch 1-2:1.1: usb_probe_interface - got id [ 13.848156] usb 1-2: uhci_result_common: failed with status 440000 [ 13.861381] appletouch: Could not do mode read request from device (Geyser Raw mode) [ 13.861381] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 [ 13.861396] hub 4-0:1.0: port 1, status 0100, change 0003, 12 Mb/s [ 13.871491] appletouch: probe of 1-2:1.1 failed with error -12 [ 13.877789] usbcore: registered new interface driver appletouch [ 13.918017] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 13.941754] usb 1-2: uhci_result_common: failed with status 440000 [ 13.948002] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 14.026081] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 14.028002] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0000 [ 14.038020] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 001803 POWER sig=j CSC CONNECT [ 14.038586] hub 5-0:1.0: port 2, status 0501, change 0001, 480 Mb/s [ 14.054925] uhci_hcd 0000:00:1d.0: reserve dev 2 ep83-INT, period 8, phase 4, 17 us [ 14.084037] usb 1-2: uhci_result_common: failed with status 440000 [ 14.084037] uhci_hcd 0000:00:1d.0: release dev 2 ep83-INT, period 8, phase 4, 17 us [ 14.153865] hub 1-0:1.0: logical disconnect on port 2 [ 14.217148] hub 5-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x501 [ 14.227098] usb usb2: suspend_rh (auto-stop) [ 14.279996] ehci_hcd 0000:00:1d.7: port 2 full speed --> companion [ 14.285097] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003801 POWER OWNER sig=j CONNECT [ 14.296390] hub 5-0:1.0: port 2 not reset yet, waiting 50ms [ 14.355487] ehci_hcd 0000:00:1d.7: GetStatus port 2 status 003002 POWER OWNER sig=se0 CSC [ 14.360819] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 14.366043] hub 5-0:1.0: port 4, status 0501, change 0001, 480 Mb/s [ 14.529475] hub 5-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501 [ 14.595483] ehci_hcd 0000:00:1d.7: port 4 high speed [ 14.600987] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 14.668654] usb 5-4: new high speed USB device using ehci_hcd and address 3 [ 14.710923] Clocksource tsc unstable (delta = -382534193 ns) [ 14.737596] ehci_hcd 0000:00:1d.7: port 4 high speed [ 14.743304] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 14.765333] usb usb3: suspend_rh (auto-stop) [ 14.829760] usb 5-4: skipped 1 descriptor after configuration [ 14.829760] usb 5-4: skipped 4 descriptors after interface [ 14.835372] usb 5-4: skipped 1 descriptor after endpoint [ 14.841411] usb 5-4: skipped 5 descriptors after interface [ 14.852382] usb 5-4: default language 0x0409 [ 14.858106] usb 5-4: uevent [ 14.869327] usb 5-4: usb_probe_device [ 14.869327] usb 5-4: configuration #1 chosen from 1 choice [ 14.874735] ieee1394: Host added: ID:BUS[0-00:1023] GUID[0019e3fffe2ad87e] [ 14.875347] usb 5-4: adding 5-4:1.0 (config #1, interface 0) [ 14.875394] usb 5-4:1.0: uevent [ 14.875475] usb 5-4: adding 5-4:1.1 (config #1, interface 1) [ 14.875515] usb 5-4:1.1: uevent [ 14.875577] drivers/usb/core/inode.c: creating file '003' [ 14.875649] usb 5-4: New USB device found, idVendor=05ac, idProduct=8501 [ 14.875651] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 14.875653] usb 5-4: Product: Built-in iSight [ 14.875654] usb 5-4: Manufacturer: Micron [ 14.875666] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 001803 POWER sig=j CSC CONNECT [ 14.875677] hub 5-0:1.0: port 6, status 0501, change 0001, 480 Mb/s [ 15.025719] usb usb4: suspend_rh (auto-stop) [ 15.045692] hub 5-0:1.0: debounce: port 6: total 100ms stable 100ms status 0x501 [ 15.107846] ehci_hcd 0000:00:1d.7: port 6 full speed --> companion [ 15.112781] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003801 POWER OWNER sig=j CONNECT [ 15.117779] usb usb3: wakeup_rh (auto-start) [ 15.122670] hub 5-0:1.0: port 6 not reset yet, waiting 50ms [ 15.187345] ehci_hcd 0000:00:1d.7: GetStatus port 6 status 003002 POWER OWNER sig=se0 CSC [ 15.192385] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT [ 15.194694] hub 5-0:1.0: port 7, status 0501, change 0001, 480 Mb/s [ 15.359078] hub 5-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 [ 15.419071] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion [ 15.423916] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT [ 15.428797] usb usb4: wakeup_rh (auto-start) [ 15.433653] hub 5-0:1.0: port 7 not reset yet, waiting 50ms [ 15.484752] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC [ 15.489760] hub 1-0:1.0: state 7 ports 2 chg 0004 evt 0004 [ 15.494627] uhci_hcd 0000:00:1d.0: port 2 portsc 0093,00 [ 15.499489] hub 1-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 15.509447] usb 1-2: USB disconnect, address 2 [ 15.514194] usb 1-2: unregistering device [ 15.518954] usb 1-2: usb_disable_device nuking all URBs [ 15.523628] usb 1-2: unregistering interface 1-2:1.0 [ 15.543508] usb 1-2:1.0: uevent [ 15.548121] usb 1-2: unregistering interface 1-2:1.1 [ 15.549248] usb 1-2:1.1: uevent [ 15.557277] usb 1-2: unregistering interface 1-2:1.2 [ 15.561955] usb 1-2:1.2: uevent [ 15.572315] usb 1-2: uevent [ 15.736024] hub 1-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 15.855570] usb 1-2: new full speed USB device using uhci_hcd and address 3 [ 15.994876] usb 1-2: ep0 maxpacket = 8 [ 16.011178] usb 1-2: USB quirks for this device: 2 [ 16.034017] usb 1-2: skipped 1 descriptor after interface [ 16.038944] usb 1-2: skipped 1 descriptor after interface [ 16.043536] usb 1-2: skipped 1 descriptor after interface [ 16.053926] usb 1-2: default language 0x0409 [ 16.081402] usb 1-2: uevent [ 16.081402] usb 1-2: usb_probe_device [ 16.087544] usb 1-2: configuration #1 chosen from 1 choice [ 16.099899] usb 1-2: adding 1-2:1.0 (config #1, interface 0) [ 16.104434] usb 1-2:1.0: uevent [ 16.108747] usbhid 1-2:1.0: usb_probe_interface [ 16.113004] usbhid 1-2:1.0: usb_probe_interface - got id [ 16.121972] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input7 [ 16.131737] uhci_hcd 0000:00:1d.0: reserve dev 3 ep83-INT, period 8, phase 4, 17 us [ 16.147311] input: USB HID v1.11 Keyboard [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 16.153396] usb 1-2: adding 1-2:1.1 (config #1, interface 1) [ 16.153465] usb 1-2:1.1: uevent [ 16.163051] usbhid 1-2:1.1: usb_probe_interface [ 16.163056] usbhid 1-2:1.1: usb_probe_interface - got id [ 16.171535] appletouch 1-2:1.1: usb_probe_interface [ 16.176049] appletouch 1-2:1.1: usb_probe_interface - got id [ 16.184789] appletouch: Geyser mode initialized. [ 16.184870] input: appletouch as /class/input/input8 [ 16.213301] usb 1-2: adding 1-2:1.2 (config #1, interface 2) [ 16.213301] usb 1-2:1.2: uevent [ 16.223950] usbhid 1-2:1.2: usb_probe_interface [ 16.223950] usbhid 1-2:1.2: usb_probe_interface - got id [ 16.233291] input: Apple Computer Apple Internal Keyboard / Trackpad as /class/input/input9 [ 16.244567] uhci_hcd 0000:00:1d.0: reserve dev 3 ep84-INT, period 8, phase 4, 12 us [ 16.260520] input: USB HID v1.11 Device [Apple Computer Apple Internal Keyboard / Trackpad] on usb-0000:00:1d.0-2 [ 16.266574] drivers/usb/core/inode.c: creating file '003' [ 16.266667] usb 1-2: New USB device found, idVendor=05ac, idProduct=021a [ 16.270921] usb 1-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.275850] usb 1-2: Product: Apple Internal Keyboard / Trackpad [ 16.278830] usb 1-2: Manufacturer: Apple Computer [ 16.288822] hub 5-0:1.0: state 7 ports 8 chg 0000 evt fe80 [ 16.288843] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 16.293321] uhci_hcd 0000:00:1d.2: port 2 portsc 0093,00 [ 16.297814] hub 3-0:1.0: port 2, status 0101, change 0001, 12 Mb/s [ 16.468002] hub 3-0:1.0: debounce: port 2: total 100ms stable 100ms status 0x101 [ 16.587993] usb 3-2: new full speed USB device using uhci_hcd and address 2 [ 16.727984] usb 3-2: ep0 maxpacket = 8 [ 16.756427] usb 3-2: skipped 1 descriptor after interface [ 16.766026] usb 3-2: default language 0x0409 [ 16.790208] usb 3-2: uevent [ 16.790208] usb 3-2: usb_probe_device [ 16.790208] usb 3-2: configuration #1 chosen from 1 choice [ 16.800989] hub 2-0:1.0: hub_suspend [ 16.800994] usb usb2: bus auto-suspend [ 16.800996] usb usb2: suspend_rh [ 16.826948] usb 3-2: adding 3-2:1.0 (config #1, interface 0) [ 16.834178] usb 3-2:1.0: uevent [ 16.834178] usbhid 3-2:1.0: usb_probe_interface [ 16.834187] usbhid 3-2:1.0: usb_probe_interface - got id [ 16.852337] drivers/usb/core/file.c: looking for a minor, starting at 0 [ 16.852337] hiddev0: USB HID v1.11 Device [Apple Computer, Inc. IR Receiver] on usb-0000:00:1d.2-2 [ 16.859288] drivers/usb/core/inode.c: creating file '002' [ 16.869158] usb 3-2: New USB device found, idVendor=05ac, idProduct=8240 [ 16.879158] usb 3-2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 16.879158] usb 3-2: Product: IR Receiver [ 16.879158] usb 3-2: Manufacturer: Apple Computer, Inc. [ 16.883472] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 16.890157] uvcvideo 5-4:1.0: usb_probe_interface [ 16.890157] uvcvideo 5-4:1.0: usb_probe_interface - got id [ 16.890157] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 16.890157] usb usb2: usb auto-resume [ 16.890157] usb usb2: wakeup_rh [ 16.909743] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 [ 16.925888] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 16.930168] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 16.940958] input: Built-in iSight as /class/input/input10 [ 16.945721] hub 2-0:1.0: hub_resume [ 16.950867] usb 5-4: link qh64-0001/f54a3100 start 63 [1/0 us] [ 16.960690] usbcore: registered new interface driver uvcvideo [ 16.962215] USB Video Class driver (SVN r212) [ 17.101330] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 17.219000] usb 4-1: new full speed USB device using uhci_hcd and address 2 [ 17.424212] usb 4-1: skipped 1 descriptor after interface [ 17.424212] usb 4-1: uevent [ 17.433279] usb 4-1: usb_probe_device [ 17.437528] usb 4-1: configuration #1 chosen from 1 choice [ 17.451673] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 17.455882] usb 4-1:1.0: uevent [ 17.459969] usbhid 4-1:1.0: usb_probe_interface [ 17.462680] usbhid 4-1:1.0: usb_probe_interface - got id [ 17.486611] drivers/hid/usbhid/hid-core.c: couldn't find an input interrupt endpoint [ 17.486611] drivers/usb/core/inode.c: creating file '002' [ 17.492471] usb 4-1: New USB device found, idVendor=05ac, idProduct=1000 [ 17.502381] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 17.502381] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 17.957035] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs [ 17.981544] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0010 [ 17.981544] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001002 POWER sig=se0 CSC [ 17.991146] hub 5-0:1.0: port 4, status 0100, change 0001, 12 Mb/s [ 18.001121] usb 5-4: USB disconnect, address 3 [ 18.001130] usb 5-4: unregistering device [ 18.010649] usb 5-4: usb_disable_device nuking all URBs [ 18.025612] usb 5-4: unlink qh64-0001/f54a3100 start 63 [1/0 us] [ 18.030352] ehci_hcd 0000:00:1d.7: shutdown urb f5768000 ep1in-intr [ 18.030352] usb 5-4: unregistering interface 5-4:1.0 [ 18.057339] usb 5-4:1.0: uevent [ 18.057339] usb 5-4: unregistering interface 5-4:1.1 [ 18.068094] usb 5-4:1.1: uevent [ 18.068979] usb 5-4: uevent [ 18.126554] applesmc: Apple MacBook Pro detected: [ 18.126554] applesmc: - Model with accelerometer [ 18.133792] applesmc: - Model with light sensors and backlight [ 18.142597] applesmc: - Model with 12 temperature sensors [ 18.143064] applesmc: device has already been initialized (0xe0, 0x00). [ 18.147450] applesmc: device successfully initialized. [ 18.153031] applesmc: 2 fans found. [ 18.161534] input: applesmc as /class/input/input11 [ 18.189167] Registered led device: smc::kbd_backlight [ 18.193395] applesmc: driver successfully loaded. [ 18.203430] usb usb2: suspend_rh (auto-stop) [ 18.236755] Linux agpgart interface v0.103 [ 18.244309] hub 5-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x100 [ 18.353155] Symbol init_mm is marked as UNUSED, however this module is using it. [ 18.353155] This symbol will go away in the future. [ 18.364961] Please evalute if this is the right api to use and if it really is, submit a report the linux kernel mailinglist together with submitting your code for inclusion. [ 18.394034] [fglrx] Maximum main memory to use for locked dma buffers: 913 MBytes. [ 18.398766] [fglrx] ASYNCIO init succeed! [ 18.410159] [fglrx] PAT is enabled successfully! [ 18.414040] [fglrx] module loaded - fglrx 8.47.3 [Mar 29 2008] on minor 0 [ 18.703105] ip_tables: (C) 2000-2006 Netfilter Core Team [ 18.816243] nf_conntrack version 0.5.0 (16384 buckets, 65536 max) [ 18.876471] arp_tables: (C) 2002 David S. Miller [ 18.969445] ieee80211_crypt: registered algorithm 'NULL' [ 19.014001] ieee80211: 802.11 data/management/control stack, git-1.1.13 [ 19.022391] ieee80211: Copyright (C) 2004-2005 Intel Corporation [ 19.044773] ieee80211_crypt: registered algorithm 'TKIP' [ 19.129190] usbcore: registered new interface driver isight_firmware [ 19.173018] ipmi message handler version 39.2 [ 19.199762] IPMI Watchdog: driver initialized [ 19.347972] Adding 2988048k swap on /dev/disk/by-uuid/c58cdc7c-b94b-4116-9cca-bf154269e4d8. Priority:-1 extents:1 across:2988048k [ 19.495252] EXT3 FS on sda1, internal journal [ 19.738761] hub 5-0:1.0: state 7 ports 8 chg 0000 evt 0010 [ 19.738774] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001803 POWER sig=j CSC CONNECT [ 19.738787] hub 5-0:1.0: port 4, status 0501, change 0001, 480 Mb/s [ 19.937461] hub 5-0:1.0: debounce: port 4: total 100ms stable 100ms status 0x501 [ 20.004248] ehci_hcd 0000:00:1d.7: port 4 high speed [ 20.004252] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 20.069019] usb 5-4: new high speed USB device using ehci_hcd and address 6 [ 20.129626] ehci_hcd 0000:00:1d.7: port 4 high speed [ 20.129630] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 20.247391] usb 5-4: skipped 1 descriptor after configuration [ 20.247391] usb 5-4: skipped 4 descriptors after interface [ 20.247391] usb 5-4: skipped 1 descriptor after endpoint [ 20.247391] usb 5-4: skipped 5 descriptors after interface [ 20.247391] usb 5-4: default language 0x0409 [ 20.247391] usb 5-4: uevent [ 20.247391] usb 5-4: usb_probe_device [ 20.247391] usb 5-4: configuration #1 chosen from 1 choice [ 20.247391] usb 5-4: adding 5-4:1.0 (config #1, interface 0) [ 20.247391] usb 5-4:1.0: uevent [ 20.247391] uvcvideo 5-4:1.0: usb_probe_interface [ 20.247391] uvcvideo 5-4:1.0: usb_probe_interface - got id [ 20.247391] uvcvideo: Found UVC 1.00 device Built-in iSight (05ac:8501) [ 20.247391] uvcvideo: Failed to query (135) UVC control 1 (unit 0) : -32 (exp. 26). [ 20.254499] input: Built-in iSight as /class/input/input12 [ 20.330560] usb 5-4: link qh64-0001/f54a3080 start 63 [1/0 us] [ 20.330646] usb 5-4: adding 5-4:1.1 (config #1, interface 1) [ 20.330687] usb 5-4:1.1: uevent [ 20.330755] drivers/usb/core/inode.c: creating file '006' [ 20.330841] usb 5-4: New USB device found, idVendor=05ac, idProduct=8501 [ 20.330844] usb 5-4: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [ 20.330846] usb 5-4: Product: Built-in iSight [ 20.330848] usb 5-4: Manufacturer: Micron [ 22.835948] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 22.841220] appletouch: incomplete data package (first byte: 2, length: 4). [ 22.842697] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 22.848818] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 22.859926] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 22.988327] uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us [ 22.990723] uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us [ 23.269497] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 23.279954] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 23.320464] hub 2-0:1.0: hub_suspend [ 23.320472] usb usb2: bus auto-suspend [ 23.320475] usb usb2: suspend_rh [ 23.772860] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 23.795390] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 23.828047] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 24.323051] input: Pommed beeper device as /class/input/input13 [ 24.345336] usb usb2: usb auto-resume [ 24.345336] usb usb2: wakeup_rh [ 24.407826] hub 2-0:1.0: hub_resume [ 24.407826] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 24.566509] Bluetooth: Core ver 2.11 [ 24.566509] NET: Registered protocol family 31 [ 24.566509] Bluetooth: HCI device and connection manager initialized [ 24.566509] Bluetooth: HCI socket layer initialized [ 24.630638] Bluetooth: L2CAP ver 2.9 [ 24.630638] Bluetooth: L2CAP socket layer initialized [ 24.699066] Bluetooth: HIDP (Human Interface Emulation) ver 1.2 [ 24.720699] usb 4-1: uhci_result_common: failed with status 440000 [ 24.720735] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 24.743393] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 24.743415] uhci_hcd 0000:00:1d.3: port 1 portsc 008a,00 [ 24.743446] hub 4-0:1.0: port 1, status 0100, change 0003, 12 Mb/s [ 24.743451] usb 4-1: USB disconnect, address 2 [ 24.743455] usb 4-1: unregistering device [ 24.743460] usb 4-1: usb_disable_device nuking all URBs [ 24.743469] usb 4-1: unregistering interface 4-1:1.0 [ 24.743623] usb 4-1:1.0: uevent [ 24.744102] usb 4-1: uevent [ 24.780026] Bluetooth: RFCOMM socket layer initialized [ 24.780026] Bluetooth: RFCOMM TTY layer initialized [ 24.780026] Bluetooth: RFCOMM ver 1.8 [ 24.924087] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x100 [ 24.924099] hub 5-0:1.0: state 7 ports 8 chg 0000 evt ff80 [ 24.924108] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT [ 24.924119] hub 5-0:1.0: port 7, status 0501, change 0001, 480 Mb/s [ 25.082562] hub 5-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 [ 25.144639] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion [ 25.144646] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT [ 25.144651] hub 5-0:1.0: port 7 not reset yet, waiting 50ms [ 25.218743] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC [ 25.218809] hub 5-0:1.0: state 7 ports 8 chg 0000 evt fe80 [ 25.281615] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 25.281630] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 [ 25.281643] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 25.467653] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 25.569681] usb usb2: suspend_rh (auto-stop) [ 25.601331] usb 4-1: new full speed USB device using uhci_hcd and address 3 [ 25.836044] usb 4-1: skipped 1 descriptor after interface [ 25.836044] usb 4-1: uevent [ 25.836044] usb 4-1: usb_probe_device [ 25.836044] usb 4-1: configuration #1 chosen from 1 choice [ 25.836044] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 25.836044] usb 4-1:1.0: uevent [ 25.836044] usb 4-1: adding 4-1:1.1 (config #1, interface 1) [ 25.836044] usb 4-1:1.1: uevent [ 25.836044] usb 4-1: adding 4-1:1.2 (config #1, interface 2) [ 25.836044] usb 4-1:1.2: uevent [ 25.836044] drivers/usb/core/inode.c: creating file '003' [ 25.836044] usb 4-1: New USB device found, idVendor=05ac, idProduct=8205 [ 25.836044] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 25.941481] Bluetooth: HCI USB driver ver 2.9 [ 25.941481] hci_usb 4-1:1.0: usb_probe_interface [ 25.941481] hci_usb 4-1:1.0: usb_probe_interface - got id [ 25.941481] hci_usb 4-1:1.2: usb_probe_interface [ 25.941481] hci_usb 4-1:1.2: usb_probe_interface - got id [ 25.941481] usbcore: registered new interface driver hci_usb [ 25.943938] uhci_hcd 0000:00:1d.3: reserve dev 3 ep81-INT, period 1, phase 0, 23 us [ 25.943938] uhci_hcd 0000:00:1d.3: reserve dev 3 ep83-ISO, period 1, phase 0, 22 us [ 28.635828] hub 2-0:1.0: hub_suspend [ 28.635843] usb usb2: bus auto-suspend [ 28.635848] usb usb2: suspend_rh [ 30.027333] usb usb2: usb auto-resume [ 30.027344] usb usb2: wakeup_rh [ 30.079645] hub 2-0:1.0: hub_resume [ 30.079594] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 31.118320] input: Apple Computer, Inc. Mighty Mouse as /class/input/input14 [ 31.244945] usb usb2: suspend_rh (auto-stop) [ 32.391321] CPA self-test: [ 32.391379] 4k 0 large 224 gb 0 x 224[c0000000-f7c00000] miss 0 [ 32.420026] 4k 191488 large 37 gb 0 x 191525[c0000000-f7fff000] miss 0 [ 32.434907] 4k 191488 large 37 gb 0 x 191525[c0000000-f7fff000] miss 0 [ 32.434907] ok. [ 32.785102] hub 2-0:1.0: hub_suspend [ 32.785119] usb usb2: bus auto-suspend [ 32.785123] usb usb2: suspend_rh [ 33.460808] usb usb2: usb auto-resume [ 33.460808] usb usb2: wakeup_rh [ 33.503683] hub 2-0:1.0: hub_resume [ 33.503761] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 34.588861] usb usb2: suspend_rh (auto-stop) [ 34.829699] hub 2-0:1.0: hub_suspend [ 34.829715] usb usb2: bus auto-suspend [ 34.829719] usb usb2: suspend_rh [ 35.867151] usb usb2: usb auto-resume [ 35.867165] usb usb2: wakeup_rh [ 35.919521] hub 2-0:1.0: hub_resume [ 35.919589] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 36.686804] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 36.935817] hub 2-0:1.0: hub_suspend [ 36.935825] usb usb2: bus auto-suspend [ 36.935827] usb usb2: suspend_rh [ 38.892130] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 39.717454] [fglrx] Reserve Block - 0 offset = 0X7ffb000 length = 0X5000 [ 39.717454] [fglrx] Reserve Block - 1 offset = 0X0 length = 0X1000000 [ 39.717454] [fglrx] Reserve Block - 2 offset = 0X7fbb000 length = 0X40000 [ 39.731704] usb usb2: usb auto-resume [ 39.731712] usb usb2: wakeup_rh [ 39.779762] hub 2-0:1.0: hub_resume [ 39.779819] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 39.980482] [fglrx] interrupt source 20008000 successfully enabled [ 39.980482] [fglrx] enable ID = 0x00000008 [ 39.980482] [fglrx] Receive enable interrupt message with irqEnableMask: 20008000 [ 39.981227] [fglrx] interrupt source 10000000 successfully enabled [ 39.981231] [fglrx] enable ID = 0x00000009 [ 39.981236] [fglrx] Receive enable interrupt message with irqEnableMask: 10000000 [ 40.217434] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 40.218763] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 40.248006] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 40.254759] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 40.261113] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 40.269744] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 40.352709] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 40.356861] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 40.362842] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 40.962024] usb usb2: suspend_rh (auto-stop) [ 40.971965] hub 2-0:1.0: hub_suspend [ 40.971979] usb usb2: bus auto-suspend [ 40.971983] usb usb2: suspend_rh [ 45.965915] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 45.968572] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 78.526092] applesmc: wait status failed: 5 != 4 [ 78.759207] applesmc: wait status failed: c != 8 [ 118.172867] uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us [ 161.728479] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 161.737158] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 217.267563] PM: Syncing filesystems ... done. [ 218.210251] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 218.381007] Freezing user space processes ... (elapsed 0.08 seconds) done. [ 218.469034] Freezing remaining freezable tasks ... (elapsed 0.00 seconds) done. [ 218.476640] Suspending console(s) [ 218.479432] uhci_hcd 0000:00:1d.3: release dev 3 ep83-ISO, period 1, phase 0, 22 us [ 218.480379] uhci_hcd 0000:00:1d.3: release dev 3 ep81-INT, period 1, phase 0, 23 us [ 218.483868] usb 4-1: usb suspend [ 218.500762] usb 5-4: unlink qh64-0001/f54a3080 start 63 [1/0 us] [ 218.500842] usb 5-4: usb suspend [ 218.520991] uhci_hcd 0000:00:1d.2: release dev 2 ep83-INT, period 8, phase 4, 61 us [ 218.522873] usb 3-2: usb suspend [ 218.541723] uhci_hcd 0000:00:1d.0: release dev 3 ep83-INT, period 8, phase 4, 17 us [ 218.542651] uhci_hcd 0000:00:1d.0: release dev 3 ep84-INT, period 8, phase 4, 12 us [ 218.544539] usb 1-2: usb suspend [ 218.559763] hub 5-0:1.0: hub_suspend [ 218.559769] usb usb5: bus suspend [ 218.559773] ehci_hcd 0000:00:1d.7: suspend root hub [ 218.560124] hub 4-0:1.0: hub_suspend [ 218.560128] usb usb4: bus suspend [ 218.560132] usb usb4: suspend_rh [ 218.560160] hub 3-0:1.0: hub_suspend [ 218.560165] usb usb3: bus suspend [ 218.560167] usb usb3: suspend_rh [ 218.560199] hub 1-0:1.0: hub_suspend [ 218.560203] usb usb1: bus suspend [ 218.560206] usb usb1: suspend_rh [ 218.560262] sd 2:0:1:0: [sda] Synchronizing SCSI cache [ 218.560526] sd 2:0:1:0: [sda] Stopping disk [ 218.682073] ACPI: PCI interrupt for device 0000:03:00.0 disabled [ 218.699447] [fglrx] firegl_gps_setpowerdown . [ 218.722912] ACPI: PCI interrupt for device 0000:01:00.0 disabled [ 218.722943] ACPI: PCI interrupt for device 0000:00:1f.2 disabled [ 218.745538] ACPI: PCI interrupt for device 0000:00:1f.1 disabled [ 218.745708] ACPI: PCI interrupt for device 0000:00:1d.7 disabled [ 218.765291] ehci_hcd 0000:00:1d.7: --> PCI D3/wakeup [ 218.765322] uhci_hcd 0000:00:1d.3: uhci_pci_suspend [ 218.765455] ACPI: PCI interrupt for device 0000:00:1d.3 disabled [ 218.765459] uhci_hcd 0000:00:1d.3: --> PCI D0/legacy [ 218.765463] uhci_hcd 0000:00:1d.2: uhci_pci_suspend [ 218.765509] ACPI: PCI interrupt for device 0000:00:1d.2 disabled [ 218.765513] uhci_hcd 0000:00:1d.2: --> PCI D0/legacy [ 218.765517] uhci_hcd 0000:00:1d.1: uhci_pci_suspend [ 218.765563] ACPI: PCI interrupt for device 0000:00:1d.1 disabled [ 218.765567] uhci_hcd 0000:00:1d.1: --> PCI D0/legacy [ 218.765571] uhci_hcd 0000:00:1d.0: uhci_pci_suspend [ 218.765616] ACPI: PCI interrupt for device 0000:00:1d.0 disabled [ 218.765620] uhci_hcd 0000:00:1d.0: --> PCI D0/legacy [ 218.785726] ACPI: PCI interrupt for device 0000:00:1b.0 disabled [ 218.984834] ACPI: Preparing to enter system sleep state S3 [ 219.084873] Disabling non-boot CPUs ... [ 219.084888] CPU0 attaching NULL sched-domain. [ 219.084890] CPU1 attaching NULL sched-domain. [ 219.200751] CPU 1 is now offline [ 219.200754] SMP alternatives: switching to UP code [ 219.212183] CPU0 attaching NULL sched-domain. [ 219.212546] CPU1 is down [ 219.212631] Extended CMOS year: 2000 [ 219.212631] Intel machine check architecture supported. [ 219.212637] Intel machine check reporting enabled on CPU#0. [ 219.212701] Back to C! [ 219.212992] Extended CMOS year: 2000 [ 219.213089] Enabling non-boot CPUs ... [ 219.213303] CPU0 attaching NULL sched-domain. [ 219.213577] SMP alternatives: switching to SMP code [ 219.224562] Booting processor 1/1 ip 6000 [ 219.084874] Initializing CPU#1 [ 219.084874] Calibrating delay using timer specific routine.. 4322.52 BogoMIPS (lpj=21612606) [ 219.084874] CPU: L1 I cache: 32K, L1 D cache: 32K [ 219.084874] CPU: L2 cache: 4096K [ 219.084874] CPU: Physical Processor ID: 0 [ 219.084874] CPU: Processor Core ID: 1 [ 219.084874] Intel machine check architecture supported. [ 219.084874] Intel machine check reporting enabled on CPU#1. [ 219.381455] CPU1: Intel(R) Core(TM)2 CPU T7400 @ 2.16GHz stepping 06 [ 219.381494] CPU0 attaching sched-domain: [ 219.381497] domain 0: span 0-1 [ 219.381499] groups: 0 1 [ 219.381504] CPU1 attaching sched-domain: [ 219.381506] domain 0: span 0-1 [ 219.381507] groups: 1 0 [ 219.084874] CPU1 is up [ 219.393850] Switched to high resolution mode on CPU 1 [ 220.024072] ACPI: EC: non-query interrupt received, switching to interrupt mode [ 220.260462] PM: Writing back config space on device 0000:00:01.0 at offset f (was 80100, writing 8010b) [ 220.260462] PM: Writing back config space on device 0000:00:01.0 at offset a (was f, writing 0) [ 220.260462] PM: Writing back config space on device 0000:00:01.0 at offset 9 (was 1fff1, writing 47f14001) [ 220.260462] PM: Writing back config space on device 0000:00:01.0 at offset 8 (was fff0, writing 50305030) [ 220.260462] PM: Writing back config space on device 0000:00:01.0 at offset 7 (was f0, writing 3030) [ 220.260462] PM: Writing back config space on device 0000:00:01.0 at offset 6 (was 0, writing 10100) [ 220.260462] PM: Writing back config space on device 0000:00:01.0 at offset 3 (was 10000, writing 10040) [ 220.260462] PM: Writing back config space on device 0000:00:01.0 at offset 1 (was 100000, writing 100007) [ 220.260462] ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 220.260462] PCI: Setting latency timer of device 0000:00:01.0 to 64 [ 220.260462] PM: Writing back config space on device 0000:00:07.0 at offset f (was 100, writing 10b) [ 220.260462] PM: Writing back config space on device 0000:00:07.0 at offset 4 (was 0, writing 50404000) [ 220.260462] PM: Writing back config space on device 0000:00:07.0 at offset 1 (was b00000, writing b00002) [ 220.281155] PM: Writing back config space on device 0000:00:1b.0 at offset f (was 100, writing 10a) [ 220.281184] PM: Writing back config space on device 0000:00:1b.0 at offset 4 (was 4, writing 50400004) [ 220.281192] PM: Writing back config space on device 0000:00:1b.0 at offset 3 (was 0, writing 40) [ 220.281203] PM: Writing back config space on device 0000:00:1b.0 at offset 1 (was 100000, writing 100002) [ 220.281236] ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 [ 220.281248] PCI: Setting latency timer of device 0000:00:1b.0 to 64 [ 220.462047] PM: Writing back config space on device 0000:00:1c.0 at offset 9 (was 10001, writing 50515051) [ 220.462057] PM: Writing back config space on device 0000:00:1c.0 at offset 8 (was 0, writing 50205020) [ 220.462066] PM: Writing back config space on device 0000:00:1c.0 at offset 7 (was 20000000, writing 2020) [ 220.462080] PM: Writing back config space on device 0000:00:1c.0 at offset 3 (was 810000, writing 810040) [ 220.462090] PM: Writing back config space on device 0000:00:1c.0 at offset 1 (was 100000, writing 100007) [ 220.462160] ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 220.462171] PCI: Setting latency timer of device 0000:00:1c.0 to 64 [ 220.462205] PM: Writing back config space on device 0000:00:1c.1 at offset 9 (was 10001, writing 1fff1) [ 220.462214] PM: Writing back config space on device 0000:00:1c.1 at offset 8 (was 0, writing 50105010) [ 220.462222] PM: Writing back config space on device 0000:00:1c.1 at offset 7 (was 20000000, writing 200000f0) [ 220.462237] PM: Writing back config space on device 0000:00:1c.1 at offset 3 (was 810000, writing 810040) [ 220.462247] PM: Writing back config space on device 0000:00:1c.1 at offset 1 (was 100000, writing 100007) [ 220.462305] ACPI: PCI Interrupt 0000:00:1c.1[B] -> GSI 16 (level, low) -> IRQ 16 [ 220.462315] PCI: Setting latency timer of device 0000:00:1c.1 to 64 [ 220.462349] PM: Writing back config space on device 0000:00:1c.2 at offset 9 (was 10001, writing 4bf14801) [ 220.462358] PM: Writing back config space on device 0000:00:1c.2 at offset 8 (was 0, writing 50004c10) [ 220.462367] PM: Writing back config space on device 0000:00:1c.2 at offset 7 (was 20000000, writing 1010) [ 220.462381] PM: Writing back config space on device 0000:00:1c.2 at offset 3 (was 810000, writing 810040) [ 220.462391] PM: Writing back config space on device 0000:00:1c.2 at offset 1 (was 100000, writing 100007) [ 220.462449] ACPI: PCI Interrupt 0000:00:1c.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 220.462458] PCI: Setting latency timer of device 0000:00:1c.2 to 64 [ 220.462466] uhci_hcd 0000:00:1d.0: PCI legacy resume [ 220.462475] ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 23 [ 220.462485] PCI: Setting latency timer of device 0000:00:1d.0 to 64 [ 220.462526] uhci_hcd 0000:00:1d.0: uhci_pci_resume [ 220.462533] uhci_hcd 0000:00:1d.0: uhci_check_and_reset_hc: legsup = 0x2000 [ 220.462537] uhci_hcd 0000:00:1d.0: Performing full reset [ 220.462563] usb usb1: root hub lost power or was reset [ 220.462567] usb usb1: suspend_rh [ 220.462601] uhci_hcd 0000:00:1d.1: PCI legacy resume [ 220.462609] ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 19 [ 220.462620] PCI: Setting latency timer of device 0000:00:1d.1 to 64 [ 220.462660] uhci_hcd 0000:00:1d.1: uhci_pci_resume [ 220.462666] uhci_hcd 0000:00:1d.1: uhci_check_and_reset_hc: legsup = 0x2000 [ 220.462669] uhci_hcd 0000:00:1d.1: Performing full reset [ 220.462694] usb usb2: root hub lost power or was reset [ 220.462697] usb usb2: suspend_rh [ 220.462715] uhci_hcd 0000:00:1d.2: PCI legacy resume [ 220.462723] ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 18 [ 220.462734] PCI: Setting latency timer of device 0000:00:1d.2 to 64 [ 220.462774] uhci_hcd 0000:00:1d.2: uhci_pci_resume [ 220.462780] uhci_hcd 0000:00:1d.2: uhci_check_and_reset_hc: legsup = 0x2000 [ 220.462784] uhci_hcd 0000:00:1d.2: Performing full reset [ 220.462808] usb usb3: root hub lost power or was reset [ 220.462811] usb usb3: suspend_rh [ 220.462841] uhci_hcd 0000:00:1d.3: PCI legacy resume [ 220.462849] ACPI: PCI Interrupt 0000:00:1d.3[D] -> GSI 16 (level, low) -> IRQ 16 [ 220.462859] PCI: Setting latency timer of device 0000:00:1d.3 to 64 [ 220.462900] uhci_hcd 0000:00:1d.3: uhci_pci_resume [ 220.462905] uhci_hcd 0000:00:1d.3: uhci_check_and_reset_hc: legsup = 0x2000 [ 220.462909] uhci_hcd 0000:00:1d.3: Performing full reset [ 220.462934] usb usb4: root hub lost power or was reset [ 220.462937] usb usb4: suspend_rh [ 220.462980] ehci_hcd 0000:00:1d.7: PCI D0, from previous PCI D3 [ 220.481204] ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 23 [ 220.481216] PCI: Setting latency timer of device 0000:00:1d.7 to 64 [ 220.481303] PM: Writing back config space on device 0000:00:1e.0 at offset 9 (was 10001, writing 1fff1) [ 220.481312] PM: Writing back config space on device 0000:00:1e.0 at offset 8 (was 0, writing 4c004c00) [ 220.481320] PM: Writing back config space on device 0000:00:1e.0 at offset 7 (was 22800000, writing 228000f0) [ 220.481339] PM: Writing back config space on device 0000:00:1e.0 at offset 1 (was 100000, writing 100007) [ 220.481369] PCI: Setting latency timer of device 0000:00:1e.0 to 64 [ 220.481441] PM: Writing back config space on device 0000:00:1f.1 at offset f (was 100, writing 10b) [ 220.481475] PM: Writing back config space on device 0000:00:1f.1 at offset 1 (was 2800001, writing 2800005) [ 220.481492] ACPI: PCI Interrupt 0000:00:1f.1[A] -> GSI 18 (level, low) -> IRQ 18 [ 220.481501] PCI: Setting latency timer of device 0000:00:1f.1 to 64 [ 220.501215] PM: Writing back config space on device 0000:00:1f.2 at offset f (was 200, writing 20b) [ 220.501250] PM: Writing back config space on device 0000:00:1f.2 at offset 1 (was 2b00003, writing 2b00007) [ 220.501277] ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 19 [ 220.501287] PCI: Setting latency timer of device 0000:00:1f.2 to 64 [ 220.504667] ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 [ 220.504679] PCI: Setting latency timer of device 0000:01:00.0 to 64 [ 220.521097] [fglrx] firegl_gps_setpowerup . [ 220.521097] PM: Writing back config space on device 0000:02:00.0 at offset f (was 100, writing 10b) [ 220.521097] PM: Writing back config space on device 0000:02:00.0 at offset c (was 0, writing fffe0000) [ 220.521097] PM: Writing back config space on device 0000:02:00.0 at offset 6 (was 1, writing 2001) [ 220.521097] PM: Writing back config space on device 0000:02:00.0 at offset 4 (was 4, writing 50200004) [ 220.521097] PM: Writing back config space on device 0000:02:00.0 at offset 3 (was 0, writing 40) [ 220.521097] PM: Writing back config space on device 0000:02:00.0 at offset 1 (was 40100000, writing 100007) [ 220.533191] PM: Writing back config space on device 0000:03:00.0 at offset f (was 1ff, writing 10a) [ 220.534637] PM: Writing back config space on device 0000:03:00.0 at offset 4 (was 4, writing 50100004) [ 220.534647] PM: Writing back config space on device 0000:03:00.0 at offset 3 (was 0, writing 40) [ 220.534660] PM: Writing back config space on device 0000:03:00.0 at offset 1 (was 100000, writing 100007) [ 220.534709] ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 17 (level, low) -> IRQ 17 [ 220.534721] PCI: Setting latency timer of device 0000:03:00.0 to 64 [ 220.554494] PM: Writing back config space on device 0000:0c:03.0 at offset 5 (was 0, writing 4c000000) [ 220.554504] PM: Writing back config space on device 0000:0c:03.0 at offset 4 (was 0, writing 4c004000) [ 220.554513] PM: Writing back config space on device 0000:0c:03.0 at offset 3 (was 0, writing f810) [ 220.554525] PM: Writing back config space on device 0000:0c:03.0 at offset 1 (was 2100000, writing 2100016) [ 220.605542] ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[19] MMIO=[4c004000-4c0047ff] Max Packet=[4096] IR/IT contexts=[4/8] [ 220.611825] sd 2:0:1:0: [sda] Starting disk [ 220.669124] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 filtered out [ 220.669131] ata1.00: ACPI cmd ef/03:44:00:00:00:a0 filtered out [ 220.718875] ata1.00: configured for UDMA/66 [ 221.134203] ata3.01: ACPI cmd ef/03:0c:00:00:00:b0 filtered out [ 221.134210] ata3.01: ACPI cmd ef/03:45:00:00:00:b0 filtered out [ 221.233265] ata3.01: configured for UDMA/100 [ 221.260079] sd 2:0:1:0: [sda] 234441648 512-byte hardware sectors (120034 MB) [ 221.260144] sd 2:0:1:0: [sda] Write Protect is off [ 221.260149] sd 2:0:1:0: [sda] Mode Sense: 00 3a 00 00 [ 221.260250] sd 2:0:1:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 221.260305] usb usb1: usb resume [ 221.260310] usb usb1: wakeup_rh [ 221.303226] hub 1-0:1.0: hub_reset_resume [ 221.303232] hub 1-0:1.0: trying to enable port power on non-switchable hub [ 221.413246] usb usb2: usb resume [ 221.413250] usb usb2: wakeup_rh [ 221.463223] hub 2-0:1.0: hub_reset_resume [ 221.463227] hub 2-0:1.0: trying to enable port power on non-switchable hub [ 221.573233] usb usb3: usb resume [ 221.573238] usb usb3: wakeup_rh [ 221.623223] hub 3-0:1.0: hub_reset_resume [ 221.623227] hub 3-0:1.0: trying to enable port power on non-switchable hub [ 221.733230] usb usb4: usb resume [ 221.733235] usb usb4: wakeup_rh [ 221.783231] hub 4-0:1.0: hub_reset_resume [ 221.783237] hub 4-0:1.0: trying to enable port power on non-switchable hub [ 221.893183] hub 4-0:1.0: logical disconnect on port 1 [ 221.893239] usb usb5: usb resume [ 221.893244] ehci_hcd 0000:00:1d.7: resume root hub [ 221.971203] hub 5-0:1.0: hub_resume [ 221.971311] uhci_hcd 0000:00:1d.0: port 2 portsc 0099,00 [ 221.991075] usb 1-2: finish reset-resume [ 222.110796] usb 1-2: reset full speed USB device using uhci_hcd and address 3 [ 222.250205] usb 1-2: ep0 maxpacket = 8 [ 222.273814] usb 1-2: manual set_interface for iface 0, alt 0 [ 222.275628] usb 1-2: manual set_interface for iface 1, alt 0 [ 222.277596] usb 1-2: manual set_interface for iface 2, alt 0 [ 222.280523] uhci_hcd 0000:00:1d.0: reserve dev 3 ep83-INT, period 8, phase 4, 17 us [ 222.282335] appletouch: Geyser mode initialized. [ 222.283243] uhci_hcd 0000:00:1d.0: reserve dev 3 ep84-INT, period 8, phase 4, 12 us [ 222.283243] uhci_hcd 0000:00:1d.2: port 2 portsc 0099,00 [ 222.299176] usb 3-2: finish reset-resume [ 222.418927] usb 3-2: reset full speed USB device using uhci_hcd and address 2 [ 222.498546] usb usb2: suspend_rh (auto-stop) [ 222.558245] usb 3-2: ep0 maxpacket = 8 [ 222.574877] usb 3-2: manual set_interface for iface 0, alt 0 [ 222.577798] uhci_hcd 0000:00:1d.2: reserve dev 2 ep83-INT, period 8, phase 4, 61 us [ 222.577798] applesmc: device has already been initialized (0xe0, 0x00). [ 222.577798] usb 5-4: usb resume [ 222.617741] ehci_hcd 0000:00:1d.7: GetStatus port 4 status 001005 POWER sig=se0 PE CONNECT [ 222.637596] usb 5-4: finish resume [ 222.637738] ehci_hcd 0000:00:1d.7: reused qh f54a3080 schedule [ 222.637744] usb 5-4: link qh64-0001/f54a3080 start 63 [1/0 us] [ 222.639558] Restarting tasks ... <7>hub 1-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 222.745204] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 222.745239] hub 3-0:1.0: state 7 ports 2 chg 0000 evt 0004 [ 222.745270] hub 4-0:1.0: state 7 ports 2 chg 0002 evt 0002 [ 222.745285] uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00 [ 222.745315] hub 4-0:1.0: port 1, status 0101, change 0003, 12 Mb/s [ 222.745321] usb 4-1: USB disconnect, address 3 [ 222.745324] usb 4-1: unregistering device [ 222.745329] usb 4-1: usb_disable_device nuking all URBs [ 222.745349] usb 4-1: unregistering interface 4-1:1.0 [ 222.803557] done. [ 222.901030] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 222.911068] appletouch: incomplete data package (first byte: 2, length: 4). [ 223.008739] usb 4-1:1.0: uevent [ 223.009135] usb 4-1: unregistering interface 4-1:1.1 [ 223.009135] usb 4-1:1.1: uevent [ 223.009135] usb 4-1: unregistering interface 4-1:1.2 [ 223.009135] usb 4-1:1.2: uevent [ 223.012908] usb 4-1: uevent [ 223.191476] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 223.307931] usb 4-1: new full speed USB device using uhci_hcd and address 4 [ 223.310603] usb 4-1: uhci_result_common: failed with status 440000 [ 223.313448] usb 4-1: uhci_result_common: failed with status 440000 [ 223.316884] usb 4-1: uhci_result_common: failed with status 440000 [ 223.379935] hub 4-0:1.0: unable to enumerate USB device on port 1 [ 223.379935] hub 5-0:1.0: state 7 ports 8 chg 0000 evt ff80 [ 223.379935] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT [ 223.379935] hub 5-0:1.0: port 7, status 0501, change 0001, 480 Mb/s [ 223.544994] hub 5-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 [ 223.614004] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion [ 223.614013] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT [ 223.614022] hub 5-0:1.0: port 7 not reset yet, waiting 50ms [ 223.686171] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC [ 223.686250] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 223.686264] uhci_hcd 0000:00:1d.3: port 1 portsc 0093,00 [ 223.690268] hub 4-0:1.0: port 1, status 0101, change 0001, 12 Mb/s [ 223.853963] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 223.983849] usb 4-1: new full speed USB device using uhci_hcd and address 5 [ 224.199763] usb 4-1: skipped 1 descriptor after interface [ 224.199763] usb 4-1: skipped 1 descriptor after interface [ 224.199763] usb 4-1: uevent [ 224.199763] usb 4-1: usb_probe_device [ 224.199763] usb 4-1: configuration #1 chosen from 1 choice [ 224.201330] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 224.201330] usb 4-1:1.0: uevent [ 224.201330] usbhid 4-1:1.0: usb_probe_interface [ 224.201330] usbhid 4-1:1.0: usb_probe_interface - got id [ 224.233740] input: HID 05ac:1000 as /class/input/input15 [ 224.245883] uhci_hcd 0000:00:1d.3: reserve dev 5 ep81-INT, period 1, phase 0, 23 us [ 224.251113] input: USB HID v1.11 Keyboard [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 224.251258] usb 4-1: adding 4-1:1.1 (config #1, interface 1) [ 224.251340] usb 4-1:1.1: uevent [ 224.251389] usbhid 4-1:1.1: usb_probe_interface [ 224.251394] usbhid 4-1:1.1: usb_probe_interface - got id [ 224.266534] input: HID 05ac:1000 as /class/input/input16 [ 224.283407] uhci_hcd 0000:00:1d.3: reserve dev 5 ep82-INT, period 1, phase 0, 23 us [ 224.301780] input: USB HID v1.11 Mouse [HID 05ac:1000] on usb-0000:00:1d.3-1 [ 224.301780] drivers/usb/core/inode.c: creating file '005' [ 224.301780] usb 4-1: New USB device found, idVendor=05ac, idProduct=1000 [ 224.301780] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 224.301780] hub 5-0:1.0: state 7 ports 8 chg 0000 evt fe80 [ 226.203324] hub 2-0:1.0: hub_suspend [ 226.203324] usb usb2: bus auto-suspend [ 226.203324] usb usb2: suspend_rh [ 261.876741] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 261.880612] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 263.222379] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 263.230853] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 263.821770] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 263.826261] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 265.215829] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 265.217866] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 274.190425] uhci_hcd 0000:00:1d.0: release dev 3 ep81-INT, period 1, phase 0, 61 us [ 274.193537] uhci_hcd 0000:00:1d.0: reserve dev 3 ep81-INT, period 1, phase 0, 61 us [ 280.794293] type=1404 audit(1213899237.061:3): enforcing=0 old_enforcing=1 auid=4294967295 ses=4294967295 [ 280.794354] type=1300 audit(1213899237.061:3): arch=40000003 syscall=4 success=yes exit=1 a0=3 a1=bfd0d608 a2=1 a3=bfd0d608 items=0 ppid=3258 pid=3508 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=4294967295 comm="setenforce" exe="/usr/sbin/setenforce" subj=a-12:sysadm_r:sysadm_t key=(null) [ 286.306660] type=1400 audit(1213899242.351:4): avc: denied { ioctl } for pid=3509 comm="hid2hci" path="/dev/bus/usb/005/006" dev=tmpfs ino=6140 scontext=a-12:sysadm_r:sysadm_t tcontext=system_u:object_r:usb_device_t tclass=chr_file [ 286.306660] type=1300 audit(1213899242.351:4): arch=40000003 syscall=54 success=yes exit=0 a0=4 a1=40085511 a2=bfd33534 a3=bfd314fe items=0 ppid=3258 pid=3509 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=4294967295 comm="hid2hci" exe="/usr/sbin/hid2hci" subj=a-12:sysadm_r:sysadm_t key=(null) [ 286.306660] usb usb2: usb auto-resume [ 286.306660] usb usb2: wakeup_rh [ 286.358629] hub 2-0:1.0: hub_resume [ 286.358629] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 286.376949] usb 4-1: uhci_result_common: failed with status 440000 [ 286.377821] usb 4-1: usbfs: USBDEVFS_CONTROL failed cmd hid2hci rqt 64 rq 0 len 0 ret -84 [ 286.379108] usb 4-1: uhci_result_common: failed with status 440000 [ 286.379127] uhci_hcd 0000:00:1d.3: release dev 5 ep81-INT, period 1, phase 0, 23 us [ 286.379133] usb 4-1: uhci_result_common: failed with status 440000 [ 286.379146] uhci_hcd 0000:00:1d.3: release dev 5 ep82-INT, period 1, phase 0, 23 us [ 286.396900] uhci_hcd 0000:00:1d.3: reserve dev 5 ep81-INT, period 1, phase 0, 23 us [ 286.396915] uhci_hcd 0000:00:1d.3: reserve dev 5 ep82-INT, period 1, phase 0, 23 us [ 286.402815] usb 4-1: uhci_result_common: failed with status 440000 [ 286.402815] uhci_hcd 0000:00:1d.3: release dev 5 ep81-INT, period 1, phase 0, 23 us [ 286.402815] usb 4-1: uhci_result_common: failed with status 440000 [ 286.402815] uhci_hcd 0000:00:1d.3: release dev 5 ep82-INT, period 1, phase 0, 23 us [ 286.415793] hub 5-0:1.0: state 7 ports 8 chg 0000 evt ff80 [ 286.415793] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 001803 POWER sig=j CSC CONNECT [ 286.415793] hub 5-0:1.0: port 7, status 0501, change 0001, 480 Mb/s [ 286.429932] uhci_hcd 0000:00:1d.3: reserve dev 5 ep81-INT, period 1, phase 0, 23 us [ 286.429947] uhci_hcd 0000:00:1d.3: reserve dev 5 ep82-INT, period 1, phase 0, 23 us [ 286.438415] usb 4-1: uhci_result_common: failed with status 440000 [ 286.438415] uhci_hcd 0000:00:1d.3: release dev 5 ep81-INT, period 1, phase 0, 23 us [ 286.438415] usb 4-1: uhci_result_common: failed with status 440000 [ 286.438415] uhci_hcd 0000:00:1d.3: release dev 5 ep82-INT, period 1, phase 0, 23 us [ 286.493336] uhci_hcd 0000:00:1d.3: reserve dev 5 ep81-INT, period 1, phase 0, 23 us [ 286.493353] uhci_hcd 0000:00:1d.3: reserve dev 5 ep82-INT, period 1, phase 0, 23 us [ 286.496418] usb 4-1: uhci_result_common: failed with status 440000 [ 286.496436] uhci_hcd 0000:00:1d.3: release dev 5 ep81-INT, period 1, phase 0, 23 us [ 286.496442] usb 4-1: uhci_result_common: failed with status 440000 [ 286.496453] uhci_hcd 0000:00:1d.3: release dev 5 ep82-INT, period 1, phase 0, 23 us [ 286.575023] hub 5-0:1.0: debounce: port 7: total 100ms stable 100ms status 0x501 [ 286.605365] uhci_hcd 0000:00:1d.3: reserve dev 5 ep81-INT, period 1, phase 0, 23 us [ 286.605382] uhci_hcd 0000:00:1d.3: reserve dev 5 ep82-INT, period 1, phase 0, 23 us [ 286.608444] usb 4-1: uhci_result_common: failed with status 440000 [ 286.608718] uhci_hcd 0000:00:1d.3: release dev 5 ep81-INT, period 1, phase 0, 23 us [ 286.608724] usb 4-1: uhci_result_common: failed with status 440000 [ 286.608734] uhci_hcd 0000:00:1d.3: release dev 5 ep82-INT, period 1, phase 0, 23 us [ 286.639101] ehci_hcd 0000:00:1d.7: port 7 full speed --> companion [ 286.639115] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003801 POWER OWNER sig=j CONNECT [ 286.639127] hub 5-0:1.0: port 7 not reset yet, waiting 50ms [ 286.698592] ehci_hcd 0000:00:1d.7: GetStatus port 7 status 003002 POWER OWNER sig=se0 CSC [ 286.698662] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 286.698679] uhci_hcd 0000:00:1d.3: port 1 portsc 009b,00 [ 286.698706] hub 4-0:1.0: port 1, status 0101, change 0003, 12 Mb/s [ 286.698712] usb 4-1: USB disconnect, address 5 [ 286.698716] usb 4-1: unregistering device [ 286.698720] usb 4-1: usb_disable_device nuking all URBs [ 286.698736] usb 4-1: unregistering interface 4-1:1.0 [ 286.712406] usb 4-1:1.0: uevent [ 286.719386] usb 4-1: unregistering interface 4-1:1.1 [ 286.747805] usb 4-1:1.1: uevent [ 286.753590] usb 4-1: uevent [ 286.923173] hub 4-0:1.0: debounce: port 1: total 100ms stable 100ms status 0x101 [ 287.040353] usb 4-1: new full speed USB device using uhci_hcd and address 6 [ 287.250777] usb 4-1: skipped 1 descriptor after interface [ 287.250777] usb 4-1: uevent [ 287.250777] usb 4-1: usb_probe_device [ 287.250777] usb 4-1: configuration #1 chosen from 1 choice [ 287.259842] usb 4-1: adding 4-1:1.0 (config #1, interface 0) [ 287.259842] usb 4-1:1.0: uevent [ 287.259842] hci_usb 4-1:1.0: usb_probe_interface [ 287.259842] hci_usb 4-1:1.0: usb_probe_interface - got id [ 287.262569] usb 4-1: adding 4-1:1.1 (config #1, interface 1) [ 287.262654] usb 4-1:1.1: uevent [ 287.262181] uhci_hcd 0000:00:1d.3: reserve dev 6 ep81-INT, period 1, phase 0, 23 us [ 287.262181] uhci_hcd 0000:00:1d.3: reserve dev 6 ep83-ISO, period 1, phase 0, 22 us [ 287.262949] usb 4-1: adding 4-1:1.2 (config #1, interface 2) [ 287.263039] usb 4-1:1.2: uevent [ 287.263089] hci_usb 4-1:1.2: usb_probe_interface [ 287.263093] hci_usb 4-1:1.2: usb_probe_interface - got id [ 287.263206] drivers/usb/core/inode.c: creating file '006' [ 287.263360] usb 4-1: New USB device found, idVendor=05ac, idProduct=8205 [ 287.263366] usb 4-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [ 287.263380] hub 5-0:1.0: state 7 ports 8 chg 0000 evt fe80 [ 287.263400] hub 4-0:1.0: state 7 ports 2 chg 0000 evt 0002 [ 287.573940] usb usb2: suspend_rh (auto-stop) [ 288.611711] hub 2-0:1.0: hub_suspend [ 288.611728] usb usb2: bus auto-suspend [ 288.611732] usb usb2: suspend_rh [ 294.120881] usb usb2: usb auto-resume [ 294.120881] usb usb2: wakeup_rh [ 294.172696] hub 2-0:1.0: hub_resume [ 294.179790] hub 2-0:1.0: state 7 ports 2 chg 0000 evt 0000 [ 295.247970] input: Apple Computer, Inc. Mighty Mouse as /class/input/input17 [ 295.455234] usb usb2: suspend_rh (auto-stop) [ 297.050050] hub 2-0:1.0: hub_suspend [ 297.050050] usb usb2: bus auto-suspend [ 297.050050] usb usb2: suspend_rh [ 299.000490] type=1404 audit(1213899254.421:5): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295 [ 299.027752] type=1300 audit(1213899254.421:5): arch=40000003 syscall=4 success=yes exit=1 a0=3 a1=bfe47f48 a2=1 a3=bfe47f48 items=0 ppid=3258 pid=3595 auid=4294967295 uid=0 gid=0 euid=0 suid=0 fsuid=0 egid=0 sgid=0 fsgid=0 tty=pts1 ses=4294967295 comm="setenforce" exe="/usr/sbin/setenforce" subj=a-12:sysadm_r:sysadm_t key=(null)